Thanks for a great tutorial spaskis. Im still learning though, you wouldnt happen to know what I am doing wrong when the t1-9_ is not appearing in the GMT folder? perhaps i missplaced some of textures? Might it be different on other maps?
I'm also having problems with a black screen. I'm doing exactly what u said in the tutorial, it loads the track for a millisecond sometimes but then it just goes black
Thanks you very much for this video. Where do we get the Brianza files from? I dont have those those try other textures but end up with a yellow/green road. Many thanks again.
install the track you want to use the textures. go to installed\locations and open the folder of the track until you see the mas files. Unpack those mas files into another folder. open the scn file with 3dsimed.
OK so when I open the .scn from the original track it works OK in 3dSimED3 but when I follow the instructions here, it doesn't work. There is something missing from this tutorial!
Hola Spaskis, sigo los pasos, pero a la hora de entrar en el DevMode no veo el circuito. Es un circuito de GTR2 pero al ser base Gmotor2 no creo que haya problema.
Hola spaskis, soy novato en el tema de creando circuitos, entonces te pongo en situación yo estoy haciendo un circuito siguiendo tus indicaciones de este video pero no se si lo que tu has hecho en el video me servirá para hacer mi circuito, que opinas al respecto? Sigo las indicaciones de tu video o me dices tu algunas indicaciones?
Vaya ostiones que le arreas a la tecla Intro colega, haces como yo, te aseguras bien para que el ordenador lo entienda ... Ahora en serio, muchas gracias por el Tuto. Estas cosas son las que hacen progresar a las comunidades mogollón. Estoy deseando ver el Tuto de RealRoad. ¿Cuando esperas tenerlo ?
Great video but i get stuck when loading the track into dev mode, i can see a warning in the logs but no matter what i do to fix it i cant get the thing to load, any help would be awesome, heres the error line:- WARNING: Unable to find track-specific gdb file for: H:\SteamLibrary\steamapps\common Factor 2\ModDev\Locations\MeanwoodGT24\Assets\GMT\_output.scn
Hola, gracias por el tuto, pero vas muy rapido para mi. Tienes esto en algun documento escrito? Me gustaria imprimirlo y seguir las instrucciones lentamente... Gracias!!
You remove everyhing except for the road elements created. You only need to leave what you see when the new output_T.scn is open. For the one that sees a black screen. Sorry but with this info i cannot help
I got an error when trying to create the VBS folder but the folder is created anyway. than when I import the scn file the track does not appear. can anybody help me?
In order to ask questions regarding this tutorial, please post in the dedicated thread at official rF2 site. It is more likely to get help there. I will not care about future comments here. forum.studio-397.com/index.php?threads/tutorial-to-convert-tracks-from-rfactor-to-rfactor2-with-3dsimed.34867/
Hi. I'm at the final stage of packaging the component, I am trying to add the four MAS files in the gMotor utility tool when i name the component, select location, then try to add the MAS to the package they do not appear. If i add them and click package, the rfcmp is only 1kb.
I solved the problem. The MAS files must be created using the MAS2.exe found in rFactor2 support/tools. If you use the MAS.exe to create them the component packer tool will not load them.
Hey spaskis, i was trying to get in contact with you in the ISI forum, but it said you were banned... But im having a few problems getting the same amount of detail on the track when I have realroad. Maybe something you could look at? :)
I tried this guide but when I try to load into the track in DevMode is just gives me a error loading scn file in the crashlog :(. Any Idea what could cause that?
+spaskis1976 vidman.cpp 2428: CUBE error loading scene file F:\Steam Games\steamapps\common Factor 2\ModDev\Locations\ESSINGTON_LONG\ESSINGTON_LONG\ESSINGTON_LONG.SCN: Error initializing scene file F:\Steam Games\steamapps\common Factor 2\ModDev\Locations\ESSINGTON_LONG\ESSINGTON_LONG\ESSINGTON_LONG.SCN .. I think thats the main error :/ I used a standard rf1 track to try it out.
+Virtual Racing Entertainment It is difficult to judge without being able to look at your project. Are you using a standard scn file from rf2? i always paste the gmt instances into a standard empty scn file. I would not use the default output.scn from 3dsimed. Beware also about the name of the layout to be correctly set. I would also suggest to try to pack it into a rfcmp. It is actually less demanding than devmode where the paths need to be correctly setup.
+spaskis1976 I could upload you the SCN file and the output file if you want. Maybe you find something. Would really appreciate the help and thanks for the fast reply btw :)
+spaskis1976 I did exactly as you did before loading the track in dev mode, but when I load in dev mode the game crashes, can you help me? I'm using ISI Skip Barber as car.
Ok, i am creating tracks with Bob TRack Builder, and exporting to Game stock car extreme, and just changing some line to automobilista. But Texture and Shader is really bad, do you know how can i make better using 3dsimed?
spaskis1976 it is in that location. but in your script you say 'script should be in the 'rFactor 2\Data\ModDev\Locations' folder. I have no Data folder. but mine works unlike my friends.
cuando hoce el video fue porque es mas facil seguir los pasos. Explicar por escrito un tutorial de 20 minutios llevaria muchisimo tiempo y seria mas dificil de seguir. el video lo puedes parar a tu gusto. si alguna cosa en concreto no la entiendes dine el minuto exacto y trataré de explicartelo@falcon0580
There is something missing because it doesnt work for you? No way you are doing something wrong? And for sure you would like to receive some help with such an exhaustive explanation of your problems. Find a better tutorial then!
He disfrutado mucho viendo tu tutorial, que crack!
It would be fantastic if we could get a similar tutorial and tolls for converting cars too.
Really Great Tutorial, I wish to thank you for taking the time to make this and share Kudos
Good news for all simracers ...Thx for help...
When I open the track in 3dsimed, I just get a grey screen with the 4 coloured axis. I've tried a couple of tracks and get the same thing with both.
the scn is within the layout folder of the track. Use the windows search engine otherwise if you still cant find it!
Is Fernando Alonso speeching? Lol... thanks for the video.
It works perfectly. Thank you spaskis!
Thanks for a great tutorial spaskis. Im still learning though, you wouldnt happen to know what I am doing wrong when the t1-9_ is not appearing in the GMT folder? perhaps i missplaced some of textures? Might it be different on other maps?
The game crashes when I will open the track in the developer mode :/
Thanks for your comments guys!
I'm also having problems with a black screen. I'm doing exactly what u said in the tutorial, it loads the track for a millisecond sometimes but then it just goes black
And how convert tracks from rF2 to rF?
You found out?
@@OficialRazor Yes but one of my guys is having trouble loading some textures.
@@F1SimulatorManiac Ok!
I managed to convert some textures, but not completely. Now
i'm dedicating myself to convert from GPL to rFactor
@@OficialRazor I need paul ricard from Assetto corsa to rfactor.
An how convert from rfactor2 to rfactor1?
Thanks you very much for this video. Where do we get the Brianza files from? I dont have those those try other textures but end up with a yellow/green road.
Many thanks again.
install the track you want to use the textures. go to installed\locations and open the folder of the track until you see the mas files. Unpack those mas files into another folder. open the scn file with 3dsimed.
+spaskis1976 Thanks a million, Im getting there all be it very slowly lol.
nice tutorial! is it possible to do it the other way around, so rf2 to rf1? or even rf2 to ams? thanks
Tom Geico you can export to rF1 from 3dsimed as well but you need to convert rF2 exclusive shaders for grass and road to standard rF1 shaders
Thanks. Is there any tutorial? I dont know about the exlusive shaders.
Wouldn't be faster to use "Replace all", replacing all "Joesville" with "MyTrack", for example?
ｄｅｋｏｔｏｒａ 7 7
Do you think I made a 20 minute video of something that could be done replacing? Go for it....
@9:10 Use the new 3dsimed (3.1g) texmap paste function, since the maps are the same for all asphalts on your track.
OK so when I open the .scn from the original track it works OK in 3dSimED3 but when I follow the instructions here, it doesn't work. There is something missing from this tutorial!
Hola Spaskis, sigo los pasos, pero a la hora de entrar en el DevMode no veo el circuito. Es un circuito de GTR2 pero al ser base Gmotor2 no creo que haya problema.
Hola spaskis, soy novato en el tema de creando circuitos, entonces te pongo en situación yo estoy haciendo un circuito siguiendo tus indicaciones de este video pero no se si lo que tu has hecho en el video me servirá para hacer mi circuito, que opinas al respecto? Sigo las indicaciones de tu video o me dices tu algunas indicaciones?
Followed this to the letter but the track materials are missing when I check in 3dsimed. The entire track surface is purple? Please help.
No replies in here. Read the description.
Vaya ostiones que le arreas a la tecla Intro colega, haces como yo, te aseguras bien para que el ordenador lo entienda ...
Ahora en serio, muchas gracias por el Tuto. Estas cosas son las que hacen progresar a las comunidades mogollón. Estoy deseando ver el Tuto de RealRoad. ¿Cuando esperas tenerlo ?
When I open the converttracknew.vbs i get error this script is not in the right place
Hi, do you know how to convert an RTB track to Rfactor2 or automobilista? I have only been able to use it in Assetto Corsa so far.
Great video but i get stuck when loading the track into dev mode, i can see a warning in the logs but no matter what i do to fix it i cant get the thing to load, any help would be awesome, heres the error line:- WARNING: Unable to find track-specific gdb file for: H:\SteamLibrary\steamapps\common
Factor 2\ModDev\Locations\MeanwoodGT24\Assets\GMT\_output.scn
Hola, gracias por el tuto, pero vas muy rapido para mi. Tienes esto en algun documento escrito? Me gustaria imprimirlo y seguir las instrucciones lentamente... Gracias!!
You remove everyhing except for the road elements created. You only need to leave what you see when the new output_T.scn is open.
For the one that sees a black screen. Sorry but with this info i cannot help
en el tutorial se implementa el real road al circuito@pablereitor
I got an error when trying to create the VBS folder but the folder is created anyway. than when I import the scn file the track does not appear. can anybody help me?
In order to ask questions regarding this tutorial, please post in the dedicated thread at official rF2 site. It is more likely to get help there. I will not care about future comments here.
forum.studio-397.com/index.php?threads/tutorial-to-convert-tracks-from-rfactor-to-rfactor2-with-3dsimed.34867/
I don't know what is the wet builder
si hablo español desde los dos años :-)
Thankyou
Nice tutorial . Do you know how to convert fbx from Rtb to rfactor 2? If you do would be nice if you do a video tutorial. It would be a hit.
Oddonis can you post in the studio397 forum? I only answer questions there. You have the link in the description
May anyone can convert all Tracks from F1 WCP 2015 Trackpack into rFactor 2? Would be nice?
P.S and how is converting Cars working?
You need to decompress the .mas files into the same folder were scn is.
Hi. I'm at the final stage of packaging the component, I am trying to add the four MAS files in the gMotor utility tool when i name the component, select location, then try to add the MAS to the package they do not appear. If i add them and click package, the rfcmp is only 1kb.
I solved the problem. The MAS files must be created using the MAS2.exe found in rFactor2 support/tools. If you use the MAS.exe to create them the component packer tool will not load them.
Hey spaskis,
i was trying to get in contact with you in the ISI forum, but it said you were banned...
But im having a few problems getting the same amount of detail on the track when I have realroad.
Maybe something you could look at? :)
Sorry, I don't understand what you mean with "detail"
no uso apenas el facebook. pregunta por privado lo que quieras
El enlace de descarga no funciona.
does this still work? I tried it with the Lienz track (inner city variant) but i got an crash to desktop. what is the problem?
Im wanting to try this. Let me know if you find out any info on this program at todays date.
@@Jackman781 I also get CTD saying that its missing an INI in the log file.
my 3dsimed not have rFactor2 export button...
You need to buy 3dsimedv3. You have a trial period for it. You are using free version 2
spaskis1976 tks!!
How do i copy on SimEd
I tried this guide but when I try to load into the track in DevMode is just gives me a error loading scn file in the crashlog :(. Any Idea what could cause that?
what is the error?
+spaskis1976 vidman.cpp 2428: CUBE error loading scene file F:\Steam Games\steamapps\common
Factor 2\ModDev\Locations\ESSINGTON_LONG\ESSINGTON_LONG\ESSINGTON_LONG.SCN: Error initializing scene file F:\Steam Games\steamapps\common
Factor 2\ModDev\Locations\ESSINGTON_LONG\ESSINGTON_LONG\ESSINGTON_LONG.SCN .. I think thats the main error :/ I used a standard rf1 track to try it out.
+Virtual Racing Entertainment It is difficult to judge without being able to look at your project. Are you using a standard scn file from rf2? i always paste the gmt instances into a standard empty scn file. I would not use the default output.scn from 3dsimed. Beware also about the name of the layout to be correctly set.
I would also suggest to try to pack it into a rfcmp. It is actually less demanding than devmode where the paths need to be correctly setup.
+spaskis1976 I copied the code from the output file (Like your video) and pasted that in the bottom of the SCN file.
+spaskis1976 I could upload you the SCN file and the output file if you want. Maybe you find something. Would really appreciate the help and thanks for the fast reply btw :)
+spaskis1976 I did exactly as you did before loading the track in dev mode, but when I load in dev mode the game crashes, can you help me? I'm using ISI Skip Barber as car.
ｄｅｋｏｔｏｒａ 7 7
could we use TS?
or even better rF2 discord chat
Which server?
ｄｅｋｏｔｏｒａ 7 7
discord.gg/zBa4z
I'm in the voice channel.
this works for automobilista? conversion and realroad?
No that I know
Ok, i am creating tracks with Bob TRack Builder, and exporting to Game stock car extreme, and just changing some line to automobilista. But Texture and Shader is really bad, do you know how can i make better using 3dsimed?
i cant get the vbs file to work it keeps saying its not i the right DIR. whats going on?
drdoomslab I have a friend getting that error too. I think that the data location is messing it up.
***** you need to put the vbs in the locations folder of devmode subfolder
spaskis1976
it is in that location. but in your script you say 'script should be in the 'rFactor 2\Data\ModDev\Locations' folder. I have no Data folder. but mine works unlike my friends.
We figured out the problem... He did not have the Joesville track in locations folder.
At 6:55 i dont get what i am suppose to remove, you just say "this" ^^ great video otherwise but i have stoppped right there ^^
Do you know how to convert tracks from Rbr to rFactor?
Oddonis . I have never done it. I understand it should be similar.
fixed link
Hi Downloadlink is down. Could you reupload it?
Dome Alonso
www.dropbox.com/s/q7fsqj1d6p48p22/ConvertTrack.vbs?dl=0
spaskis1976 thank you
Me encantaría saber cómo convertir un mod. Saludos!!!!
cuando hoce el video fue porque es mas facil seguir los pasos. Explicar por escrito un tutorial de 20 minutios llevaria muchisimo tiempo y seria mas dificil de seguir. el video lo puedes parar a tu gusto. si alguna cosa en concreto no la entiendes dine el minuto exacto y trataré de explicartelo@falcon0580
There is something missing because it doesnt work for you?
No way you are doing something wrong? And for sure you would like to receive some help with such an exhaustive explanation of your problems. Find a better tutorial then!
Hablas Espanol.
te escribi por facebook si me podrias contestar por esa via.