no, doesn't seem to have problems w/ liquids on the top. we do have some marks from the kids using paint and markers on the table, which seem to not wipe off that easily... at least not without some stronger cleaners.
Hey clueless dad, I'm very embarressed to ask but the holes seem so small that I dont get them completely (just half) in with the screwdriver. Can you give me a hint?
Worse case you can try grabbing the screw head with pliers while keeping it straight with a screwdriver pressing down and turning it with the pliers. Or better yet get a replacement screw that is the same size and length but has a hex head that you can use a wrench to turn when it gets tough.
Hello. Thanks for the video. If I put a clamp to mount a monitor that weighs around 15 pounds on the middle of a 47 inch Lagkapten, do you think it will leave a dent? I also will have a support beam in the middle. Thanks
the weight of the monitors should be no problem, the mount for the arm(s) may be an issue. If its a clamping mount that's wide enough it should be OK. (even better if each monitor clamps separately).
I regret buying this without paying for assembly service. I don't have a electric screw so I had to screw it myself. That hurt my hand so much and I can't screw it to the end. The desk became very unstable therefore I used gorilla glue to make less shaky. Now i'm considering to buy TROTTEN.
Thank you. I can't understate enough how important it is having folks like you who make short and concise videos.
Also, I subscribed!
Thank you for this!
Currently in a market for a office table and came on this one.
$79 right now for this table and legs.
lmao, in Poland its like 45$
@@BonesV15different currency
32.50$ in philippines
$79 too in Singapore
Thank you dad
Hi. Thank you for the video. Does it get damaged upon contact with liquids?
no, doesn't seem to have problems w/ liquids on the top.
we do have some marks from the kids using paint and markers on the table, which seem to not wipe off that easily... at least not without some stronger cleaners.
is it durable enough to clamp my monitor mount with my laptop?
Is there a way to get the adjustable legs back into if you took them out cos I can’t.
Hey clueless dad, I'm very embarressed to ask but the holes seem so small that I dont get them completely (just half) in with the screwdriver. Can you give me a hint?
@@arts930 elbow grease! You can need to be careful not to strip the screw heads so you should push downward.
Worse case you can try grabbing the screw head with pliers while keeping it straight with a screwdriver pressing down and turning it with the pliers.
Or better yet get a replacement screw that is the same size and length but has a hex head that you can use a wrench to turn when it gets tough.
Hello. Thanks for the video. If I put a clamp to mount a monitor that weighs around 15 pounds on the middle of a 47 inch Lagkapten, do you think it will leave a dent? I also will have a support beam in the middle. Thanks
thank you!
is lagkapten more solid than the Linnmons? mine is bent right now...
it has the same Adils legs, right? should be pretty similar table top (just a different size / color?) how did it get bent?
@@CluelessDad diff color and texture, monitors too heave for it. 27" and 30 ultrawide on top of that poor table xD
@@ivegyattocomment put two extra legs in the middle to prevent bend if your stuff is too heavy
which one is bent? Linnmon?
£25 in the uk 🇬🇧
Planning to buy this table for gaming do you recommend it? does it worth the price and How many kilos does that table supports?❤
Yeah its very basic but strong enough, I think it can take 50kg+ no problem. I've currently got two monitors + my laptop on it.
what the other 8 holes are for?
probably for other leg options.
Hi ! great video. I was planning to buy this. Is it strong enough to hold the monitor arms ?
I have a 31 inch monitor.
31 inch will fit I think. double check the measurements before you buy though!
@@CluelessDad Thanks
I am concerned if it would be able to take the load of the monitor arm and the monitor . Any comments ?
did u buy the this table? is it durable enough? im planning to buy it to clamp a monitor with my laptop
Is it strong enough to hold 2 monitors 24 inches with arms?
the weight of the monitors should be no problem, the mount for the arm(s) may be an issue. If its a clamping mount that's wide enough it should be OK. (even better if each monitor clamps separately).
It isn’t wobbly especially when you write? Since it’s a cheap table
Its not bad. I've used it as my main desk table for the past two years. not wobbly.
whats the name of the screwdriver used
does it wobble?
no, not at all. pretty steady.
@@CluelessDad thanks man, now i can buy without worries
@@CluelessDadhat if my table is wobble?
Would it be strong enough to have a TV on it?
Yes. A plasma. No problem.
I have 2 monitors and a computer on it, it is strong enough to hold
@@BonesV15 yeah, should be fine if they'll all fit.
I regret buying this without paying for assembly service. I don't have a electric screw so I had to screw it myself. That hurt my hand so much and I can't screw it to the end. The desk became very unstable therefore I used gorilla glue to make less shaky. Now i'm considering to buy TROTTEN.
or buy a new one and pay for service.
yeah, or you can get a racketing driver, that's easier than a regular screw driver but not as expensive as a power driver.
@@CluelessDad thank you, I will consider getting it.
Sir can I put another Adils leg in the middle so it wont sag?
there are not screw holes in the middle; it is a honeycomb that can't really accept fasteners.
how do i buy it from japan to get it cheaper?
its not worth it, since you'd have to pay so much for shipping. (Apparently its cheaper in eastern europe too)
I ordered this and I got only 2 legs
check with Ikea, they have a pretty good return policy... (and policy for missing parts)
@@CluelessDad Thank you for reply. I realized that i had ordered the table with alex unit of drawer and thats why it was missing 2 legs.