i had the same nuts loosening, almost after every flight. ordered a pack of M2 stainless steel nuts to replace all the crappy plastic ones. haven't had a problem yet.
@@fpvgivy I put the stainless nuts on and it fixed all the problems with the drone I actually was able to send it so hard I cracked the frame I have a new frame on the way
Between the nuts loosening up and my camera wobbling it was hard to get good at flying the drone when every flight was just weird finally got to start pushing it pushed it a little to far but nothing a new frame can’t fix
Nice to have the 2nd Camera drone sound in the Video! But i would not show the 2nd Camera Picture all the time when you are flying, it is nice to have the Dji03 Video alone when flying. After Landing would be nice to have some Google View to see the FlyTime and Batt stats. Just some ideas.
Thanks for the ideas will keep in mind. As far as I know filming the goggle view is a goggles 2 thing I have the v2 I have been trying to figure that out.
The first time that i use turtle mode i just burnt one of the ESCs, and.... i will never use it again. The other thing that i did with my pavo20(2nd) was replace the 2 blade props for 4 blade props "GEMFAN D51 2020 2 inch prop" the sound is almost stealth, or the stealthiest that you can go.... and I also use the gnb 720mah stick batteries, with this config i can get at least 5 to 5,5 min of easy flying, with a really low prop noise.
I just bought tiny lens75 , this is my 3rd drone after, DJI fpv and axisflying manta 3.6 ripper ( yesterday I flew 195km/h) good fun but too many restrictions. I'm beginner/ semi advance still need to practice a lot . Nice video - chill and relaxing. We all learning...thx for content
I have tryed that it works for a little longer than not doing it I ordered stainless steel nuts for it someone in the comments said it worked for them.
I have the same bolts and nuts loosing up on my Pavo 20 last time I wast out flying as beginner crashing. I definitely need to setup turtle mode. I have the tango 2 controller.
I have to say, I agree with you with this pavo always becoming loose when just randomly flying throughout my neighborhood, I have found That THE DARKSTAR20 performs better than the P20, even though it's a 2s. But that is my Opinion., Thank for the content, It keeps me going
I know what they are for the design of them is just bad and thread locker dosent hold the nut but it helps keep the quad from loosening up every flight
Muito louco seus voos parabéns
Very good! Thanks! Make more videos! Please!
More vids on the way stay tuned!!!
i had the same nuts loosening, almost after every flight.
ordered a pack of M2 stainless steel nuts to replace all the crappy plastic ones. haven't had a problem yet.
Do you have a link to those? Thanks!
I just ordered I pack of m2 nuts that’s for the tip
That's the same exact thing I did off instinct!
@@fpvgivy I put the stainless nuts on and it fixed all the problems with the drone I actually was able to send it so hard I cracked the frame I have a new frame on the way
Between the nuts loosening up and my camera wobbling it was hard to get good at flying the drone when every flight was just weird finally got to start pushing it pushed it a little to far but nothing a new frame can’t fix
Nice to have the 2nd Camera drone sound in the Video! But i would not show the 2nd Camera Picture all the time when you are flying, it is nice to have the Dji03 Video alone when flying. After Landing would be nice to have some Google View to see the FlyTime and Batt stats. Just some ideas.
Thanks for the ideas will keep in mind. As far as I know filming the goggle view is a goggles 2 thing I have the v2 I have been trying to figure that out.
The first time that i use turtle mode i just burnt one of the ESCs, and.... i will never use it again. The other thing that i did with my pavo20(2nd) was replace the 2 blade props for 4 blade props "GEMFAN D51 2020 2 inch prop" the sound is almost stealth, or the stealthiest that you can go.... and I also use the gnb 720mah stick batteries, with this config i can get at least 5 to 5,5 min of easy flying, with a really low prop noise.
I get 5 minutes of cinematic flying out of my tattu 450mah with stock props, I want to try the 4 blade so it's not so loud
I just bought tiny lens75 , this is my 3rd drone after, DJI fpv and axisflying manta 3.6 ripper ( yesterday I flew 195km/h) good fun but too many restrictions. I'm beginner/ semi advance still need to practice a lot . Nice video - chill and relaxing. We all learning...thx for content
Loctite on your threads may/might help with loosening, worth a try if you haven't already.
I have tryed that it works for a little longer than not doing it I ordered stainless steel nuts for it someone in the comments said it worked for them.
I have the same bolts and nuts loosing up on my Pavo 20 last time I wast out flying as beginner crashing. I definitely need to setup turtle mode. I have the tango 2 controller.
It should be the setting up turtle mode just set it to one of your buttons
how did you get rid of the prop guard in frame?
Just tilt the camera up and if I recall I was filming in wide on the o3 not in the max view
Nice flying. You're improving. What memory card do you use/recommend? Thanks!
a.co/d/f6C9sPq this is the sd card i have been using in the drone. Thanks so much for watching.
all 4 nuts on my pavo loosen up on my pavo 20 after every flight, i think i might loctite it. BTW I receive the stand holder thanks it works great.
Glad to hear you like the stand I ended up switching the nuts on the Pavo to some m2 stainless steel nuts and it fixed all my problems
@@954Film I’m going to try that. I’m tired of disassembling just to tighten those four nuts.
I have to say, I agree with you with this pavo always becoming loose when just randomly flying throughout my neighborhood, I have found That THE DARKSTAR20 performs better than the P20, even though it's a 2s. But that is my Opinion., Thank for the content, It keeps me going
Hell yea thanks for watching man more content on the way!
Which props (2 prop vs 3 props vs 4 props) are the quietest for the Pavo 20? Thanks!
I have heard that 3 and 4 blades are the quietest but I haven’t tested anything outher than the ones it comes with
Hello, I'm Andres from Chile... my question is if you have any video on how to configure the turkey 20 to turn the LED strip on or off, greetings
BetaFPV Pavo 20 Unboxing + Full Setup And Test!
th-cam.com/video/HyixzMMEaY4/w-d-xo.html this vid should help you out!
@@954Film Thank you very much friend, I will be following your channel from Chile, success!
+1
Dude are u serious? thread locker on a nylon nut wtf 😂 & the stupid grommets are for vibration dampening champ
I know what they are for the design of them is just bad and thread locker dosent hold the nut but it helps keep the quad from loosening up every flight
Muito louco seus voos parabéns