I have the exact same wheels and color on my 21 WRX best investment I’ve ever done. I’m currently using project kicks Iconig R40’s but I’m definitely liking these lugs more. They are sleeker and cleaner looking for sure.
Those are tough wheels because of the widebody spec. The center part is basically a wheel spacer integrated into it from what I can tell. Might try tall lug nuts.
Can use run FN2’s as a open lug nut?? Reason I ask is because I ordered them for my gramlights but Im going to have to run spacers in the front of my gr86 to avoid rubbing therefore I need longer wheel studs for the front and these won’t fit on longer studs unless I can run them with no cap
You can contact them in the bottom right of the website to see if they are in stock. Mine took like three months because black caps were out of stock at that time.
They ship it out soon after receiving the item from the company. Right now they're probably slammed with orders because the yen exchange rate is so good
The monolith is very high quality steel and finish. I use them only in summer conditions, and they are like new after 3 years. I could imagine every nut out there having problem with rust in salty conditions, unless you use Stainless steel lug nuts, ... That I never encountered in all my life.
Blackhawk Japan is 100% legit. They’re a lot cheaper because they’re shipping direct from Japan. $1 USD is like 140 ¥ right now. The yen is really weak so parts direct from Japan are crazy cheap right now.
@Kodawari.FK8 thanks for the reply. I got some knock off ones on amazon for the time being like 50$ been a year and the key hole are stripped and rusting so I'm wanting new authentic ones to last for my re30
Hey bro, I’m trying to buy the rays from your link but I put down my information and it says it’s not working and another thing is I don’t have the same rims you got, but I have from the same brand you have were they fit? I have a FK8.
One more thing, bro can you help me get a good price on center caps for my rays ze 40 please cause by how much money you save me on the Lugnuts. It looks like you’re the plug.
![VARIS x HURTLING Widebody DC2 Type-R Build [Part 5]](http://i.ytimg.com/vi/7WZwJQfOF-w/mqdefault.jpg)
I have the exact same wheels and color on my 21 WRX best investment I’ve ever done. I’m currently using project kicks Iconig R40’s but I’m definitely liking these lugs more. They are sleeker and cleaner looking for sure.
Great comparison video!
Those are tough wheels because of the widebody spec. The center part is basically a wheel spacer integrated into it from what I can tell. Might try tall lug nuts.
Nice review I waiting on the monoliths for my TE37s just cause I like the design better also have the fn-2 on order as well lmao
Says they're discontinued ? Issues with them ? The rays
They're not discontinued. Love them. Just got another set for the dc2 build
Your rims TE37 Ultra M spec? Would you go with 53-53mm length?
have you ever seen the hex caps sold separately? Not sure how the blue will look and would like to be able to get some black caps if they suck
Never seen them sold separately for the rays lugs. As far as I know you can only order them as a complete set with the lugs.
Can use run FN2’s as a open lug nut?? Reason I ask is because I ordered them for my gramlights but Im going to have to run spacers in the front of my gr86 to avoid rubbing therefore I need longer wheel studs for the front and these won’t fit on longer studs unless I can run them with no cap
They can as long as the stud doesn't stick out so far that you can't get the hex bit in to loosen/tighten the lug
Will they fit a 2022 Dodge Charger , I recently got my wheels stolen and I’m looking for a good wheel lock . Any suggestions ?
Your car takes lugs in size M14x1.5 so you can look up any lugs or wheel locks in that size
Do the rays come with wheel lock or the unique design serve as a wheel lock ?
It comes with a lug key to loosen/tighten from the inside of the lug, but every FN-II key is the same 😂
@@Kodawari.FK8 thanks went ahead and ordered a set from that website you recommended as well
How long do shipping normally takes? I got to check out but it doesn’t say how long shipping will take.
You can contact them in the bottom right of the website to see if they are in stock. Mine took like three months because black caps were out of stock at that time.
Does the monolith twist too to avoid scratching the paint?
No they don't
@@Kodawari.FK8 oof. Are they more prone to scratching the inner wheel holes?
How long do black hawk usually shipped there product
They ship it out soon after receiving the item from the company. Right now they're probably slammed with orders because the yen exchange rate is so good
@@Kodawari.FK8 whats the spin? they are $195 on black hawk while retails $300 in US?
I was considering getting the monoliths, do they
hold up good to weathering? Do they rust from the weather or anything?
You'll get rust without the plastic caps, but even with the caps they aren't completely sealed so you'll still get some rust
The monolith is very high quality steel and finish.
I use them only in summer conditions, and they are like new after 3 years.
I could imagine every nut out there having problem with rust in salty conditions, unless you use Stainless steel lug nuts, ... That I never encountered in all my life.
what’s normally wait time in black hawk japan ?
If you DM them on the website they'll reply with lead times. Usually 3 months
What is the torque spec you use on the rays lug nuts on your type r?
94 ft lb
@@Kodawari.FK8thanks!
The link for the lugs are they authentic rays? They seem pretty cheap compared to the stores u just wanna make sure I get real ones
Blackhawk Japan is 100% legit. They’re a lot cheaper because they’re shipping direct from Japan. $1 USD is like 140 ¥ right now. The yen is really weak so parts direct from Japan are crazy cheap right now.
@Kodawari.FK8 thanks for the reply. I got some knock off ones on amazon for the time being like 50$ been a year and the key hole are stripped and rusting so I'm wanting new authentic ones to last for my re30
If you plan to sell your monoliths, lmk!!
Oh they're long gone! Lol
Hey bro, I’m trying to buy the rays from your link but I put down my information and it says it’s not working and another thing is I don’t have the same rims you got, but I have from the same brand you have were they fit? I have a FK8.
Just use any of my links and search rays formula nut m14x1.5. That’s the thread size of fk8 studs.
@@Kodawari.FK8 thank you for your help. My bad for the spelling.
One more thing, bro can you help me get a good price on center caps for my rays ze 40 please cause by how much money you save me on the Lugnuts. It looks like you’re the plug.
@Afoothatsfire I had to replace a center cap and bought through @bulletproof_james on Instagram. He works for bulletproof automotive
RAYS FN II FTW!!!! 💪 Bought 4 Sets for 4 Sets of TE37SLs!!!! 💪