Perfect Bungee Tube here: amzn.to/2f1QZbu 10x cheep Stainless Snap Links for the Float line on Amazon: amzn.to/2f2UVbK You will find more amazing Spearfishing Content on my German/English Blog: www.harpune.info Searching for Spearfishing Spots/ Tutorials? You will find my amazing Spearfishing Spot Maps on: www.harpune.info/spearfishing-maps-guide/ Follow me on Facebook: facebook.com/German.Spearfishing.Channel.2018/ Become a Patreon: www.patreon.com/GermanSpearfishingChannel Greetings Chris
magnet on the needle was a great idea i dint know how to do it so i just used the clear tube, inserted silicon, and then cable tied it in place still going strong after 5 years, its quite stretchy
This is great thank you, the magnet and needle didn’t quite work for me so I used a vacuum cleaner one end of the tube and fed the pull thread with a small knot into the other end, the suction from the vacuum pulled it through really easy even coiled up and on my own 🙂👍
I did build one. An it worked out perfectly. Although I do recommend using a vacuum to make things quicker.. Thanks for the build guide. Awesome videos too.
Schönes Video. 👍 Es kann eine dickere und stärkere Schnur mit stärkeren Schlaufen und einem Karabiner verwendet werden. Dann können Sie auch Thunfisch fischen..
Great video mate! I am doing my floatline based on this video. Can you send me a link pls where you got those clip swivels from? ( is it a fishing swivel as I couldn`t find similar in any dive shops) Thanks,Levente
I don't use the line through the middle. Just stick silicone in both ends make 2 and cable tie. Pulling the black rubber over the cable tie. Don't use fishing swivels! Use carabiners from a boat shop stainless steel.
@@jbikedh hey, thanks for the tip. Can you send me a picture of this solution as I cannot imagine how this would look like. ( luika18@gmail.com ). Thanks, Levente
Just wondering, in general do floatlines never get tangled/stuck on your fins, for example when duck diving? Does the line never get close to the fins? if so how does it not
Thank you, guy. This is definitely the cheapest way to make a floating line. But there a lot of things you should do in order to make it better and more reliable. 1. Fishing line is better than thread to get through the tube. 2. Ends should be made from stainless steel with more strong pieces. I have already made a couple of them and have been using them for the last five years.
Thanks! Just leave a comment if you have any more questions! I still use mine and no water is inside the inner tube and it works perfect :)! Greetings Chris
![แฉกลโกงงานวัด 2024 [ โกงมั้ยครับ ep.106 ] | DOM](http://i.ytimg.com/vi/taC5dpP3HXA/mqdefault.jpg)
Perfect Bungee Tube here:
amzn.to/2f1QZbu
10x cheep Stainless Snap Links for the Float line on Amazon:
amzn.to/2f2UVbK
You will find more amazing Spearfishing Content on my German/English Blog: www.harpune.info
Searching for Spearfishing Spots/ Tutorials? You will find my amazing Spearfishing Spot Maps on: www.harpune.info/spearfishing-maps-guide/
Follow me on Facebook: facebook.com/German.Spearfishing.Channel.2018/
Become a Patreon: www.patreon.com/GermanSpearfishingChannel
Greetings Chris
This was really helpful👍 thank you 🙏 from Japan 🇯🇵
Do you do spearfishing in Japan? I was thinking about to go to japan next year....
magnet on the needle was a great idea
i dint know how to do it so i just used the clear tube, inserted silicon, and then cable tied it in place
still going strong after 5 years, its quite stretchy
In Case of it breaks the line will held the rest :D
This is great thank you, the magnet and needle didn’t quite work for me so I used a vacuum cleaner one end of the tube and fed the pull thread with a small knot into the other end, the suction from the vacuum pulled it through really easy even coiled up and on my own 🙂👍
awesome video , im about to head to the store and buy the necessary parts for making this.
Did you rebuild? Greetings
I did build one. An it worked out perfectly. Although I do recommend using a vacuum to make things quicker.. Thanks for the build guide. Awesome videos too.
1:34 That is a great implementation of that knot!
It formed itself haha, didn't thought much about XD
Schönes Video. 👍 Es kann eine dickere und stärkere Schnur mit stärkeren Schlaufen und einem Karabiner verwendet werden. Dann können Sie auch Thunfisch fischen..
Ich habe ein Video für eine noch stärkere Leine! Guck in meinen Videos :)
@@germanspearfishingchannel5359 Danke schön! 😃👍
Thanks for the video mate i made one today turned out mint 👌
Thanks! Give me some feedback if it is floating correctly! Have a look on my other Tutorials and videos :)
Yea mate it was great
It done exactly what its ment to do 👌
@@blaydenbrown7446 You are from Aus?
@@germanspearfishingchannel5359 yea sure am
Nice video! Thanks for doing it in English.
No Problem, have a look on my other Videos 😉
Wanted to make a new float line. Went to bauhaus.. 100eu for 20m 4mm tube. 😮 Danm ! Things are getting expensive.
Amazon works, otherwise Toom or Obi
@@germanspearfishingchannel5359
I bought one at a commercial fishing store. A float line they use for fishing nets.
20eu for 47m.
Thanks for the video.
How's it going?
Any leaking? Any changes you'd make?
Works perfect, no leaking at all! Greetings
great post
would you make the lists of the required item to make the float line?
thank you
thank you
Another awesome video mate, another project for me to do, thank you for sharing, happy spear fishing from Australia. 👍
Let me hear how good it turned out! Greetings out to one of my favorite lands in the world!
Great video mate! I am doing my floatline based on this video. Can you send me a link pls where you got those clip swivels from? ( is it a fishing swivel as I couldn`t find similar in any dive shops) Thanks,Levente
I don't use the line through the middle. Just stick silicone in both ends make 2 and cable tie. Pulling the black rubber over the cable tie. Don't use fishing swivels! Use carabiners from a boat shop stainless steel.
@@jbikedh hey, thanks for the tip. Can you send me a picture of this solution as I cannot imagine how this would look like. ( luika18@gmail.com ). Thanks, Levente
Exactly
heat shrink would make it lots neater wont need clove hitches then.
I was running out of it ;D
Wat would be better to use 3mm tubing or 5mm tubing as I can't get 4mm were I live thanks
3mm is a Little Bit tight, i would use 5mm instead, its just harder to seal it up, but it will work definitily!
Just wondering, in general do floatlines never get tangled/stuck on your fins, for example when duck diving?
Does the line never get close to the fins? if so how does it not
Rarely, the tube is stiff, you don’t tangle that easy!
Thank you, guy. This is definitely the cheapest way to make a floating line. But there a lot of things you should do in order to make it better and more reliable. 1. Fishing line is better than thread to get through the tube. 2. Ends should be made from stainless steel with more strong pieces. I have already made a couple of them and have been using them for the last five years.
Thank you for the Tipps, the ends in my newer ones are stainless!
thank your for your videos 😍 i wanna ask you about spearfishing flasher
I Never Used one of them, but Feel free to ask!
great video nd a great idea but at the end i think using a shark clip is better i guess .
They make a lot of noise!
Nice video, thank you for posting regards Simon
No Problem! Have a look on my other Tutorials 😬
What kind of rope do you used to insert in the tube? Polypropylene, nylone, other?
+Maksim Zykov Polypropylene, nothing serious, of you want more strength use dyneema :)
Greetings Chris (www.harpune.info)
sehr cool könntest du mir so eine machen mit Aufroll-Halterung wie in deinem anderen Video ? gerne zahle ich vorab mit pay Pal :-)
Ich hab dir ja geschrieben, selber bauen ist die Devise!
muito bom parabéns
English? Greetings!
Pretty cool man I'm gonna make one !!
Thanks! Just leave a comment if you have any more questions! I still use mine and no water is inside the inner tube and it works perfect :)! Greetings Chris
Super IDee. Werde ich gleich nachmachen.
Freut mich! Guck dir noch meine anderen Tutorials an... beste Grüße, bei jeglichen fragen schreib einfach
Ich habe eine harpune gebaut und würde dir gerne ein bild zeigen 🔨🔫
Ch. W. Ok 😱😱😱😱😱😱😀😀
Ch. W. www.bilder-upload.eu/show.php?file=c30103-1479146783.jpg
Ch. W. [URL=www.bilder-upload.eu/show.php?file=4c685b-1479147246.jpg][IMG]www.bilder-upload.eu/thumb/4c685b-1479147246.jpg[/IMG][/URL]
Ch. W. www.bilder-upload.eu/show.php?file=19939e-1479147755.jpg
Ch. W. www.bilder-upload.eu/show.php?file=b967a3-1479148009.jpg
Du machst echt coole Videos.
Ich konnte schon viel lernen.
Schaut mal auf meinem kanal vorbei...
+Ch. W. (GermanSpearfishingChannel) ja mach ich... Petri weiter hin
Dank dir!