oooohhh I've seen some of those kits and I've done that for different stick models in the past. Let me investigate into it and see if we can't come up with an easier way of doing those. Sometimes they require an extra board as the Hori doesn't natively support RGB inputs, but that might be a fun mod to make another video about once we figure out the easy ones!
@zanstaedtler it's a pretty chopped up one! Hahaha. Sanwa JLX with an octo gate, a 2lb linear spring, a 16.2mm actuator, a phreakmods quick release shaft for traveling days! And a funny clear bat top by... I'm not sure who lol. Hope this helps! If you'd like a video of me showing you what's in it I'm happy to make one about it.
dude can i buy any lever then replace the hori deafult lever or theres any spesific requirement for the lever? like if i want to buy golden lever i just buy and change the deafult one
Hello! that's a bit difficult. In terms of fitment, so long as the collar is a lower kind the mounting points on the alpha mounts. HOWEVER I'm not super sure the height of the golden lever's body. For my alpha, I've found that levers that are taller than a JLF or the Crown CWL-309-MJ-NEW-Helpme-KMS-ST30 seems to rub at the bottom a bit. Even the LS-32 that I've seen folks install into theirs, or a bunch of the bullet lever/variants rubs for me at the bottom. I would double check the full height of the body + the bottom parts of the actuator to see what fits. I can make a video talking about what I've found fitting or not if you'd like!
Very helpful, thanks!
You're most welcome! Thank you for checking this out!
How do I submit my art work?
Thanks! Do you have any info on putting led/rgb lights on this model? I wanted to attempt that but im scared of soldering and messing up pieces
oooohhh I've seen some of those kits and I've done that for different stick models in the past. Let me investigate into it and see if we can't come up with an easier way of doing those. Sometimes they require an extra board as the Hori doesn't natively support RGB inputs, but that might be a fun mod to make another video about once we figure out the easy ones!
@@CommanderGrabber that would be really awesome!
I like the lever! What's the model?
@zanstaedtler it's a pretty chopped up one! Hahaha. Sanwa JLX with an octo gate, a 2lb linear spring, a 16.2mm actuator, a phreakmods quick release shaft for traveling days! And a funny clear bat top by... I'm not sure who lol. Hope this helps! If you'd like a video of me showing you what's in it I'm happy to make one about it.
dude can i buy any lever then replace the hori deafult lever or theres any spesific requirement for the lever? like if i want to buy golden lever i just buy and change the deafult one
Hello! that's a bit difficult. In terms of fitment, so long as the collar is a lower kind the mounting points on the alpha mounts. HOWEVER I'm not super sure the height of the golden lever's body. For my alpha, I've found that levers that are taller than a JLF or the Crown CWL-309-MJ-NEW-Helpme-KMS-ST30 seems to rub at the bottom a bit. Even the LS-32 that I've seen folks install into theirs, or a bunch of the bullet lever/variants rubs for me at the bottom. I would double check the full height of the body + the bottom parts of the actuator to see what fits. I can make a video talking about what I've found fitting or not if you'd like!
@CommanderGrabber can you make a video about that? thanks bro
@@deeims Can do - ty for being patient. Will work on it as our next video :)