Shaun Persaud thanks, I was about to change mine using this method. I usually get at it from inside the trunk, a little more trickier, but you saved me a headache.
@@mesosphere8099 Yup, I had to remove the trim piece from inside the trunk and remove the lights from there. It was a bit harder but better than peeling the seal off from the outside
Thank you for the video and package to do all. Need same type of package for a 2013 Açura Tsx wagon that uses some different/more leds. seeing this video is 4 years old Please include the latest and greatest for white LEDs. Hopefully have some that are super bright white for backup lights.
Hi! Thanks for watching the video! Here is the correct link to the interior kit you would install: www.precisionled.com/acura-tsx-premium-led-interior-package-2009-present.html You can add any additional LEDs using the drop down menu. Reverse lights: www.precisionled.com/acura-tsx-led-backup-reverse-lights-2009-present.html
@@PrecisionLED Thank you for the response and information on a kit to do all at once. Please understand the TSX "wagon" Does not take the same amount or possibly lights as a TSX "sedan" listed in the link. Also if it makes a difference I have a TSX wagon with a technology package. The link makes mention of base model sedan. example I have set the lights at my rear tailgate inside That may take the same lights as the doors compared to one in the sedan in the trunk. Did a little research I'm not sure if this is correct. 1) map/dome DE3175 x's 4 2) vanity 6615F x's2 3) trunk 168 x's 2 4) doors 194 x's 4 5) back up ? x's 2
@@MrJoefoefrombuffalo Hi Joe! We appreciate the information! If you would like a tailored package we can create one for you, all you would need to do is reach out to us directly at help@precisionled.com.
I’ve been trying to replace my dome light with a blue led light for a while now but when I had bought one to put in my car it didn’t work so the guy told me it could be where the lights go in that needs to be replaced but I’ve been trying to look that up and nothing comes up could u help me understand lol
No, as long as your vehicle's battery is performing efficient enough to properly run the LED kit and any other electronics in your vehicle, the battery lifespan should not be affected.
Hi, unfortunately you cannot upgrade your stock HIDs to aftermarket LEDs as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
Yes, the bulbs are direct replacements for your factory incandescents. However, we do not advertise turn signal or brake lights at the moment, as they would hyper flash when ignited.
Hi! Feel free to review this video for key differences on the difference between standard and premium LEDs: th-cam.com/video/eES-rxFew00/w-d-xo.html&ab_channel=PrecisionLED
The base package includes 2 map, 1 dome, 4 courtesy. You also have the option to add 2 license plate, 1 trunk, and 4 vanity mirror LEDs via the dropdown menus on the package.
I love you packaged it all up for us...this is how video commerce is supposed to work!
If you have the Tech Package with the back up camera do not attempt to pry off the trim piece, its sealed and does not have tabs.
Shaun Persaud thanks, I was about to change mine using this method. I usually get at it from inside the trunk, a little more trickier, but you saved me a headache.
Anytime!
Did you ever figure out how to do it?
@@mesosphere8099 Yup, I had to remove the trim piece from inside the trunk and remove the lights from there. It was a bit harder but better than peeling the seal off from the outside
Thank you for the advice!
Very helpful, just installed new LED setup for all except the door lights, will swap those soon.
We are glad we could help!
@@PrecisionLED how about door handle ambient lighting 2015 acura tlx?
Awesome guide, super helpful even years later
Super easy. Gotta love 2nd gen
Agreed 👍
The trunk light portion of the video will help me with 2014 TL, since they both use the same trunk light assembly. Thanks 👍
Glad to hear, thanks for tuning in!
This was so helpful. Thank you.
This is a really good video...Thanks;)
Thank you for the positive feedback!!
Thank you for the video and package to do all. Need same type of package for a 2013 Açura Tsx wagon that uses some different/more leds. seeing this video is 4 years old Please include the latest and greatest for white LEDs. Hopefully have some that are super bright white for backup lights.
Hi! Thanks for watching the video! Here is the correct link to the interior kit you would install:
www.precisionled.com/acura-tsx-premium-led-interior-package-2009-present.html
You can add any additional LEDs using the drop down menu.
Reverse lights:
www.precisionled.com/acura-tsx-led-backup-reverse-lights-2009-present.html
@@PrecisionLED Thank you for the response and information on a kit to do all at once. Please understand the TSX "wagon" Does not take the same amount or possibly lights as a TSX "sedan" listed in the link. Also if it makes a difference I have a TSX wagon with a technology package. The link makes mention of base model sedan. example I have set the lights at my rear tailgate inside That may take the same lights as the doors compared to one in the sedan in the trunk. Did a little research I'm not sure if this is correct.
1) map/dome DE3175 x's 4
2) vanity 6615F x's2
3) trunk 168 x's 2
4) doors 194 x's 4
5) back up ? x's 2
@@MrJoefoefrombuffalo Hi Joe! We appreciate the information! If you would like a tailored package we can create one for you, all you would need to do is reach out to us directly at help@precisionled.com.
I’ve been trying to replace my dome light with a blue led light for a while now but when I had bought one to put in my car it didn’t work so the guy told me it could be where the lights go in that needs to be replaced but I’ve been trying to look that up and nothing comes up could u help me understand lol
Do you think the 2004 tsx would be the same to take the outer cases off and on for the map lights? Mine are both out? Thanks so much for the knowledge
in your video it shows the map light to be a 194 style peanut bulb, everywhere i see on TSX map light is a festoon 3175??
This could have to do with the trim level of the TSX. Regardless, the installation process is the same!
Hello, Sorry for the stupid question. What is the difference between Standard and Premium ?
Would this affect car battery life
No, as long as your vehicle's battery is performing efficient enough to properly run the LED kit and any other electronics in your vehicle, the battery lifespan should not be affected.
¡Excellent Video! Thanks for support.
Thank you for tuning in!
Thanks!!
Great video!
Thank you for the support!
Thanks for this video 😍👌🏼
Thank you for watching! 😃
So we can't change the front door bulbs?
Very detailed, thanks a lot 👍👍👍
Thanks for tuning in!
Lol thanks I needed this
Glad we could help!
I need to know how to replace a HiD bulb in the Acura TSX 2009
Hi, unfortunately you cannot upgrade your stock HIDs to aftermarket LEDs as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
Do the bulbs just replace the factory incandescents? If I wanted to do my turn signals and brake lights would they work in the same way?
Yes, the bulbs are direct replacements for your factory incandescents. However, we do not advertise turn signal or brake lights at the moment, as they would hyper flash when ignited.
Hey great video, got a quick question for the license plate LED bulb, will a T10 or a T194 Bulb size work ? I have a 2010 TSX Base Trim. Thanks
The T194 bulb translates to a T10 fitment. Yes, this is the proper fitment for the license plate lights.
What are the sizes for the bulbs ?
Hi there what is the difference between the standard and the premium?
Hi! Feel free to review this video for key differences on the difference between standard and premium LEDs: th-cam.com/video/eES-rxFew00/w-d-xo.html&ab_channel=PrecisionLED
@@PrecisionLED Thanks!
What color tone did you guys use in the video is it the 6k or 8k?
For the installation video, the 8000K was used.
What’s the installment tool name?
We do all installations with our trim tool kit, which you can find here: www.precisionled.com/professional-trim-tool-set-3.html
How much led do the kit come with
The base package includes 2 map, 1 dome, 4 courtesy. You also have the option to add 2 license plate, 1 trunk, and 4 vanity mirror LEDs via the dropdown menus on the package.