thank you, I followed your instructions and fixed my printer. In my model the small tabs that you need to open for the roller to be removed where white.
Currently I am having problems with lines (streaks) that appear in the printed pages. I tried the cleaning functions of the menu but with no luck. Any ideas on how to get rid of them?
@@cghera may b it's from tonner and 2 it's in ur fuser film . So try a self test page from printer . If same borrow catridge from someone and try test page. I hope it will fix ur issue . Fuser film is little expensive .
@@cghera On other laser printers, I've often seen this result from toner dust on the mirror in the imaging unit. Not sure how hard the imaging mirror is to get at on these printers, but if the lines are stable, then change if the printer is severely tilted, that's the likely cause.
Thank you 🙏. Fixed the problem of paper jams. I found it easiest to push forward & then remove the thin clip holding the rubber. It's very thin & I broke it but fixed with superglue & baking soda. Thank you
These instructions are brilliant, many thanks indeed. You saved me time and money. I nearly bought a new printer because I was so frustrated with the frequent paper jams. I had no idea there was such a simple and easy fix until I came across your video. Now my old and trusty MF8080cw works like new and I might be using it for another 10 years! Thanks again!!!
It is a clear instruction to show how to fix the paper jam problem by just simply replacing the roller. Actually I was frustrated with the frequent paper jam for my Canon printer. Thank you so much for this valuable video.
Thank you Very helpful I got this printer from my friend and initially I thought i should buy a brand new year Then I came across your video with details explanations and clear video shots Now the paper jam after first page was gone!
Thanks to the description, I was able to clear the paper jams on my MF8330. Only the unlocking is slightly different with this printer. Thank you very much, you saved my day. I didn't expect the solution to be that simple. It was the first time that I had a printer repair fun.
This is by far the the most useful DIY video I have seen. I was just about to take my Canon Mf8350cdn to an electronic recycling center. Paper was jamming every other page. The fact that I could fix this issue without buying any new parts is simply amazing. This video was extremely clear and had the exact information I needed. Can't thank you enough, MiraeNurin!
Superb how-to video, thank you so much! This fixed the issue in my Canon ImageClass MF8380Cdw as well. It too was frequently giving me the error "incorrect size/setting drawer 1" after printing the first page of a multi-page document. Note to others attempting this repair: the roller will only lock into place one way, but can be inserted two ways. If it is not latching or going into place, try turning it around 180° while holding it to insert it back into the printer (that is, around the axis you move it along as you insert it back into the printer).
Hi @@Broder1ck - On my system I pressed the menu button, then 2, then 8, then the menu button. Nothing will show on the screen and you won't hear any beeps as you do this, but the menu will change to the service menu. This seems pretty standard for the MF8300 line of printers, so it should work for you. Good luck!
Brilliant! I have been so frustrated with my printer for 1 year now, printing 1 page at a time as it just started jamming after 1 page. was about to replace the printer but thought I'd research online how to fix it. This totally worked and was a really well made educational video to show me how. Thank you so much.
Thanks a lot! On my LBP-7680Cx printer the service mode entry is different (Power off, ONLINE+Cancel Job buttons held while powering on, then Menu button will present service menu with rather understandable menu entries). But the feeder roller is the same, and your tips on where to press and where to pull were very helpful, and the trick with the roller reuse is just great.
I was about to trash my iSensys MF8330CDN because of the paper size errors occuring every second pages. This instruction helped to resolve the issue and I have a fully functional printer again.
Thank you so much. I fixed my MF8380 cn printer. If I can do it. I had to use some needle nose pliers to pry the tabs apart, but it worked. You saved me lots of frustration and from buying a new printer. Have a great day!
Thanks for this clear video! I am so happy I found this finally. It solved the paper issue of my MF8330Cdn printer. And it was such an easy job, taking only a couple of minutes.
같은 기종을 2011년부터 써왔습니다. 그리고 오늘 덕분에 새생명을 얻었어요. 대리점에서는 부속이 없어서 못 고친다고 한 것을 한 푼도 안들이고 고쳤습니다. 프린터에게 생명의 은인과 다름 없습니다. 정말 큰 도움이 되었습니다. 감사합니다. (고무의 위치를 바꿔서 증상이 사라지지 않는다면 고무의 표면을 깨끗이 청소해보시길 권합니다.)
So much thank you!! 대박입니다. 주의해야 할 부분 강조해주셔서 조심스럽게 꺼내서 3분만에 해결했어요. 너무 감사해요. 꺼낸 다음에 다시 낄려니까 방향이 있어서 잠시 고민했는데, 롤러 끼워야 할 부분 자세히보고 모양 맞춰서 끼웠는데 잘 맞았습니다. 어제밤에 belt dressing 이란 약품을 주문해 놨었는데 앞으로 7-8년은 롤러 고장날 일 없을것 같고, 드럼이나 다른부분이 더 먼저 고장 날것 같군요 ^^;;
Until recently I had problems with my Canon MF6550 jamming every few prints, then it became every other print, and now it jams every time I try to print. I'm so frustrated I want to throw my printer out the window. I will try your method to see if it works or if my printer gets added to the local landfill.
Does anyone know how to enter service mode on MF624CW? Can I remove the roller without entering service mode? Enter, 2, 8, enter doesn't work on this model.
Google Search for "mf8080 roller" (change for your model if necessary but this search comes up with results and the part looks the same for a large series of printers). It's only 5-10 dollars. There are a few stockists in UK and US. Maybe more... Depends where you are of course.
Thank you so much, fixed a problem that I had been trying to resolve for weeks. I don@t support you know how to solve a similar problem with the manual feed tray?
thank you, I followed your instructions and fixed my printer. In my model the small tabs that you need to open for the roller to be removed where white.
Currently I am having problems with lines (streaks) that appear in the printed pages. I tried the cleaning functions of the menu but with no luck. Any ideas on how to get rid of them?
@@cghera may b it's from tonner and 2 it's in ur fuser film . So try a self test page from printer . If same borrow catridge from someone and try test page. I hope it will fix ur issue . Fuser film is little expensive .
@@cghera On other laser printers, I've often seen this result from toner dust on the mirror in the imaging unit. Not sure how hard the imaging mirror is to get at on these printers, but if the lines are stable, then change if the printer is severely tilted, that's the likely cause.
Same for me just fixed my mf8580 so grateful for this video
Thank you 🙏. Fixed the problem of paper jams. I found it easiest to push forward & then remove the thin clip holding the rubber.
It's very thin & I broke it but fixed with superglue & baking soda.
Thank you
These instructions are brilliant, many thanks indeed. You saved me time and money. I nearly bought a new printer because I was so frustrated with the frequent paper jams. I had no idea there was such a simple and easy fix until I came across your video. Now my old and trusty MF8080cw works like new and I might be using it for another 10 years! Thanks again!!!
Thank you! You saved my eight year old printer from the garbage! I am so happy I was able to fix it with your help.
It is a clear instruction to show how to fix the paper jam problem by just simply replacing the roller. Actually I was frustrated with the frequent paper jam for my Canon printer. Thank you so much for this valuable video.
Thank you
Very helpful
I got this printer from my friend and initially I thought i should buy a brand new year
Then I came across your video with details explanations and clear video shots
Now the paper jam after first page was gone!
Hello from the future! This video literally just saved me about $400! I can't thank you enough!
Thanks to the description,
I was able to clear the paper jams on my MF8330. Only the unlocking is slightly different with this printer.
Thank you very much, you saved my day. I didn't expect the solution to be that simple. It was the first time that I had a printer repair fun.
Worked on my Canon Mf8380cdw. The button sequence was a little different but virtually the same. This printer has been a great one.
2:40 I love so much how you explaining what to touch. I laughed so loud that I farted!
And also Happy International Mens Day! Wish you all the best!
Awesome. Instructions were very simple and clear. I too practiced it 5 times. Printer works fine. Thank you.
This is by far the the most useful DIY video I have seen. I was just about to take my Canon Mf8350cdn to an electronic recycling center. Paper was jamming every other page. The fact that I could fix this issue without buying any new parts is simply amazing. This video was extremely clear and had the exact information I needed. Can't thank you enough, MiraeNurin!
Thank you for giving me this beautiful letter!!!!!! I finally understood why I had to make this video... Thank you again!!!!!!!!!!
Superb how-to video, thank you so much! This fixed the issue in my Canon ImageClass MF8380Cdw as well. It too was frequently giving me the error "incorrect size/setting drawer 1" after printing the first page of a multi-page document.
Note to others attempting this repair: the roller will only lock into place one way, but can be inserted two ways. If it is not latching or going into place, try turning it around 180° while holding it to insert it back into the printer (that is, around the axis you move it along as you insert it back into the printer).
Hi Robert. I have an iSensys MF8350Cdn and I hope this works for my printer as well. What is the code you have used to enter the service mode?
Hi @@Broder1ck - On my system I pressed the menu button, then 2, then 8, then the menu button. Nothing will show on the screen and you won't hear any beeps as you do this, but the menu will change to the service menu. This seems pretty standard for the MF8300 line of printers, so it should work for you. Good luck!
@@robertrossi5116 Thank you very much Robert, I will try it!
YES! This is EXACTLY what was wrong with my printer. I was so frustrated, printing one page at a time - I almost trashed it. A thousand thank-yous!
Brilliant! I have been so frustrated with my printer for 1 year now, printing 1 page at a time as it just started jamming after 1 page. was about to replace the printer but thought I'd research online how to fix it. This totally worked and was a really well made educational video to show me how. Thank you so much.
Thanks a lot! On my LBP-7680Cx printer the service mode entry is different (Power off, ONLINE+Cancel Job buttons held while powering on, then Menu button will present service menu with rather understandable menu entries). But the feeder roller is the same, and your tips on where to press and where to pull were very helpful, and the trick with the roller reuse is just great.
Thank you so much! This worked with a 8350CDN model. I got it for $2 from an auction and this method fixed it.
You are a Hero! You just prevented me from trowing my printer out the window!
덕분에 자가수리해서 프린트 잘됩니다.
너무너무 감사합니다.
그동안 용지걸림때문에 억지로 참고 쓰다가 새로살까 수리 밑길까 고민하다가 믿고 따라하니 너무 잘됩니다!
최고십니다!!!
행복한 2022년 되세요.
정말
I never post comments but this video was excellent. Solved my problem. Luckily I didn't break anything. Thank you so much
I was about to trash my iSensys MF8330CDN because of the paper size errors occuring every second pages. This instruction helped to resolve the issue and I have a fully functional printer again.
Thank you so much. I fixed my MF8380 cn printer. If I can do it. I had to use some needle nose pliers to pry the tabs apart, but it worked. You saved me lots of frustration and from buying a new printer. Have a great day!
I also had a "incorrect size/setting drawer 1" problem on my MF8380Cdw and this fixed it. Thank you so much for taking the time to make this video.
thank you for giving me a kind message!!!!!!
Thank you. Thank you. Thank you. That feeder roller is very hard to get out. I used someone to help me and I got it out and back in.
thanks again.
Thanks for this clear video! I am so happy I found this finally. It solved the paper issue of my MF8330Cdn printer. And it was such an easy job, taking only a couple of minutes.
같은 기종을 2011년부터 써왔습니다. 그리고 오늘 덕분에 새생명을 얻었어요.
대리점에서는 부속이 없어서 못 고친다고 한 것을 한 푼도 안들이고 고쳤습니다.
프린터에게 생명의 은인과 다름 없습니다. 정말 큰 도움이 되었습니다. 감사합니다.
(고무의 위치를 바꿔서 증상이 사라지지 않는다면 고무의 표면을 깨끗이 청소해보시길 권합니다.)
Thank you! Your Instruction was worth watching. Without you I would have thrown my Printer into the trash.
Like everyone else, you have my gratitude! EXCELLENT VIDEO!
Thank you so much! Struggled with my MF8080 before coming across this video, you are a lifesaver!
Excellent job that worked perfectly it works on a 8050 as well.
Thank you thank you thank you. Very clear video and your instructions have fixed the problem on my MF8080 that has been driving me CRAZY!
Thanks very much. An excellent way to extend the life expectancy of a printer, at a very low cost.
MF8240cw도 이 방법으로 매 페이지마다 용지 걸림 발생하는 문제 해결했습니다, 감사합니다!!
참고로 제가 쓰는 기종은 서비스 메뉴 조작 후 전원을 끄지 않으면 잠시후 롤러가 원위치 되어서 해당 단계 이후에 전원을 끄고 작업해야 했습니다.
Brilliant instructions. Many many thanks. Printer works perfect now.
wow, very clearly teaching video!! the best one!!!
You solved my issue with canon mf8380cdw…. Thanks!
Thanks for the tip! It really worked. I was about buy another printer but this fixed it!
Thank you for the video. I followed your instructions and fixed my printer ! Help me save some $ as I am about to engage Canon service team !
Thanks for the great video! One tip - use bent needle-nose pliers, it's much easier.
Thank you, this was perfect! My tabs were white as well.
I’m really happy, your video help me to fix the problem. Thank you so much!
Thank You, the printer works perfectly now!
Thank you for the tip. I had a same problem, followed your video, and fixed the problem!
소중한 영상 잘봤습니다. 중간에 "잡곡취사가 시작되었습니다." 빵 ~ 터졌습니다.^^
Thank you. Very Clear instructions.
B blessed 🙏 bro being from same filed and truly u explained in the most best possible.
Thanks for this, extremely helpful.
This is a very good part replacement video
Thank you for your help
THANK YOU VERY MUCH . GREETINGS FROM TURKEY
thank you so much. very good.
Thank you Kim, really important video for me!
So much thank you!! 대박입니다. 주의해야 할 부분 강조해주셔서 조심스럽게 꺼내서 3분만에 해결했어요. 너무 감사해요. 꺼낸 다음에 다시 낄려니까 방향이 있어서 잠시 고민했는데, 롤러 끼워야 할 부분 자세히보고 모양 맞춰서 끼웠는데 잘 맞았습니다. 어제밤에 belt dressing 이란 약품을 주문해 놨었는데 앞으로 7-8년은 롤러 고장날 일 없을것 같고, 드럼이나 다른부분이 더 먼저 고장 날것 같군요 ^^;;
AsSalaam!
Thanks from Belgium! Excellent video.
감사. separate roller (맞닿은 작은거)도 교체 알려 주세요.
Thank You Sir! Repaired my printer and works perfectly!
Great guide.
Thank you
이 훌륭한 안내서에 감사드립니다. 좋은 수업. 독일에서 안부. 다닐로
Danke, dass du mir ein freundliches Wort gegeben hast !!!!!
Until recently I had problems with my Canon MF6550 jamming every few prints, then it became every other print, and now it jams every time I try to print.
I'm so frustrated I want to throw my printer out the window. I will try your method to see if it works or if my printer gets added to the local landfill.
Thank you so much, you saved me. good luck with everything.
Does anyone know how to enter service mode on MF624CW? Can I remove the roller without entering service mode? Enter, 2, 8, enter doesn't work on this model.
Very good
와 일년동안 속썩이던 복합기를 이 비디오 보고 고칩니다.
안쓰던 부위를 뒤집어서 사용하는 신박함에 ㅂㄹ을 탁 쳤습니다.
하시는 모든일 형통하시길 바랍니다
- 알리에서 롤러고무를 주문하기 직전에 이 비디오를 보고... mf8040cn 사용자가 -
thank you very very very mutch
Amazing Koreans as always!! Thanks 🙏
Thank you so very much, it worked perfektly!!!!!!!!!!!!!!!!!!!!!!!!
Great!
It works like a charm.
Where could I find the rubber band to buy for a future replacement?
Thank you a lot
this video is very helpful
Perfect video, but WHAT IF THE FEEDER ROLLER DOESN'T MOVE FORWARD AFTER YOU PRESSED FD-R-CHG???
Found it out myself: make sure the RED LIGHT isn't blinking...
Thank you very much~!
l fixed my printer~Thank you!
Thank you so much. How the heck did you learn this complicated trick? Amazing. 고맙습니다!
Great Video, THANKS!
Thank you, you saved me ❤
Thank you guys
excellent video
Thanks. Very helpful
Thank you!!!!! Have a nice and healthy day!!!!!!!!
where can i find this exact part online, need to replace it.
Google Search for "mf8080 roller" (change for your model if necessary but this search comes up with results and the part looks the same for a large series of printers). It's only 5-10 dollars. There are a few stockists in UK and US. Maybe more... Depends where you are of course.
Thank you very much . i am happy now .
Thank you very very much it's fixed
Well done
It was great
thank you
Thank you👍
Thank you so much, fixed a problem that I had been trying to resolve for weeks. I don@t support you know how to solve a similar problem with the manual feed tray?
If anyone can solve a manual feed tray problem, please help us! Then I can link to that video!!!!!!
Fantastic!
Thank you so much!
Thank you for giving me a nice day!!!!!!!!!!
메뉴 누르고 28누르고 그 뒤에 다해서 fd -r chg 까지 눌렀는데 안 돌아가요 롤러가 ㅠㅠ 왜그로죠
기계적인 문제일까요??? 그 문제를 꼭 해결해 주셔야 합니다!!!!!! 전 세계 사용자들이 아마 곧 다 그 고장이 날 가능성이 있습니다!!!!!!!
감사합니다~ 덕분에 공짜로 쉽게 고쳤습니다~ 다시한번 감사합니다~
Je suis très reconnaissant envers vous
Je vous remercie infiniment
Thank you
Thank you verry verry mutch
Cool hack!
Thank you!
awesome!!!!
good..
thank you