Thank you for yours vidéo. I am doing thé same to give a second life to thé engins. I learned from you some New trics. Can you please tell le what product you use for thé ultrasonic cleaner please?
Hi. Thanks. Cleaning liquid is a frustrating topic. I have tried everything but I have found that floor cleaners for tiles work the best and I am always experimenting. The trick is to keep the temperature down and the temperature at which the aluminum turns black differs from product to product. I add ice or cold water but at the end of the day you are still going to use some elbow grease. 🧪🧽
Thank you for yours replay. I concure....floor cleaning me also and give attention before turning black . Not trop anyonic produits dedans. Best regards and vivement for New vidéos. Amitiés.....I really apreciated thé New trics learned from you. Greatings
Hi. The lapping can be difficult. If you have the bronze inserts you are ok and the damage, if any can be repaired. If it is just the aluminum-plated surface then you can only lightly clean the surface and no damage can be repaired. I experimented with different compounds and I settled on a burnishing compound they use for polishing painted surfaces. I mix in some cutting oil used by machinists. I use some fuel tubing pressed over the end of the valve to spin it between my fingers and if you pull too hard you pull it off the valve.
@@rcaeroenginerepair One more question if I may. Is it ok to put the valves into the US cleaner? I am not sure if you include them with the rest of the parts
Hi. I don't always show everything for the videos will be too long. Yes I put the valves in the cleaner but I put them in a small open plastic container so they can not vibrate against anything else. I do the same with the piston. 👍
Well done!
Hi, can you please tell me what fluid you use in your ultrasonic cleaner. Thanks
Great channel btw
Hi. Thanks. Please read my reply to Horja. He had the same question. 👍
Thank you for yours vidéo. I am doing thé same to give a second life to thé engins. I learned from you some New trics. Can you please tell le what product you use for thé ultrasonic cleaner please?
Hi. Thanks. Cleaning liquid is a frustrating topic. I have tried everything but I have found that floor cleaners for tiles work the best and I am always experimenting. The trick is to keep the temperature down and the temperature at which the aluminum turns black differs from product to product. I add ice or cold water but at the end of the day you are still going to use some elbow grease. 🧪🧽
Thank you for yours replay. I concure....floor cleaning me also and give attention before turning black . Not trop anyonic produits dedans. Best regards and vivement for New vidéos. Amitiés.....I really apreciated thé New trics learned from you. Greatings
Thanks👍
Great video, thank you! How exactly do you do the valve lapping? It wasn't very clear for me in the video. Could you please share details? Thank you!
Hi. The lapping can be difficult. If you have the bronze inserts you are ok and the damage, if any can be repaired. If it is just the aluminum-plated surface then you can only lightly clean the surface and no damage can be repaired. I experimented with different compounds and I settled on a burnishing compound they use for polishing painted surfaces. I mix in some cutting oil used by machinists.
I use some fuel tubing pressed over the end of the valve to spin it between my fingers and if you pull too hard you pull it off the valve.
@@rcaeroenginerepair Thank you very much for your reply! It's very enjoyable to see you work.The music is great too!
@@rcaeroenginerepair One more question if I may. Is it ok to put the valves into the US cleaner? I am not sure if you include them with the rest of the parts
Hi. I don't always show everything for the videos will be too long.
Yes I put the valves in the cleaner but I put them in a small open plastic container so they can not vibrate against anything else. I do the same with the piston. 👍