The flat shafter is starting to work well for you. You can get an auto blip for them I think for down shafting. I would just love a run in that yoke she is some thing to go. Thanks for bringing us along for the spin Matt.
I have a mechanical down blipper I made for this that works on, dose need a little more RPM on the blip I think so I shall adjust that before I use it again
Thanks buddy I’m glad you enjoyed it. Shame there was so much traffic for me, if I had a empty track it would of been nice to see how quick I could lap
I leave the camara case in the car so I know it’s in a good spot. I was thinking about moving it back a little so you could see more of the driving position but this way you can see the wheel shifter and feet so not much more needed
Just wondering if you could show us the camera mounting arrangement and the camera settings. I have been mucking around with a gopro 10 in my mini but not yet happy with the results. Still loving your vids.
Glad you liking the videos mate. This is a GoPro 4 from wired GoPro remotes Astro as that gave it me as they setbth for best results in car. I am ordering a 5 of them as well. I have heard most ppl aren’t happy with the 9 and 10 that’s why I stick with the 4 and getting a 5 so I can have the telemetry on the screen
Beautiful work, excellent driving. What is even the point of that gear indicator if 3rd and neutral are both 0, and sometimes it decides not to display 6th? At 9:52 it just randomly counted from 4 to 6 on its own as you were going through the turn😂
Yer it used to work perfectly, the sensor that picks up the gear position on the shift drum is failing, it’s common on the busa engine so gives wrongs readings
Hey bud it lasted the day without any adjustments. I took the car straight to my mates place to store it so haven’t had a chance to have a good look at it but I do need to just to see how it lasted. I might book another track day to run it again see how it last
@@skidmores.garage If its anything like mine it lasts far far longer than the drag chain. Did you find you needed to set a different delay time for the shifter for 3 - 4th changes? I have a shifter working on a PC5 it works great on all gears except that one. I'm now sorting out a speed feed to the PV5 so it know what gear it is in so I can set longer delay for that change.
That looked very exciting. Hope my car is half as exhilarating as that when it's done. Thanks for the in-car footage.
It dose bring a smile to your face being so easy to drive it’s nice
The flat shafter is starting to work well for you. You can get an auto blip for them I think for down shafting. I would just love a run in that yoke she is some thing to go. Thanks for bringing us along for the spin Matt.
I have a mechanical down blipper I made for this that works on, dose need a little more RPM on the blip I think so I shall adjust that before I use it again
Great update and incredible sounding motor.
Watched this on a 65" oled, it's unreal footage. Well done 👌
Thanks buddy I’m glad you enjoyed it. Shame there was so much traffic for me, if I had a empty track it would of been nice to see how quick I could lap
She’s a beast Matt. Really enjoyed watching that, thank you. 👌
Glad you like it mate 👍🏻
Impressive little motor 👍
She ain’t to bad for a old girl. Ideally she could do with a refresh
Great updates Matt, I hope you get it sorted bud.🙂
Be nice to see how quick yours is round there bud
Not only do you build a proper race car , your a very good race car driver.
You forgot good looking as well haha
And humble
@@matthoward923 😝😂🤪
Good position for the camera, so many people just show the rear view mirror.
I leave the camara case in the car so I know it’s in a good spot. I was thinking about moving it back a little so you could see more of the driving position but this way you can see the wheel shifter and feet so not much more needed
Flippin Heck, that thing flies!
She ain’t to bad could do with some more power ideally
you always end up wanting a bit more power - I do anyway!
@@neilbedford5082 yer about more is always on the cards it’s just so expensive to get more power these days
Just wondering if you could show us the camera mounting arrangement and the camera settings. I have been mucking around with a gopro 10 in my mini but not yet happy with the results. Still loving your vids.
Glad you liking the videos mate. This is a GoPro 4 from wired GoPro remotes Astro as that gave it me as they setbth for best results in car. I am ordering a 5 of them as well. I have heard most ppl aren’t happy with the 9 and 10 that’s why I stick with the 4 and getting a 5 so I can have the telemetry on the screen
Beautiful work, excellent driving. What is even the point of that gear indicator if 3rd and neutral are both 0, and sometimes it decides not to display 6th? At 9:52 it just randomly counted from 4 to 6 on its own as you were going through the turn😂
Yer it used to work perfectly, the sensor that picks up the gear position on the shift drum is failing, it’s common on the busa engine so gives wrongs readings
Brilliant
Thanks buddy
Sounds interesting project some footage be good and could expand your youtube viewing profile into the lucrative bmw forums 👍
there is a lot of money in the bmw racing
Looks really fast! Are you running the stock gearbox or is it reenforced?
It’s a compleat APE gearbox set and shafts buddy with a slightly closer ratio as I don’t need 160mph lol
@@skidmores.garage I cant imagine 160 in such a short wheelbase...
@@squirrelsworkshop nether can I lol. The car is very stable and would probably get there and be fine but let’s not test that lol
I am sure you will get it sorted. Then it will show its true colours .
Yer mate I will sort all the little bits and bobs I want and then she should be sweet.
If your car was having all those issues and it went like s^%t off a shovel then when it is sorted there will be no stopping you.
When I get it just right it should be spot on without the little bits that annoy me lol
Warn Slicks. Never heard of 'em
Me neither when they are already purple from over heating as I’m putting them on the car that’s fine lol
@@skidmores.garage 🤣🤣🤣 R/woooosh
The adjustment wasn’t the problem with the first issue: you didn’t shift hard enough and got a false neutral. Your fault, not the technology.
Yer I agree mate, the false neutrals are me for sure
The adjustments I was making was to the cut timing start and duration as it wasn’t letting go of the gear correctly
How did the new chain stand up to testing?
Hey bud it lasted the day without any adjustments. I took the car straight to my mates place to store it so haven’t had a chance to have a good look at it but I do need to just to see how it lasted. I might book another track day to run it again see how it last
@@skidmores.garage If its anything like mine it lasts far far longer than the drag chain.
Did you find you needed to set a different delay time for the shifter for 3 - 4th changes? I have a shifter working on a PC5 it works great on all gears except that one. I'm now sorting out a speed feed to the PV5 so it know what gear it is in so I can set longer delay for that change.
@@Lost13mm it dose play up on the 5-6 shift, it dose need a little more playing with I just ran out of time