lots of crap you DONT need !! all you need on a new car is a fully enclosed clutch cover. as sand or abrasive dirt will eat your clutch up in 30 minutes with that stock open cover. i put a zenoah motor and hitek servos in mine ten years ago. havent had to take it apart one time.
Fully enclosed is the worst cover to use unless you are running in sand but if it works for you go at it. Can't go wrong with a zenoah. Hitec is a preference I don't desire. Thanks for watching.
@@stevethomas-cc5lz same here brother. I race and bash with an open carrier in dirt, grass, and asphalt. Never have I had a problem. You and I both just have different opinions.
Should i buy : I want to a 1/5 petrol rc . But all brands is out of sale in Denmark, but not this one (Roven Baja 5b) is the only one i can get in my country, should i buy it,?.. I need a replacement for my 1/8 hsp Tornado (Nitro)
Yessir. Definitely if your bashing or course racing with it. I prob will be using it for straight drag passes so not totally necessary but will prob eventually get one.
Best way to start your buggy, assuming there’s not air leaks and all is working properly: -Put the choke down -Prime between 5-10 times gently -Slowly pull the pull-starter. It’ll let fuel come in and you’ll feel a pop then stop. Sometimes it’s very faint -choke off - pull hard and should start If it never popped, check plug for fuel. It’s either flooded or lack of fuel.
I got to do is just going to change the freaking motor and put a swap it onto it's the same damn to the same piston same trust me I know Tori too many engines apart is why I get mine here that's what I'm going to do
Hey what's the break in Procedure On 1 of these because i picked one up brand new Second hand but it didn't come with any instructions Because I've been hearing a handful of things on how to break it in and also heard just run it doesn't need a break in
Hey bud. Everyone does break-in their way. Some idle for tanks on end then run rich for another 5 tanks. Some fill it and rip it. And some run rich at varying throttle for a couple tanks. It's what you feel comfy inside with that I suggest.
My dad passed away and he left me 2 of the gas powered cars well I was driving one than out of no where the controller didn’t want to work and it’s like glitchy even when I try to turn the wheels it puts the gas on do you know what could be wrong
So glad i found your channel I've been wondering about these and thinking of getting one but they're so cheap I wasn't sure if it was any good. Seems like a beast.
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
I'm thinking of buying one. Do u think it is easier to maintain than a nitro? Bcs I have a revo 3.3 and I'm restoring my dad's thunder tiger ssk
Cool. Yes gas is easier than nitro
lots of crap you DONT need !! all you need on a new car is a fully enclosed clutch cover. as sand or abrasive dirt will eat your clutch up in 30 minutes with that stock open cover. i put a zenoah motor and hitek servos in mine ten years ago. havent had to take it apart one time.
Fully enclosed is the worst cover to use unless you are running in sand but if it works for you go at it. Can't go wrong with a zenoah. Hitec is a preference I don't desire. Thanks for watching.
@@CrucialRC ive had no problem with it in 10 yrs. Nor have i had to replace any clutches.
@@stevethomas-cc5lz same here brother. I race and bash with an open carrier in dirt, grass, and asphalt. Never have I had a problem. You and I both just have different opinions.
@@CrucialRC im in the coastal bend all sand.
@@stevethomas-cc5lz gotcha
Should i buy :
I want to a 1/5 petrol rc .
But all brands is out of sale in Denmark, but not this one (Roven Baja 5b) is the only one i can get in my country, should i buy it,?..
I need a replacement for my 1/8 hsp Tornado (Nitro)
Nothing wrong w Rovan as long as you know you will have to upgrade some parts to make it reliable.
@@CrucialRC will keep that in mind, thank you good sir
The outer filter is supposed to be dry I thought
It is
Carb Setting L=1.25 H=1.5. Press bulb 3 to 4 times. Turn choke on. Crank till you hear one pop. Turn choke off then start.
If that works for you 👍🏽
@@CrucialRC OK, Just keep doing what your doing LOL
These things are cool. You think the rovan 29cc for $390 or the rovan 45cc for $750 is a better deal?
29cc all day
Great fun.... When they running that is haha. One of the coolest rcs around needs alot of maintenance. ❤
You got that right!😂😂
Sooo Cool!!! You have a track where you and other Baja owners can race? That would be a hoot!
I wish we could
Glad to see you’re still doing your thing!
Yessir. Hope all is well with you. You running nitro this season?
Very nice video bro 🔥🔥🔥
Big up
That full force front chassis brace is a nice piece i but one on my new ft
Yessir
Nice 😎👍🏾👊🏾
Thanks 💯
I Just bought a Rovan Baja 5b 29cc, can't wait for it to arrive
Fun car. Just make these changes and it should be good to go until time for an engine replacement.
When I start my fifth scale RC cars and we’ll turn what caused that
Clutch bolts backing out
@@CrucialRC thanks bro 🙏
Hello, good brother. Excuse me, what oils can be used to lubricate the air filter
Does the regular Futaba 3pm radio work for Baja?
Hey. I use pj1 filter cleaner and oil. A 3pm would work on a Baja. That would be a 3 channel transmitter. 1-steering, 2-throttle, 3-killswitch
@@CrucialRC Thank you very much, is the 3pm radio reliable?
@@CrucialRC Is it possible to send your Telegram ID, I have a few questions, I can ask more easily there
Yes any futaba is.
crucialrc118@gmail.com
A tr servo saver is rite up there with the must have upgrades for the baja
Yessir. Definitely if your bashing or course racing with it. I prob will be using it for straight drag passes so not totally necessary but will prob eventually get one.
All the basic needs..Fo sho..nice
Yessir
Should make a nice test baja....
It should Rob.
Best way to start your buggy, assuming there’s not air leaks and all is working properly:
-Put the choke down
-Prime between 5-10 times gently
-Slowly pull the pull-starter. It’ll let fuel come in and you’ll feel a pop then stop. Sometimes it’s very faint
-choke off
- pull hard and should start
If it never popped, check plug for fuel. It’s either flooded or lack of fuel.
Thanks for the tip👍🏽
It’s like god want me to build one I been looking for a video like this for weeks lol
Great! Glad I could help out MarMar👍🏽
Awesome Lance! Nice to have that sacrificial lamb in the herd!🤣
You got that right!🤣
Nice upgrades , love all my Baja’s …
Same here!
Must have is the super easy pull start. Make it so easy. Not to mention the stock pull started destroys its self in like 2 runs if that.
Good info. Thanks for sharing!
Where is link to the battery please 🙏🏾 loving you video’s 🙏🏾
Thanks www.ebay.com/itm/133204179660?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=NjINF5czRcC&sssrc=4429486&ssuid=dsQB_azbSfC&var=&widget_ver=artemis&media=COPY
I got to do is just going to change the freaking motor and put a swap it onto it's the same damn to the same piston same trust me I know Tori too many engines apart is why I get mine here that's what I'm going to do
👍🏼
Hey what's the break in Procedure On 1 of these because i picked one up brand new Second hand but it didn't come with any instructions Because I've been hearing a handful of things on how to break it in and also heard just run it doesn't need a break in
Hey bud. Everyone does break-in their way. Some idle for tanks on end then run rich for another 5 tanks. Some fill it and rip it. And some run rich at varying throttle for a couple tanks. It's what you feel comfy inside with that I suggest.
@@CrucialRC OK cool thanks
love the channel, hate that this vid cost me $450........lol
😂😂
Did you get the 29cc for that price?
Yessir if I take my time I’ll get it great video big bro
Thanks homie
@@CrucialRC Yw big bro
On what oil you running her in?
I run klotz
Notification squad 🔥🔥🔥
💪🏽💪🏽
💪🏾💯 yesssir
Thanks bro💯
Awesome 👍
Thanks bud
nice
Thanks
My dad passed away and he left me 2 of the gas powered cars well I was driving one than out of no where the controller didn’t want to work and it’s like glitchy even when I try to turn the wheels it puts the gas on do you know what could be wrong
Sorry to hear about the passing. It's possibly bad receiver or steering servo. Might be time to upgrade bro.
So glad i found your channel I've been wondering about these and thinking of getting one but they're so cheap I wasn't sure if it was any good. Seems like a beast.
No problem!! They are cheap. Just prepare for failure and you are good. Follow this guideline and you will be good
Nice just do the killer rc lid
I dont like that lid.
@CrucialRC how come ? I use the same battery fits nice with that lid. Only think sucks you have to make holes for connector and kill switch wire.
Stock cage won't fit without risers