How To Apply Epifanes Mono Urethane Paint | A Hard Wearing Single Part Paint

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 10

  • @captainhaddock1217
    @captainhaddock1217 6 หลายเดือนก่อน +1

    Hi Dan, great video and looks like a good single part option - you don't tip off the rolled applications? Just let it flow out? Thanks!

    • @DanLeeBoatbuilding
      @DanLeeBoatbuilding  6 หลายเดือนก่อน

      I rarely tip off these days. I just apply with a roller, minimal working of the surface and then allow it to flow out 👍

    • @markgallagher1376
      @markgallagher1376 6 หลายเดือนก่อน

      When I rolled Total Boat Wet Edge paint on my boat, which is also a 1 part boat paint, I got better results by doing a light “tipping” pass with the roller than tipping it with a brush. This paint seems to behave the same way.

    • @captainhaddock1217
      @captainhaddock1217 6 หลายเดือนก่อน +1

      @@DanLeeBoatbuilding cheers!

  • @sarasarah8653
    @sarasarah8653 2 หลายเดือนก่อน

    I see that you are not wearing a mask while spraying /painting. Is it safe?
    Can I use this paint on porous surface like bisque clay? Thank you

    • @DanLeeBoatbuilding
      @DanLeeBoatbuilding  2 หลายเดือนก่อน

      I always wear a mask when spraying, when applying by brush or roller in well ventilated areas it is not so essential particularly with single part paints.
      I don't have any experience with painting bisque clay. I would think it will be ok though even if porous if first sealed with an appropriate primer such as the epoxy or multi marine primers. I have videos on the application of these products as well.

    • @sarasarah8653
      @sarasarah8653 หลายเดือนก่อน

      ​@@DanLeeBoatbuildingThank you

  • @SeekCarp
    @SeekCarp 3 หลายเดือนก่อน

    can you recommend a mat black paint for aluminium boats?

  • @HDXBear
    @HDXBear 6 หลายเดือนก่อน

    Will this paint be compatible on a fibre glass hull over an epoxy primer