Woodturning Jig for making one piece spoons on the lathe
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Checkout my new video
• Woodturning Female For...
I made this jig for holding spoons/scoops so they can be made in one piece on the lathe. If you make one of these I'd really like to see it, you can always share your project on my website.
Here's a link to some of the tools I used in this video,
astore.amazon.c...
I upload a new project video every Friday.
Thank you for supporting free woodworking
========================
My Etsy shop
www.etsy.com/s...
Patreon, I really appreciate your support.
/ carljacobson
Schedule demos, and one-on-one online classes
jacobson68@yahoo.com
I'm a Robust dealer if you have any questions I'd be more than happy to help.
Robust Woodturning Tools!
www.turnrobust....
Easy Wood Tools
www.easywoodtoo...
Wood Turners Wonders
woodturnerswond...
Peppermill kits
www.arizonasilh....
ChefwareKits
www.chefwareki....
Website www.thewoodshop...
Google+ plus.google.co....
Facebook / carljacobson68
Welcome to my channel, I started woodworking with my grandfather as a young boy. I continued woodworking through high school, and started woodturning after seeing a turned project in a friends shop. Some of my fondest memories are working with my grandfather in his wood shop. Being able to share our passion for woodworking, ties it all together.
~-~~-~~~-~~-~
Please watch: "Wood Turning"
• Woodturning Hybrid Res...
~-~~-~~~-~~-~
#woodturning #woodturning #woodlathe #woodturningprojects #carljacobson
Thanks Tony, don't forget to turn the band around and I put a big rubber band around it too.
A piece of the inside rubber tube of a bicycle wheel could do the job well.
It works great Ted, don't forget to turn the band around and I put a big rubber band around it too.
Thank you, I appreciate your support, and kind words.
Take care
Carl
Thanks Jim, I forgot to say something about that sorry. I put a big rubber band around it too.
Thank you Miguel, I look forward to seeing your video.
Take care, Carl
That looks like a great little tool.
I put a big rubber band around the clamp before I used it, and yes V block would be a safer way to cut this.
Don't worry too much about getting beat up (and I know you don't). For every one of those comments there's at least 3 of us silent & just being inspired by your work. I certainly wouldn't be turning at the level I am if it had not been for your videos. Thank you for your inspiration, ideas, teachings and most of all the humble approach that allows us to see a master making mistakes while retaining a good attitude - I certainly say worse things than, "You dog!" when I get a catch.
Great to see even a master like you is willing to try another method to secure an item. Derek
Just what I need. Thanks for the video Carl.
Thank you Matt,
Thanks Robbie
Take care, Carl
Sorry I forgot to say something about that, I put a big rubber band around it too.
Carl, I was looking for a jig something like the one you have in this video. It's just what I needed to explain how to hold a spoon. I see this is an old video but still has lots of value. Hope you're doing well. Thanks Sam.
Thank you Sam! It's all good here, I hope you guys are doing well too.
Thank you Philip
Thanks for your idea every time I look at your site i come away with something postive.
Does this mean that you are making spoons? :) may I come help?
Sent from my iPad
Thank you George
Thank you John
Thank you Gunter
Thank you Mike
Hi Carl,
which is again a very informative video on how to build a mount for a spoon. Thank you very much
Thank you, I forgot to say something about that, I put a big rubber band around it too.
Thank you Lolo
that's a pretty good idea for a jig for spoons
thanks for uploading
icespeckledhens Thank you
Carl
I have turned only a few spoons like this but it was always so time-consuming to make a jig. This really is so cool. Cant wait to try it. Sam
Thanks Brendan, I forgot to say something about that, I put a big rubber band around it too.
Take care,
Carl
I forgot to say something about that I put a big rubber band around it too.
I put a big rubber band around it too.
I did see that video. I'm going to give it a try.
You didn't just make a jig...you made a freakin' chuck! That alone was worth watching.
Thank you John, I put a big rubber band around the clamp before I used it. Yes you're right a V block would be a safer way to cut this.
Can you show it to us sir?
Very clever! Thank you for sharing.
Thank you!
Salut Carl, c'est une bonne idée, bravo. Lolo
Yes you would, but I put a big rubber band around anyway.
Man I'm glad you are such a good natured nice guy Carl!!! Lol. The man knows what he's doing guys, relax. Thanks for another great video Carl keep up the good work buddy!
Tim
Great job Carl! My thoughts on the slots, face down on a table saw using a sled. Wider curf on table saw blade.
The other thing I noticed, if you turn the hose clamp around so the excess clamp end would trail instead of turning into the rotation.
Always enjoy your video's, and especially with your daughter... That was awesome.
my thought too.
Thank you Robert, great idea to use the table saw. I did turn the hose clamp around and put a big rubber band on it when I was using it.
Great jig Carl, looks very effective.
take care
Mike
some great tips carl thanks for sharing
It doesn't matter much what it looks like... so long as it does the job!! And I am also going to give you enough credit, to know where the band is and where your hands are!! Keep on turning...
Larry
Thanks Tim, this is the second time this month I'm getting beat up.......lol.
Take care, Carl
Thank you
I definitely have to make this. Thanks Carl.
Also, maybe think about having the screw housing 180 degrees out from the spoon handle, and turning it around to where the tail of the hose clamp won't flare out and catch on anything.
Wow so inspirational! Thank you for sharing your knowledge
ProD Miner Thank you very much!
CARL nice job and great tip. keep on turning-----------bob
Thanks I love watching your vids I do wood work to I live NZ thanks for the tips
Thank you very much Kishore!
great idea Carl, just watch that tag end of the hose clamp
DAVE M Thank you Dave, I turned it around before I started turning.
Very handy little jig there Carl i need to make one myself too thank you for sharing!
Thank you!
I did when I used it, and put a big rubber band on too
Good job. Could I suggest turning the hose clamp around so that the tail is trailing please? I know i sound like a H&S inspector but I would hate to see the results of contact.
Best Wishes, Brendan.
I think I have one but I'll check.
Watched the video with interest.. Like the way you work keep up the good work look forward to future ones
Very nice , thanks for your time. I like .
Great jig Carl. I think I'd turn the clamp in the other direction so it was trailing as I turn though.
Just wondering if it was done on a table saw. Give wider groves for clamping. Just a thought. I will try mine that way.
Carl:
If I did this, The newspaper would read. "Man killed by flying spoon"...
I love the idea though.
Thanks,
Dennis
Dennis Adams lol Thank you Dennis
Ambrus aladarDennis Adams
Great video, but for safety reasons you might wanna turn that metal band (dont know what it's called) the otter Way around. IF you should be so unlucky to get your fingers near it it would do a lot less damage. Sorry if misspelling, im from Denmark :)
Nice video Carl.
Hi Guy, did you find a place to set up your shop?
Take care, Carl
Love your work Carl, but I'm concerned about a couple of things. 1. Already mentioned is the turning around the clamp. 2. Cutting round stock on the band saw, in my opinion, the way you were doing that is an accident waiting to happen. I would like to see you use a V block with the stock clamped down to avoid any spinning of the wood.
Nice job Carl, not prety but it has to work.
Some days ago a friend from my chanel send me a picture of one very close, will do a video of it soon.
Thanks for sharing.
Kind regards.
Great Video Carl, Thanks
Cool idea to clamp it independently of the chuck. I'd probably reverse the direction of that clamp so the tail comes out the other way just in case the cover comes off.
Congratulations Carl, I follow with great interest your work, very helpful too, Thanks
Stefano Italy
I put a big rubber band around it.
Thanks, right it doesn't have to be pretty :)
Take care, Carl
I also was concerned about the hose clamp, but you'd get nailed by the spoon handle well before you came into contact with the clamp.
You should cut the slots deeper past the band so that the band has leverage to pull inward. It looked like you stopped at the band in the sawing part of the video, though it did look like you had cut deeper in the later shot of you holding the Jig. And drilling out the center would also help.
Thanks for the info and reply!
Good idea!!!
This was a great video Carl, thank you for posting. During the video you mentioned a video of a similar chuck. I'd like to watch that video also if you happen to know the creator or yhe TH-cam channel. I realize this is a very old video by todays standards but it's worth a try to ask. Thanks!
I like your jig-a simpler solution than mine. Your jig has enough meat to allow a deeper recess for the pipe clamp so that the screw is just even with or slightly below the jig's circumference. And reversed as previously mentioned. Lee Valley now has a reusable 'stretch' tape that is perfect for replacing rubber bands...
Richard St. John Thank you Richard, I'll have to check out the stretch tape.
Trying this tomorrow!
Mark
Cool :)
Carl, I would have put the hose clamp on the other direction so that the excess was not spinning towards you but away from you making it less likely to "catch on your hand". The other thing that would make that safer is some duct tape around the pipe clamp.
I would turn that hose clamp the other way around so you don't get impaled.
Very good
Thank you
Very cool! I like to turn hairpins and their tiny diameter makes it a little hard to work with. I usually have to rough out the top, turn the pointed end all the way down and then put the thin end in the chuck, which often mars it up resulting in more sanding. Making something like this but much smaller may be a nice way to hold the pin without letting the chuck damage it.
Not to mention I could make pins that are hollowed on one side or even carved through.... *Eyes light up with the possibilities*
Nevir202 Thank you, These are great little jigs, and you can customize them for your needs.
That's an awesome solution to the spoon jig. I'm not going to point out how the clamp should be the other way or the tail should be taped or how "unsafe" your band saw handling is, because ... well, I don't think you're stupid nor reckless. I know I've learned most of what I know about turning from you, and this is a case there the student has not surpassed the master. ;) Thanks for the video!
Oh Thomas, everything is an accident waiting to happen. You just need to pay attention and minimize your risk. I put a big rubber band around the clamp before I used it.
Take care, Carl
I let the dogs play with it....lol "Cracking jig" I'll check into that.
Carl Great Video. Be careful of that metal band. You should tape it down with some duct tape before turning- just a suggestion before you get hurt.
Thank you Ted, I put a big rubber band around it when I use it.
Carl check out Ron Brown's solution to this problem. He removes two chuck jaws and then wraps something around the remaining jaws to protect the project and add grip.
How big was the block you started with?
I'm not sure this was a long time ago.
Ola Sr Carl sou do Brasil e sou fa de seus trabalhos tambem trabalho com torneados mas nao chego nem a seus pes um abraço e uma boa noite
Carl ... Watch that hose clamp ... if you turn it around, there is less chance of getting nailed by it. Don't ask me how I know.
One thing you may want to do is cover up the tail end of the band clamp and the screw mec. with duct tape or something.
Yep. If so was my idea to made one, I was going to do the paddle with the router
What wood did you use to make the jig?
Thanks! I'll try this! You might consider turning the clamp over... so the tongue is facing away from your hands
Thanks! I did when I turned the lathe on :)
Make sure the clamp flap is trailing when you do this! also you might want to tape it down with some duct tape as extra precaution against possible catching on tools and body parts. Just a safety suggestion.
I did turn it around and tape it before I used it, but yes safety first!
Um die Klemmwirkung zu erhöhen, würde ich den Schlauchbinder so weit wie möglich vorne anbringen. Sonst jedoch eine Super Idee.
you should make a scoop chuck, a youtuber has a video on it
Hey Carl could you do a video about face plate turning on your other channel?
*whistles* What lathe is that? That thing is spinning really true!
It's a Delta 46-460
If you flip the clamp it might be a bit safer as it rotates during turning.
Thanks for the tip Shane!
A couple of questions. What is that machine called? Where can I get one? How much? What are the tools called that carve the wood and where can I get them?
Hi Matt, It's a Delta 46-460 Lathe. I would shop online for the best deal. This one was around $600 Mostly gouges and chisels. You can get a starter set at your local woodworking store, or again online.
Thanks so much :)
Do you drink whiskey? Your voice is awesome!
what is the diameter of the spoons you make and what is the diameter of this jig ?
thanks Lee
This spoon is about 1 1/4" and the jig is about 3"
Honestly, don't get why you get hammered about safety, anybody every saw Sam Maloof work a bandsaw ?? We all know to be careful. Thanks for sharing Carl, your vids are really inspiring !
Be careful with the hose clamp, it would cut your hands .Take care
from what started out as a nice looking jig ,what the hell did you do to it carl ? kick it about the shop lol lol lol ,being serious now better to make another one could turn out to be a cracking jig ,mean you could use the same jig for making differant sized spoons,cant wait for the next one,,,, dougie....