This was a good one. I'm an old school BMX'er from the late 80s/early 90s and just getting back into it and I understand what a freecoaster is but didn't really have any idea how they worked technically so this was awesome for me. I really like that you know all about stuff you personally don't use as well, really shows your depth of knowledge. Cheers.
I've fallin in love with freecoasters. it is definitely a learning curve and is something that you just get accustomed to over time. Thanks so much for this tutorial!
I I just watched a complete tutorial step by step of how to take your washers out to adjust slack, but I don't trust anyone's how-to's until I see Alf do it! Speaks volumes for what you do. Thx for the help my G!
This video helped me fix the promo freemix hub I got from a buddy for cheap so happy I have a coaster with consistent slack now before it would take like half a crank or 3 whole rotations to engage now it engages Everytime with a half crank luh u Alf 💞💞💞
Really influenced me to get a freecoaster. I've been on the edge because it's a big expense to me as a high school student but I think imma go with the Primo Freemix. go big or go home
I have a WTP on my Kink and I hate it. It’s got about 2/3-3/4 of a full rotation of slack that you have to push through before you’re applying power again. Unless I’m doing a trick where I’m really moving, I end up having to put a foot down before it reengages again half the time. My buddies bike I learned to freecoaster on was only maybe 1/5 of a rotation. I’m going to be adding a few washers/spacers to mine to fix it this week
Thank you very much alfredo, idk why if your wheel isn't spinning smooth make sure to put in the clutch in your hub before anything then pound it in/ make sure it's straight
Great video, it brought out my inner engineering mechanic nerd :) When you mentioned that the washer only grips the inner race, I was like "Hell yeah" XD I did my apprenticeship in a paper mill with some hella bearings. Tony might help you out if you do a tech video on replacing a cassette :)
Your vids are so good that I watched the entire video even though I don't have a free coaster. 😂 liked the vid. Keep up the good work! Btw make a video on putting on hubs
Reminder. When rolling backwards when using a coaster. YOU DO NOT USE PEDAL PRESSURE TO RIDE OUT OF A FAKIE. HALF CAB OR SLIDE OUT. When the hub is rolling backwards and you put pedal pressure. That clutch is getting the splines on it worn down. Eventually the clutch won't engage and give you pedal pressure. It'll feel like it not catching, and at that point, your clutch is trashed.
I have a Cinema FX Freecoaster wheel and all my spokes are evenly tightened but my wheel still wobbles a little. I think it's wobbling on the axel but I've taken apart the wheel and made sure all the components of the hub are tight. What do I do?
Hey Alfredo Mancuso, I know you are very busy but I hope I´ll help me out with my Primo Freecoaster Problems. I watched the Video multiple times but some Problems still exist. Problem 1: When I removed the conut and the Driver I wasn´t able to remove the axle with mens power -> question: can I use a hammer for or will it destroy the coaster? Problem 2: When I reinstall the Driver and the conut, there is space between the Driver and the conut... I can´t tighten it and If I reinstall the whole wheal it woombles around even if I tighten the nuts af. I hope you can help me out bro b,ecause you are the best teacher in the world ;) Sorry for my bad english, I hope it´s ok to read.
I just bought a Cinema ZX Freecoaster and I have been told if i dont remove the lockring and washer behind the driver that my driver side bearing will blow out quickly. Should I be concerned? Not sure if i should leave it or remove it, because now im afraid im riding on a time bomb. Any advice?
hey men i have the Sunday free coaster it dose not have a lot of slack. I want to add slack but it is not an adjustable free coaster can it be adjusted by putting or taking off spacers? if so ow would i do this? love the vid man keep it up.
Can you replace just the springs that hold the clutch centered? One of the little balls popped out of the bolt that holds it in and I just removed the bolt and put it back in and put the clutch over and it has been working fine. Will I need to replace my hub or can I still ride on it?
hey Alfredo! Im planning to give my old free coaster to a friend because I've upgraded mine, the only problem is he rides RHD and I ride LHD if I where to get an RHD clutch and driver for the hub could I theoretically swap the drive side of the hub?
one thing about waiting for uploads living in Baltimore is waiting all day lol so if the springs get destroyed it basically will turn into a cassette and not free coast anymore or did I listen to it wrong? I usually watch some of the tech vids a few times just to have a better understanding
So to get this clear when you go backwards the clutch disengages and threads way until it stops at the end of the threads. Then when you go there pedal for ward the clutch threads back up to the driver and depending on how much distance is between the driver and clutch depends on the slack?
It is recommended to wipe and re-grease it after it breaks in and then every 2 months if you ride it a lot... otherwise every 5 months (or something like that). Also if you ride in a rainy weather and it gets soaked you should do it asap. They also recommended to put tons of grease on the driver, in the clutch, hub shell, on spacers, on the clutch threads etc. This is what they told me in my local store (Evolution), in the Source BMX and the guy from BSD. Also Dan's Comp recommends pretty much the same. This is how i do it now and what i heard works for others... so i would stick to that.
Hey Alfredo! Could you do a BMX shoes for brakeless riding tech thursday? I think a lot of people would like to get some info about sturdy shoes for riding. (Maybe you could collect some experiences from some of your rider friends.) Cheers! Tom
My freecoaster is not working when i put pressure on the pedals , it back pedals as though it was a cassette. If i stand off the bike and roll it back it works fine, do i need to adjust slack/remove one of the washers??
So I have the shadow conspiracy freecoaster, and it's been acting up. The slack is huge in certain positions of the driver. For example, in right pedal forward, if you pedal, the slack can go up to 3 full cranks. What's wrong with my Hub? What do I do?
Alfredo what kind of bearing gos into the driver mine blew out and need to get a new one but not sure what to buy I have demolition rotator hub? Please help
i have a "bulls pope street" freecoaster bike and it has literally NO slack... can you add slack to every freecoaster without damaging it ? or are there types which cannot get changed ? :D
my coaster hasn't given me any issues in three years but all of the sudden it's starting to take a whole crank for it to engage, any tips on how to fix that?
So say you've got a free coaster and you disengage it then quarter turn to engage it but you stop pedalling at the bottom of a pedal stroke then do to pedal again and sometimes there not much slack but other times it doesn't engage for a few pedal strokes that have a little pressure and tries to engage
Sam Pring I've seen this happen before, I'm not sure what causes it, but it might have to do with how many slack rings you have in the hub, I'm pretty sure if there's no slack rings in there with full slack, when you pedal backwards it feels like it does what you're describing but I'm not exactly sure.
+ Alfredo Mancuso I have considered getting one but don't know about the slack factor. Can you make it almost engage instantly? And what about the Profile FC? I heard it is the best of both without slack if you set it prior to your trick/s
Yes you can make it engage almost like a cassette but it will engage a lot when you go backwards since it's very hard to keep your feet perfectly still at all times (for example when landing hard from a 180). If you want to try a coaster with pawls I recommend the Saltplus Trapez, it has a smaller slack and I think you can even make it a cassette hub if you do not like it as a coaster.
Slack is your friend with a freecoaster, no slack being your enemy. Without slack, you're going to end up accidently applying pressure on the pedals when you land tricks such as a 180, the clutch will engage, and you're getting blown off the back on the regs = not fun. If you want to imagine how a coaster feels without buying one first then remove your chain and boom... it's pretty much that with the ability to engage and pedal still. You don't want to use pedal pressure for tricks with a coaster, so if you're someone who uses pressure for pop in half cabs, etc then something to bare in mind is that you will have to adapt how you do certain things to suit.
Yes... I ran an old trapez, and you can switch between coaster and cassette... great hubs however I personally blew through two axles in a year, replacement axle sets run at £60 in the U.K. due to individual axles not being stocked by retailer due to their rare use... having bought one I opted not to go for another as there comes a point where I would have spent the same on axle kits as I could a new wheel.
I am looking to buy a new freecoaster and I wanted to know if the Shadow conspiracy raptor freecoaster is good. All the reviews say it is crap and dont buy it need to know!!!!
Alfredo, I hope you'd reply to my comment, how much slack do you recommend for the free coaster? Because mine ALWAYS engages when I example, do a 180 to fakie, it immediately engages....
big fan bro keep up the good shit, could you do a video on how to install and setup a gyro? just started back bmx and want the brakes for my own confidence. cheers!
Hey Alf I know this isn't relevant but do you know I'm super curious if you know if Austin augie and TCU/OSS are cool with each other or not. People are wondering on his channel and it got me thinking, I know he did the interview with Adam and was in a couple vlogs. Anyway thanks!
Alfredo necesito una ayuda por favor tengo una freecoaster Cult Match v2 que la compre hace pocos meses y bueno le hice un mantenimiento, la limpie y la reengrase y ahora cuando pedaleo hacia adelante y luego hago hacia atrás me hace un ruido fuerte y otro problema es que las freecoasters tienen un juego que es el slack q es por lo general un cuarto de vuelta, bueno en la mía hace más que eso a veces ha llegado a hacer dos vueltas o tres sin enganchar y no se como solucionarlo no se si será porque no use la grasa que tenía, pero no encuentro la solución y nadie me responde nada, saludos de Argentina!
Alfredo Mancuso es que no le saqué el slack así que no tiene espaciadores el problema empezó desde el primer mantenimiento que le hice y lo hice siguiendo este tutorial y otros y me patina hace hasta varias vueltas de palanca sin enganchar, y por dentro no hay nada gastado 🙁
I have been trying to find a video on TH-cam explaining freecoster, and this one is by far the best
Thanks so much!
This was a good one. I'm an old school BMX'er from the late 80s/early 90s and just getting back into it and I understand what a freecoaster is but didn't really have any idea how they worked technically so this was awesome for me. I really like that you know all about stuff you personally don't use as well, really shows your depth of knowledge. Cheers.
Robert Major I'll give you a thumbs up on that because it looked long and seems like you put a Lot of time into typing that.
When you own a bike shop you kinda have to know how bike parts work lmfao
I've fallin in love with freecoasters. it is definitely a learning curve and is something that you just get accustomed to over time. Thanks so much for this tutorial!
I I just watched a complete tutorial step by step of how to take your washers out to adjust slack, but I don't trust anyone's how-to's until I see Alf do it! Speaks volumes for what you do. Thx for the help my G!
Very helpful Alfredo! Wasn't sure how tight my locknut should be on my coaster driver side now I know! Thanks a bunch 👌🏽
These messages make my day!
Tony is such a wholesome character in this film. So are you my friend
🙏🏻💙
And now I finally understand how freecoasters work.
Most informative video on the topic I've seen.
Thanks again for all the tech vids, Alf.
Hellya! Glad that helps :D
This helps a lot. Thank you for the tech tips Alfredo, You are BMX. Thank you for keeping it real and true. Stay rad.
finally so i dont have to keep explaining to the broskies how to fix their coasters thanks 😄👍
haha I got your back Anthony!
This video helped me fix the promo freemix hub I got from a buddy for cheap so happy I have a coaster with consistent slack now before it would take like half a crank or 3 whole rotations to engage now it engages Everytime with a half crank luh u Alf 💞💞💞
Really influenced me to get a freecoaster. I've been on the edge because it's a big expense to me as a high school student but I think imma go with the Primo Freemix. go big or go home
yo my brother bought the freemix and broke that shit in 9 months.
WeThePeople Helix is the way to go. Two of my friends who kills freecoasters have had great luck with it.
Freemix is a solid choice mate. Riding it myself and have no problems at all.
Thanks for all you do for bmx and the kids. Appreciated
Man, so glad I found this…very well explained!
🙏🏻
I have a WTP on my Kink and I hate it. It’s got about 2/3-3/4 of a full rotation of slack that you have to push through before you’re applying power again. Unless I’m doing a trick where I’m really moving, I end up having to put a foot down before it reengages again half the time. My buddies bike I learned to freecoaster on was only maybe 1/5 of a rotation. I’m going to be adding a few washers/spacers to mine to fix it this week
Thank you very much alfredo, idk why if your wheel isn't spinning smooth make sure to put in the clutch in your hub before anything then pound it in/ make sure it's straight
Great video! I just bought a complete with a free coaster. I'll be seeing how I like it soon.
Thanks for posting Alfredo. Very informative and detailed, this helped me tremendously.
Rad!! Glad you enjoyed that Derrick :)
Thank you for this video it has helped me out so many time 😅
Thanks Al, this helped me a lot!
is Alfredo sauce good lube for a freecoaster?
I suppose
Good shit bro, never rode a freecoaster, let alone seen the inside of one lol. Stay up pimp. Shout out to Tony!
Hey great video, one side note. You need to put grease on the clutch or it can cease to the hump, and without it the clutch wears faster as well.
man you are like a bmx encyclopedia with this stuff
I was the 4,000th sub and now youre almost at 30k. Verrry niceee
Really useful and informative. Thank you
thank you Alf that was great!
Great video, it brought out my inner engineering mechanic nerd :) When you mentioned that the washer only grips the inner race, I was like "Hell yeah" XD I did my apprenticeship in a paper mill with some hella bearings. Tony might help you out if you do a tech video on replacing a cassette :)
Your vids are so good that I watched the entire video even though I don't have a free coaster. 😂 liked the vid. Keep up the good work! Btw make a video on putting on hubs
haha damn that means a lot! Thanks my dude!
Thanks Alfredo now i know 100procent how it works.
Reminder. When rolling backwards when using a coaster. YOU DO NOT USE PEDAL PRESSURE TO RIDE OUT OF A FAKIE. HALF CAB OR SLIDE OUT. When the hub is rolling backwards and you put pedal pressure. That clutch is getting the splines on it worn down. Eventually the clutch won't engage and give you pedal pressure. It'll feel like it not catching, and at that point, your clutch is trashed.
Almost 30k, congrats bro!
Thanks for the information Alfred !
anytime!
ALF GANG
Thank you so much you save me money your the best thanks for your videos
Ya casi los 30k!!! Saludos broo
I have a Cinema FX Freecoaster wheel and all my spokes are evenly tightened but my wheel still wobbles a little. I think it's wobbling on the axel but I've taken apart the wheel and made sure all the components of the hub are tight. What do I do?
Get new bearings
Thanks man this actually helped me out a ton
Cassettes ftw😛😛
Hey Alfredo Mancuso, I know you are very busy but I hope I´ll help me out with my Primo Freecoaster Problems. I watched the Video multiple times but some Problems still exist. Problem 1: When I removed the conut and the Driver I wasn´t able to remove the axle with mens power -> question: can I use a hammer for or will it destroy the coaster? Problem 2: When I reinstall the Driver and the conut, there is space between the Driver and the conut... I can´t tighten it and If I reinstall the whole wheal it woombles around even if I tighten the nuts af. I hope you can help me out bro b,ecause you are the best teacher in the world ;) Sorry for my bad english, I hope it´s ok to read.
PIMP'N Park Tool and Snapon, pro Alf.
Tone bone the realist cat out there
Thank you for this tutorial
I just bought a Cinema ZX Freecoaster and I have been told if i dont remove the lockring and washer behind the driver that my driver side bearing will blow out quickly. Should I be concerned? Not sure if i should leave it or remove it, because now im afraid im riding on a time bomb.
Any advice?
Hey Alfredo!! I'm looking for a freecoaster wheel, what can you recommend me?
Thanks!!
thanks 4 the tips Alfredo M
hey men i have the Sunday free coaster it dose not have a lot of slack. I want to add slack but it is not an adjustable free coaster can it be adjusted by putting or taking off spacers? if so ow would i do this? love the vid man keep it up.
Love cats and bmx!
🐱 🚲
needed this!!
hellya!
Can you replace just the springs that hold the clutch centered? One of the little balls popped out of the bolt that holds it in and I just removed the bolt and put it back in and put the clutch over and it has been working fine. Will I need to replace my hub or can I still ride on it?
Hay alf, can you freecoste for as long as you want or does it have a time limit?
Great video
GO ALFREDO
ayyy :)
DUDE, Thanks so much !
No prob Tony! Glad I could help :)
hey Alfredo! Im planning to give my old free coaster to a friend because I've upgraded mine, the only problem is he rides RHD and I ride LHD if I where to get an RHD clutch and driver for the hub could I theoretically swap the drive side of the hub?
one thing about waiting for uploads living in Baltimore is waiting all day lol so if the springs get destroyed it basically will turn into a cassette and not free coast anymore or did I listen to it wrong? I usually watch some of the tech vids a few times just to have a better understanding
So to get this clear when you go backwards the clutch disengages and threads way until it stops at the end of the threads. Then when you go there pedal for ward the clutch threads back up to the driver and depending on how much distance is between the driver and clutch depends on the slack?
Yes
Do complete bmx bikes come greased or will I have to take it apart to grease the parts before use. I have a Sunday 2021 street sweapwe
Aww love u Tony!!!❤️❤️❤️
btw the OSS tony hellcat beanie is amazingly comfy
Glad to hear :D
this is cool but we need a vlog homey!!!
You really know your shit man!!
Nice video man. How often do you need to re-grease the hub?
It is recommended to wipe and re-grease it after it breaks in and then every 2 months if you ride it a lot... otherwise every 5 months (or something like that). Also if you ride in a rainy weather and it gets soaked you should do it asap.
They also recommended to put tons of grease on the driver, in the clutch, hub shell, on spacers, on the clutch threads etc.
This is what they told me in my local store (Evolution), in the Source BMX and the guy from BSD. Also Dan's Comp recommends pretty much the same.
This is how i do it now and what i heard works for others... so i would stick to that.
Thanks a lot man!
Yoo great video!! Can you please do a similar video but With a cassette??
Podrías subir un video de la maza merritt por favor y explicar lo de la holgura del driver y eso... saludos y gracias de antemano
Hey Alfredo! Could you do a BMX shoes for brakeless riding tech thursday? I think a lot of people would like to get some info about sturdy shoes for riding.
(Maybe you could collect some experiences from some of your rider friends.)
Cheers! Tom
You've got it!
Cool! Thanks man!
I have the first khe reverse coaster and it still works the same as the recent ones
My freecoaster is not working when i put pressure on the pedals , it back pedals as though it was a cassette. If i stand off the bike and roll it back it works fine, do i need to adjust slack/remove one of the washers??
So I have the shadow conspiracy freecoaster, and it's been acting up. The slack is huge in certain positions of the driver. For example, in right pedal forward, if you pedal, the slack can go up to 3 full cranks. What's wrong with my Hub? What do I do?
I have the annoying clutch bite sound will a grease job get rid of the annoying clank when I stop peddling?
aaaaayyyyyy cassette boyzzz im to poor for a freeco 😅😂😂😂😂😂 keep it up mannnn
Alfredo what kind of bearing gos into the driver mine blew out and need to get a new one but not sure what to buy I have demolition rotator hub? Please help
I love your videos man cleared a lot of shit up on free coasters thanks man #ALFgang
Ayyy
+Alfredo Mancuso for real man it's been a dream to meet you Stevie and Brandon maybe one day keep making the videos and fuck the haters
I don't run a free coaster, but Tony the cat go my attention
i have a "bulls pope street" freecoaster bike and it has literally NO slack... can you add slack to every freecoaster without damaging it ? or are there types which cannot get changed ? :D
forget it alfredo, i just tried it and it worked perfectly ^^ thank you for the instruction :)) 👍🏻
my coaster hasn't given me any issues in three years but all of the sudden it's starting to take a whole crank for it to engage, any tips on how to fix that?
So say you've got a free coaster and you disengage it then quarter turn to engage it but you stop pedalling at the bottom of a pedal stroke then do to pedal again and sometimes there not much slack but other times it doesn't engage for a few pedal strokes that have a little pressure and tries to engage
Sam Pring I've seen this happen before, I'm not sure what causes it, but it might have to do with how many slack rings you have in the hub, I'm pretty sure if there's no slack rings in there with full slack, when you pedal backwards it feels like it does what you're describing but I'm not exactly sure.
How often should you grease a coaster? Thanks
Depends on usage but every couple months
Alfredo Mancuso thank u
1:09 ready, let’s go
**plays ad**
+ Alfredo Mancuso I have considered getting one but don't know about the slack factor. Can you make it almost engage instantly? And what about the Profile FC? I heard it is the best of both without slack if you set it prior to your trick/s
Yes you can make it engage almost like a cassette but it will engage a lot when you go backwards since it's very hard to keep your feet perfectly still at all times (for example when landing hard from a 180). If you want to try a coaster with pawls I recommend the Saltplus Trapez, it has a smaller slack and I think you can even make it a cassette hub if you do not like it as a coaster.
Slack is your friend with a freecoaster, no slack being your enemy. Without slack, you're going to end up accidently applying pressure on the pedals when you land tricks such as a 180, the clutch will engage, and you're getting blown off the back on the regs = not fun. If you want to imagine how a coaster feels without buying one first then remove your chain and boom... it's pretty much that with the ability to engage and pedal still. You don't want to use pedal pressure for tricks with a coaster, so if you're someone who uses pressure for pop in half cabs, etc then something to bare in mind is that you will have to adapt how you do certain things to suit.
Yes... I ran an old trapez, and you can switch between coaster and cassette... great hubs however I personally blew through two axles in a year, replacement axle sets run at £60 in the U.K. due to individual axles not being stocked by retailer due to their rare use... having bought one I opted not to go for another as there comes a point where I would have spent the same on axle kits as I could a new wheel.
I have a stolen rampage freecoaster and I can’t get the driver off do u have any advice
Can we repare the spring points on a female axe?or we are obligated to change hub
I am looking to buy a new freecoaster and I wanted to know if the Shadow conspiracy raptor freecoaster is good. All the reviews say it is crap and dont buy it need to know!!!!
Thanks very much
I'm pretty sure the colony freecoaster you had was lhd? Correct me if I'm wrong
You are correct.
I’ve got the same one.. mine doesn’t lock up when I pedal backwards, can’t figure out why
Which is better deep slack or high?
Tony cats swag is on point and can you put a free coaster on The so cal flyer
Its a 24" not a 20
Hey Alf do you know what is the loudest hub you can get but doesent cost an sh*t tone of money
Colony Wasp Hubd
Hubs
For real?
+Jamie Bales Idk if theyre the loudest, they probably aren't but they are quite loud and sound good.
It's not the smartest hub buying criteria though, is it?
Alfredo, I hope you'd reply to my comment, how much slack do you recommend for the free coaster? Because mine ALWAYS engages when I example, do a 180 to fakie, it immediately engages....
Hey Marvin, usually you want about a quarter rotation of your cranks. You might need to remove a spacer or two! +Marvin Lim
Alfredo Mancuso What happens if it's more than a quarter of slack?
It's better for you since you'll have more room for pedal adjustment when going fakie +Marvin Lim
Alfredo Mancuso Right... I really doubt mine is a quarter of slack, it sucks because when I go fakie, it immediately engages....
I'm getting the kink redwood and it will have a free coaster and I'll see if I like it or I'll just put my cassette back on
when I took the slack washer out of my hub an put everything back together it was struggling to back pedal. do you know why it would be doing this?
big fan bro keep up the good shit, could you do a video on how to install and setup a gyro? just started back bmx and want the brakes for my own confidence. cheers!
Thanks Stuart! That will be this weeks Tech Thursday 🙏🏻😁+Stuart Maxwell
He looks just like my cat Luis!😃
is it normal for a new freecoaster to have a metal rubbing noise when its almost engaged ?
So when you pedal backwards the driver engages the clutch to pedal? 5:50
Could I swap the bearings with something like reds? If so, would it improve the ride?
Not sure if they really make aftermarket bearings that improve the ride
They're too small. You could get some precision bearings made.
Hey Alf I know this isn't relevant but do you know I'm super curious if you know if Austin augie and TCU/OSS are cool with each other or not. People are wondering on his channel and it got me thinking, I know he did the interview with Adam and was in a couple vlogs. Anyway thanks!
last i heard they werent cool with each other
Alfredo said before he doesn't want to be part of it
+FvckRuben Damn.. that's what I've been hearing too, hopefully they can be though
damage done
+jerrell 92 Alfredo said he doesn't want to be apart of what?
What do you do on your free time
Hahaha that's how I feel about my cat....ur not the only one still on cassette I do want a freecoaster tho
Alf do a freecoaster give away? That would be cool
Alfredo necesito una ayuda por favor tengo una freecoaster Cult Match v2 que la compre hace pocos meses y bueno le hice un mantenimiento, la limpie y la reengrase y ahora cuando pedaleo hacia adelante y luego hago hacia atrás me hace un ruido fuerte y otro problema es que las freecoasters tienen un juego que es el slack q es por lo general un cuarto de vuelta, bueno en la mía hace más que eso a veces ha llegado a hacer dos vueltas o tres sin enganchar y no se como solucionarlo no se si será porque no use la grasa que tenía, pero no encuentro la solución y nadie me responde nada, saludos de Argentina!
Le falta mas grasa y puede que le pusiste los espaciadores mal
Alfredo Mancuso es que no le saqué el slack así que no tiene espaciadores el problema empezó desde el primer mantenimiento que le hice y lo hice siguiendo este tutorial y otros y me patina hace hasta varias vueltas de palanca sin enganchar, y por dentro no hay nada gastado 🙁
Alfredo Mancuso más grasa no haría que resbale aún más ?
Alfredo Mancuso puede ser problema de los pins que sujetan el clutch, yo alargue el muelle de dentro y me fue bien
Do a how to install cranks !