I had the same issue with the no binding and I had just re-calibrated the transmitter. Thanks to your video I was able rebind the transmitter to the quad.
You are terrific! I've had this drone for a week & I was going crazy to get it going. Your video is a life saver. I was ready to trash the drone. The Instructions in the Manual are not specific. Thanks.
You are my hero, MAN, I called Banggood every name in the book because I went through hell trying to get this quad running, I was convinced it was defective.. Thank God for your video... I am sooooo relieved... Thanks again buddy...
Thank you so much 63straycat!!! I got this as a gift and thought it was faulty, but your video fixed the problem. 5 minutes later...........flying, and one broken prop (my fault, not the drone) Woohoo! Thanks again.
THANK YOU, THANK YOU, THANK YOU!! I would never have figured this out without your help. I have also added your video link to the numerous posts that all complain about exactly what you have just fixed for me. Thanks for going to the trouble to resolve this.
Thanks so much 63 - I was frustrated and swearing as well but this did the trick. I wish they would get a good translator over there. I wonder how their customer service is.
Thanks for sharing info that isn't in the user manual, and I have liked and saved this video for future reference if it ever happens to mine, and I've done some mods to mine since I've had it a couple weeks, and great quad and a lot of fun to fly
Sorry that I have not gotten back to you . I have been in touch with the Hubsan repair center in California,and have just receive e-mail stating that there was a problem with one of the components on the board ,not specific of which one as I sent both the Quad and the Transmitter to them for inspection. They have tested and will be returning it to me .Thanks for your concern wish I could tell you which part but I was not told. Thanks Again
Thank You . I can tell you the people that I dealt with in China and the States (California) for Hubsan could not have been more helpful and gracious and understanding . Hubsan should be proud to have employees like SHALLY and KEVIN that are trying to do the right thing for the customer. Very happy at this point and awaiting delivery on the 14 th.
I have it and think its a great little Quad for the price. I have heard that there is a firmware upgrade, that will cancel the compass calibration every time you change lipo's, but its not on the Hubsan site. Also there is nothing about calibrating the giro's, at the beginning of the video you mention how too calibrate te Giro, putting the left stick in left down corner a wiggel right stick, but this activates compass calibration and not the Giro's Nice review, thanks fore sharing
Straycat , Maybe you could help me in another area . As I have mention I have a H502s that I'm building with parts that I had order earlier.Not all the parts are listed in the manual for purchase. What I 'm looking for is the two antennas that are in the frame of the quad. One is attach to the receiver board by ulf\ipx connector and the other to the camera module in the same way .My question is would you have any idea where to find these and or would you know the specs on them as far as length and maybe away to make them. Sorry there is alot there but I have been searching but can not find anything concerning the build on these antennas .Thanks
try something like this 2.4G Receiver Antenna Omnidirectional IPEX Port Compatible Futaba JR WFLY. www.banggood.com/3DBI-Brass-2_4G-Receiver-Antenna-Omnidirectional-IPEX-Port-Compatible-Futaba-JR-WFLY-p-1032401.html?rmmds=search from Bangood but most suppliers should have something like it.
Thank you for reply ,but what is so great about quadcopter community is that someone reads a inquiry about a problem and almost instantly someone will reply or direct you to right area . Again I appreciate your help.
hey i got this but i also bought the 502s controller transmitter ill be able to rebind it to the 502s transmitter right? i saw some one else do this and they were able to use it like the 502s so pretty much no difference between them besides the transmitter right?
How do I get the h502s camera model to work inside my h502e useing E remote as well , I can get a video only when I plug in the quad with h502e remote off , when I try to turn on remote to bind and calibrate the signal cuts off , do I need the h502s remote or do I need to update firmware?
I really appreciate your help in this area . My problem is I have a HUBSAN 502S WITH FPV and do not have the button in the upper left corner that you refer to when binding the transmitter. I 'm able to change modes but will not bind . On my screen I'm showing at the top center of the screen two groups of numbers . The top numbers I believe has somethig to do with the frequency signal because when I changed frequency that number changed the numbers that appear are 2460 5810: 40-41- etc. the row below the numbers are all 000 000 0 0 green in color . Need some help , please
Hi JB just done some research for you as I don't have your model with the FPV Tx. However try this. Plug in the battery on your Quad-copter then hold down the camera button on the TX whilst switching on the TX this should force a rebind. (Hope this works for you) please reply cheers Stray...
Thanks for the video. I still can't get the RC to re-bind following these steps. I wish you would have shown the LEDs on the quad at each step. Those LEDs behavior shows the status of the quad. I could then compare mine and see what happens. When I power on the quad (RC off), The 4 LEDs blink a few time which indicates power on. Then it turns solid which means "GPS flight" according to the manual !!! Is this right ?
Hi Richard Thanks for the feedback the landing skids are from a helicopter ive sleeved them with some aquatic silicon air tubing. here's the landing gear site. www.banggood.com/Wholesale-WLtoys-V959-V212-V222-RC-Quadcopter-Parts-Landing-Skid-V959-15-p-61323.html
I don't own one (yet). Just reviewing various 502E related videos. That must have been super frustrating, thanks for sharing. It's so disappointing that the documentation sucks on these models. They can't even supply different front/rear prop colors.
Hi, My h502e spent a night in a tree in the rain :-( and now the red LEDs on the drone continually flash. I believe it thinks the battery is dead. (i have 4 batteries and they all get the same result.) The Tx shows dead drone battery as well. Which board(s) do you think need replacing? It seems like the drone doesn't know the battery is fully charged. BTW, it will arm and spin up but it will not take off because it thinks the battery is low. i don't know what part isn't working since it got wet. Thank You!
all parts from Bangood.com they are Helicopter skids (www.banggood.com/Wholesale-WLtoys-V959-V212-V222-RC-Quadcopter-Parts-Landing-Skid-V959-15-p-61323.html) very cheap flight time I've had 18 minute flights so far hope this helps
Hi i have a Desire x4 just like you’r drone and it has this glitch and it justo won’t take off and if it does I’ll drup like a rock as soon as you try to pull the throttle up. I’ve replaced main board battery, motors,bearings and controller 😩the problem is always the same please let me know if you can help me
I ordered a few batteries I just thought I'd try you anyway to see if you'd ever heard anyone with the same issue, I'm hoping it is just the battery. Thanks for your time
Hi cheers mate how long that give you nice any long range flight videos you done did 300 m flight Rth worked a treat want to push it how long high you been
I've never drained it completely I like to fly 15 minutes at max I use a timer alarm unfortunately i've been in hospital a while but out now on recovery so will have plenty of time to play with my toys soon
does it overheat at all? I notice quite e few of the cooling vents are covered, I have ordered one and eagerly await its arrival!!! great to know this things in advance. Many thanks.
thganks man, you are the best, i'm spanish....i calibrtae my transmiter, because he have the 501c and 502e and your Help it´s very well i suscribe and like!!! i have a chanael of drones, it's your house
Hi Shantanu I put a layer of foam under the skids then used thin cable ties through the cooling vents on the underside to hold them on. hope this helps.
little off topic but mine wobbles really badly during flight. I installed new props and calibrated the motors (hold left stick towards bottom left and wiggle right stick side to side) . the props are securely screwed onto the motors ad well
Hi Chris I'm not sure, are any of the motors tighter or rougher than the others if you spin them by hand, as you may have a rough gear or failing motor?
Hi Gadgetman Mine whistles very hi frequency I think they all do it . the battery is 1200mah from bangood. found here. www.banggood.com/YiZhan-Tarantula-X6-RC-Quadcopter-Spare-Parts-7_4V-1200mah-Battery-p-972203.html?rmmds=myorder
I have the H502E for a week now. Everything good. But since two days ik have a bad gps connection. Sometimes not more than 2 satelites. And not more than Five. Please help.
Hi There. The Truth I dont know. I know a few have gps board issue . How long have you left it searching? I know the 1st time they can take a few minutes to find enough satellites and they need good open space outside.
Good video,also do the landing skid you have are made for the 502 e or something else ,if they are made for husband do they just snap on .yours look kool plus it will keep the dirt out,I also found landing pads on eBay too
Hi JB just done some research for you as I don't have your model with the FPV Tx. However try this. Plug in the battery on your Quad-copter then hold down the camera button on the TX whilst switching on the TX this should force a rebind. (Hope this works for you) please reply cheers Stray...
Also I noticed you made your own carry case, I bought a purposely made carry case very cheap on ebay which had free bonus 2 extra stock lipos and 2 extra sets of props, and check out my first look and unboxing video, and and my other H502E the videos if you like, cheers 🙂👍
I wont be able to see if this helps me until I go down stairs and get my 501s out of the car. But I have been looking for a recalibration video for a whole day. every video just talks about spinning the quad for calibration, but none talked about the steps taken with the transmitter sticks to calibrate. and i think thats what i need right now, my hubsan drift's all over the place and will not hover in one spot to save my life.. I am hoping these steps will fix that problem..
as a matter of fact, it did help a great deal. I was terribly worried that i was going to experience that whole firmware nonsense. But thank good ness it was the transmitter stick calibration that got me all squared away in flight with no more drifting.. then my h501c came in the mail yesterday, so now I am going to try the left shoulder button (bind plane) procedure with my 501s controller and my 501c quad.. thank you straycat..
i just bought this on route from china but anyway.. what size battery is that on the bottom? how long does it actually fly on that stock batter? how long on the modded battery? also i want to add fpv the s version has a camera module i can buy it and the antena and a cheap 5.8ghz reciever and print out a holder for the transmitter and fpv i was wondering has anyone done this? it looks like the same lenth and width of the stock e non trasnmitter so i could prolly just insert it and put in the connector for power looks like it would just plug and play... and any any thoughts on this? upgrade of the firmware anyone got a link or how to do it? thanks
Mode 2 accelerate us on left stick mode 1 it's on the right and expert mode so far from what I can tell it's alot faster wayore fun but make sure you know the controller like the back of both hands.
Hi bro my name is Donnie, just subbed ya and hit the notifications. Thanks for the video, if you have facebook your welcome to join my group RC ADVENTURES INTERNATIONAL. Cheers
I had the same issue with the no binding and I had just re-calibrated the transmitter. Thanks to your video I was able rebind the transmitter to the quad.
Thanks for the reply Wayne glad your sorted
You are terrific! I've had this drone for a week & I was going crazy to get it going. Your video is a life saver. I was ready to trash the drone. The Instructions in the Manual are not specific. Thanks.
Thanks Jamie. I agree with you the instructions are sometimes difficult. Glad your up and running.
You are my hero, MAN, I called Banggood every name in the book because I went through hell trying to get this quad running, I was convinced it was defective.. Thank God for your video... I am sooooo relieved... Thanks again buddy...
Glad to help thanks for the feedback
Oh my gosh so glad you posted this there's no mention anywhere else and I got my bind back!
Glad it helped you. Thanks for the reply.
Thank you so much 63straycat!!! I got this as a gift and thought it was faulty, but your video fixed the problem. 5 minutes later...........flying, and one broken prop (my fault, not the drone) Woohoo! Thanks again.
Broken props happen keep flying and thanks for the feedback
THANK YOU, THANK YOU, THANK YOU!! I would never have figured this out without your help. I have also added your video link to the numerous posts that all complain about exactly what you have just fixed for me. Thanks for going to the trouble to resolve this.
Thanks Mandy so glad your sorted
Ur a life saver! Don't know why they would leave such an important detail out of the instructions.🤔
You are AWESOME! I've got the quad working again!!! Thank you and thank you again!!!
Thanks for doing the video mate! I've messed up my transmitter and didn't know how to set it back again...Thanks again, cheers!
Thanks for feedback Gabriel, Have fun.
Thanks so much 63 - I was frustrated and swearing as well but this did the trick. I wish they would get a good translator over there. I wonder how their customer service is.
Well done samnella9 as with alot of things a good product let down by a poor instruction book.
Thanks 63Straycat now getting closer for my first flight soon at the park after having this issue.
Cheers, I'm looking at getting and fly mode 1, so this video was exactly what was needed.
thanks for the reply Simon
To one fellow head scratcher to another... Thanks worked perfect but you have to do it exactly the way he does it. Thanks man
Thanks for the binding fix. I got the drone today and follow instruction and never was able to get it to bind. I got it NOW! Thanks a million!
Thanks for the reply glad your binding and flying now
Thank you for your Video . It is helpful to a novice me in the Quad copter world .
Hi Shantanu thanks for the reply we are all novices some just know more than others.
Thank you. This was very helpful. I will be watching it again I'm sure.
Thank you for the no bind fix!
Thanks for the feedback glad it help you
Thanks for sharing info that isn't in the user manual, and I have liked and saved this video for future reference if it ever happens to mine, and I've done some mods to mine since I've had it a couple weeks, and great quad and a lot of fun to fly
Thanks for the reply. Apparently there is a new version of the handbook which shows the rebinding sequence :)
Sorry that I have not gotten back to you . I have been in touch with the Hubsan repair center in California,and have just receive e-mail stating that there was a problem with one of the components on the board ,not specific of which one as I sent both the Quad and the Transmitter to them for inspection. They have tested and will be returning it to me .Thanks for your concern wish I could tell you which part but I was not told. Thanks Again
That was bad luck then. I Hope you get a good one next time.
Thank You . I can tell you the people that I dealt with in China and the States (California) for Hubsan could not have been more helpful and gracious and understanding . Hubsan should be proud to have employees like SHALLY and KEVIN that are trying to do the right thing for the customer. Very happy at this point and awaiting delivery on the 14 th.
This still does the trick--thanks!
Thanks a lot ! From dk. Hubsan x4 cam plus could NOT bind ! Now it works fine
hi Claes thanks for the reply glad your up and runnig.
I have it and think its a great little Quad for the price. I have heard that there is a firmware upgrade, that will cancel the compass calibration every time you change lipo's, but its not on the Hubsan site. Also there is nothing about calibrating the giro's, at the beginning of the video you mention how too calibrate te Giro, putting the left stick in left down corner a wiggel right stick, but this activates compass calibration and not the Giro's Nice review, thanks fore sharing
Thanks for the reply Raudy its my first proper commentary video I've done but I thought it was needed
Put the left stick to the right instead , and right stick dose same motions
Thanks, Just git mine. Really learning a lot of details.
good luck with it Peter thanks for feedback
YOU ARE A LIFESAVER!!! THANK YOU... THANK YOU...
Thanks for the feedback really glad you got it back
Straycat , Maybe you could help me in another area . As I have mention I have a H502s that I'm building with parts that I had order earlier.Not all the parts are listed in the manual for purchase. What I 'm looking for is the two antennas that are in the frame of the quad. One is attach to the receiver board by ulf\ipx connector and the other to the camera module in the same way .My question is would you have any idea where to find these and or would you know the specs on them as far as length and maybe away to make them. Sorry there is alot there but I have been searching but can not find anything concerning the build on these antennas .Thanks
try something like this 2.4G Receiver Antenna Omnidirectional IPEX Port Compatible Futaba JR WFLY. www.banggood.com/3DBI-Brass-2_4G-Receiver-Antenna-Omnidirectional-IPEX-Port-Compatible-Futaba-JR-WFLY-p-1032401.html?rmmds=search from Bangood but most suppliers should have something like it.
Thank you for reply ,but what is so great about quadcopter community is that someone reads a inquiry about a problem and almost instantly someone will reply or direct you to right area . Again I appreciate your help.
Thats how it works buddy :)
hey i got this but i also bought the 502s controller transmitter ill be able to rebind it to the 502s transmitter right? i saw some one else do this and they were able to use it like the 502s so pretty much no difference between them besides the transmitter right?
I really don't know Blaze I only have the 501 but good luck
How do I get the h502s camera model to work inside my h502e useing E remote as well , I can get a video only when I plug in the quad with h502e remote off , when I try to turn on remote to bind and calibrate the signal cuts off , do I need the h502s remote or do I need to update firmware?
Hello
a question, how did you put a camera under the drone?
like food
Thank you
I really appreciate your help in this area . My problem is I have a HUBSAN 502S WITH FPV and do not have the button in the upper left corner that you refer to when binding the transmitter. I 'm able to change modes but will not bind . On my screen I'm showing at the top center of the screen two groups of numbers . The top numbers I believe has somethig to do with the frequency signal because when I changed frequency that number changed the numbers that appear are 2460 5810: 40-41- etc. the row below the numbers are all 000 000 0 0 green in color . Need some help , please
Hi JB Sorry I don't have the 502s which has a different TX with the FPV. I'm sure someone will know how to rebind it though. Good luck
Hi JB just done some research for you as I don't have your model with the FPV Tx. However try this. Plug in the battery on your Quad-copter then hold down the camera button on the TX whilst switching on the TX this should force a rebind. (Hope this works for you) please reply cheers Stray...
Many thanks 2 u. My H502E works again
Thanks for the video. I still can't get the RC to re-bind following these steps. I wish you would have shown the LEDs on the quad at each step. Those LEDs behavior shows the status of the quad. I could then compare mine and see what happens.
When I power on the quad (RC off), The 4 LEDs blink a few time which indicates power on. Then it turns solid which means "GPS flight" according to the manual !!! Is this right ?
Hi. recently I bought a drone and can not pass the calibration number two. As I can make this work?
have you got it working yet? what drone is it?
Like the idea of the landing skids . What did you use to make them ?
Hi Richard Thanks for the feedback the landing skids are from a helicopter ive sleeved them with some aquatic silicon air tubing. here's the landing gear site. www.banggood.com/Wholesale-WLtoys-V959-V212-V222-RC-Quadcopter-Parts-Landing-Skid-V959-15-p-61323.html
Did effect the handling with it on ?
I've used cable ties to attach the landing skids to the copter and used foam in between to absorb any vibration works well for me.
handling is fine with the skids on. and the bigger battery.
I don't own one (yet). Just reviewing various 502E related videos. That must have been super frustrating, thanks for sharing. It's so disappointing that the documentation sucks on these models. They can't even supply different front/rear prop colors.
Thanks for the feedback, I agree front and rear prop colour difference is a must for me.
Tks Sr Work perfect . From Venezuela
Thanks for the reply Hohann
Hi, My h502e spent a night in a tree in the rain :-( and now the red LEDs on the drone continually flash. I believe it thinks the battery is dead. (i have 4 batteries and they all get the same result.) The Tx shows dead drone battery as well. Which board(s) do you think need replacing? It seems like the drone doesn't know the battery is fully charged. BTW, it will arm and spin up but it will not take off because it thinks the battery is low. i don't know what part isn't working since it got wet. Thank You!
Thanks..... worked perfectly.
well done glad it worked
What's the flight time with the extra battery? and where did you get the legs?
all parts from Bangood.com they are Helicopter skids (www.banggood.com/Wholesale-WLtoys-V959-V212-V222-RC-Quadcopter-Parts-Landing-Skid-V959-15-p-61323.html) very cheap flight time I've had 18 minute flights so far hope this helps
Hi i have a Desire x4 just like you’r drone and it has this glitch and it justo won’t take off and if it does I’ll drup like a rock as soon as you try to pull the throttle up.
I’ve replaced main board battery, motors,bearings and controller 😩the problem is always the same please let me know if you can help me
i am trying to bind my drone and transmitter when i follow ur instructions i get a flashing H on the transmitter?
It works for me! Thanks!
Thanks for the feedback Carlos
Where did you get the landing pads,mine didn't come with those,and if I want prop guards I have to send for those
Hi Ron Thanks for the feedback. The landing skids came from bangood.com they are not available now however the do still sell other landing skids...
my H502e transmitter all of a sudden shows symbol for empty battery on Quadcopter but I just fully charged it? Any idea what this can be?
Hi Arnold I really dont know have you got another battery to try and compare it with? maybe a faulty battery?
I ordered a few batteries I just thought I'd try you anyway to see if you'd ever heard anyone with the same issue, I'm hoping it is just the battery. Thanks for your time
Hi cheers mate how long that give you nice any long range flight videos you done did 300 m flight Rth worked a treat want to push it how long high you been
I've never drained it completely I like to fly 15 minutes at max I use a timer alarm unfortunately i've been in hospital a while but out now on recovery so will have plenty of time to play with my toys soon
Nice to hear cool I'm ordering one soon cheers mate
thanks for the video. I was going to send it back, but not now.
does it overheat at all? I notice quite e few of the cooling vents are covered, I have ordered one and eagerly await its arrival!!! great to know this things in advance. Many thanks.
Hi Ron Thanks for the reply. No I've not noticed any heat at all. although the the landing gear is over the vents they are still pretty much open.
thganks man, you are the best, i'm spanish....i calibrtae my transmiter, because he have the 501c and 502e and your Help it´s very well i suscribe and like!!! i have a chanael of drones, it's your house
Glad your working now . thanks for the reply
Can you share how you added landing Skids ?
Hi Shantanu I put a layer of foam under the skids then used thin cable ties through the cooling vents on the underside to hold them on. hope this helps.
Thanks for the info , i will try a similar rig .
The Foam is there to absorb vibration and let the vents breathe.
thanks for the video my drone is back again
little off topic but mine wobbles really badly during flight. I installed new props and calibrated the motors (hold left stick towards bottom left and wiggle right stick side to side) . the props are securely screwed onto the motors ad well
Hi Chris I'm not sure, are any of the motors tighter or rougher than the others if you spin them by hand, as you may have a rough gear or failing motor?
Please help if you can after rebonding my transmitter the joysticks are reverse now how can I get them to reset
Hey thank you for this video. Fixed it.👍🏼
Thank you very much, sir!
Thanks for feedback glad your sorted
Does your quad humming when on
Hi Gadgetman Mine whistles very hi frequency I think they all do it . the battery is 1200mah from bangood. found here. www.banggood.com/YiZhan-Tarantula-X6-RC-Quadcopter-Spare-Parts-7_4V-1200mah-Battery-p-972203.html?rmmds=myorder
63Straycat I'm using eachine TX O3 Fpv camera system got 300 m on 350 mah 1s cell nice under 10 grams setup
nice watch out for overloading it though may shorten motor life
Ya but they cheap enough going to buy lots of parts also looking into different props longer bigger pitch better for speed and load lifting
Nice thanks for sharing that battery link, I I'm going to buy one as I like to fly mine long distance
I have the H502E for a week now.
Everything good. But since two days ik have a bad gps connection. Sometimes not more than 2 satelites. And not more than Five. Please help.
Hi There. The Truth I dont know. I know a few have gps board issue . How long have you left it searching? I know the 1st time they can take a few minutes to find enough satellites and they need good open space outside.
Good video,also do the landing skid you have are made for the 502 e or something else ,if they are made for husband do they just snap on .yours look kool plus it will keep the dirt out,I also found landing pads on eBay too
THANKS 63 for quick response . I'm still trying with no
luck
Hi JB just done some research for you as I don't have your model with the FPV Tx. However try this. Plug in the battery on your Quad-copter then hold down the camera button on the TX whilst switching on the TX this should force a rebind. (Hope this works for you) please reply cheers Stray...
Good job. Very helpful.
Thanks for the reply
is this work on Ky 102 quadcopter 🥺drone cant bind with remote help🥺
Straycat, you saved the day. However, the quadcopter did not arm despite pushing both sticks to the lower left and right. Any suggestions?
glad you have bind now however not arming I don't know when you fix it let us know sounds like a transmitter problem maybe
It still did not work. I might have damaged the transmitter probably as the motors look good. took it apart and saw no issues.
Also I noticed you made your own carry case, I bought a purposely made carry case very cheap on ebay which had free bonus 2 extra stock lipos and 2 extra sets of props, and check out my first look and unboxing video, and and my other H502E the videos if you like, cheers 🙂👍
I wont be able to see if this helps me until I go down stairs and get my 501s out of the car. But I have been looking for a recalibration video for a whole day. every video just talks about spinning the quad for calibration, but none talked about the steps taken with the transmitter sticks to calibrate. and i think thats what i need right now, my hubsan drift's all over the place and will not hover in one spot to save my life.. I am hoping these steps will fix that problem..
I hope it helps
as a matter of fact, it did help a great deal. I was terribly worried that i was going to experience that whole firmware nonsense. But thank good ness it was the transmitter stick calibration that got me all squared away in flight with no more drifting.. then my h501c came in the mail yesterday, so now I am going to try the left shoulder button (bind plane) procedure with my 501s controller and my 501c quad.. thank you straycat..
Thanks again for the feedback glad your up and flying :)
Cheers what max mah 2s battery
OMG, THANK U SO MUCH!!!!
Thanks for the reply Jay
i just bought this on route from china but anyway.. what size battery is that on the bottom? how long does it actually fly on that stock batter? how long on the modded battery?
also i want to add fpv the s version has a camera module i can buy it and the antena and a cheap 5.8ghz reciever and print out a holder for the transmitter and fpv i was wondering has anyone done this? it looks like the same lenth and width of the stock e non trasnmitter so i could prolly just insert it and put in the connector for power looks like it would just plug and play... and any
any thoughts on this? upgrade of the firmware anyone got a link or how to do it? thanks
A massive thanks you !
Hey Hey Roche Glad it helped thanks for the reply
This model headless mode????
I can't get the transmitter to say set compass one I have never flies the drone either I just got it plz help me I want to fly it
thanks you've saved me)
well done and thanks for the reply
Thank you!!!
thanks for the reply Steven
OMG! Thanks!
Hi Jim glad your sorted. Enjoy your flights.
Ty very much 502. 507D. Thanks
Thanks a bunch pal!
i have 0 gps signal all the time , any idea?
do you have the 502E or S
h502e it connects with the drone but the gps signal remains 0 all the time :/ i just bought it btw
Sounds like a gps board problem talk to your vendor
63Straycat Think you are right, also a lose wire
cheers thank you it worked :p strange
Amazing video, was convinced mine was bust, does anyone know what the different modes do
Mode 2 accelerate us on left stick mode 1 it's on the right and expert mode so far from what I can tell it's alot faster wayore fun but make sure you know the controller like the back of both hands.
thanks so much
Glad to help Cheetah
i have a problem with my h502e the motor starts but when i lift the throttle it wont fly please help me
Have you got the propellers on the right motors?
lol
I only said that because I've done it myself on another quadcopter
63Straycat Ok wel it can get confusing
Thank you sir
thankyou!
Your Welcome :)
Omfg why the hell have they made the calibration THIS complicated :((
Thanks for the video now, hoping I will fly mine one aswell....
thanks for the reply
Also if you call husban they have tech.support.
Hi bro my name is Donnie, just subbed ya and hit the notifications. Thanks for the video, if you have facebook your welcome to join my group RC ADVENTURES INTERNATIONAL. Cheers
Thanks for the information. Joining the channel #Like285 #Like285ttys God bless
Looks heavy
hello I changed the board for a new version but I can't connect the control even doing this process have any ideas please thanks
Thanks so much