Unveiled: ECU swap and Mercedes immobilizer programming

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 150

  • @hrout
    @hrout 5 ปีที่แล้ว +21

    Man you saved my pocket!!!!!! 1000000% worked for me
    Can’t express my gratitude
    Thank you so much

  • @robertohernandezcruz9759
    @robertohernandezcruz9759 6 ปีที่แล้ว +5

    I did it in a Mercedes Benz E320 W211 chassis, it is working perfect. Thank you very much for the video.

  • @travelingjimmy4248
    @travelingjimmy4248 10 ปีที่แล้ว +2

    Thank you so much for sharing this information. this information got my car to start tonight .I have been broke down for over an hour until I watch your video,Thanks a lot!

  • @ahura-mazda465
    @ahura-mazda465 9 ปีที่แล้ว +3

    I have done a 200 ML320 ecu swap. Same location for EEPROM. I used Chip Quik to remove chips safely. I cleaned the board with wick. Its very easy that way.

  • @train4905
    @train4905 3 ปีที่แล้ว +1

    Fantastic job sir.steve from the uk.

  • @j24maybe
    @j24maybe 9 ปีที่แล้ว +3

    Thank you for revealing this simple fix! It worked just like your described using an identically versioned ECU. I used a W211 as the donor for a W209 failed ECU. Kudos for sharing the tip!

    • @ciasteczkowypotwooor
      @ciasteczkowypotwooor 8 ปีที่แล้ว

      This is practices are not permitted heating with amateur Hot Air. In this way You can incinerated processor Motorola HC11. They can also incinerate peripherals items and PCBs. Damage can occur after a period of time. Items can fall off. Creating danger on the road.

    • @j24maybe
      @j24maybe 8 ปีที่แล้ว

      Latent damage of chips or the PWB is always possible when using either a solder iron or hot air. Of course care must be taken and you have to know what you're doing. "Professional" hot air stations can be just as damaging with the heat. Any tool in any idiot's hands is likely to be dangerous. I'm happy to say that I'm a professional.

    • @Man-Up-G
      @Man-Up-G ปีที่แล้ว

      So then the part numbers DO NOT have to be identical, is what you’re saying correct?

  • @ipartyitravel8249
    @ipartyitravel8249 4 ปีที่แล้ว +2

    It works for me! after second times soldering.

  • @oscarbravo8360
    @oscarbravo8360 9 หลายเดือนก่อน +1

    The eprom memory brings the information to be loaded into the ezs w210 module

  • @stanleycris2323
    @stanleycris2323 2 ปีที่แล้ว +1

    Very helpful. I'm impressed. Question: I have an old 1996 c220 with 2.2 l engine (w202 chassis). Do you know if the immobilizer chip is on the front of the board or the back of the board? I only see two 8 pin dip ic s on the pcb. Neither one is the number on your more modern example. It probably predates the one in the vid. I'm guessing that it is one of these two chips. The rest are much larger.

  • @ousman997
    @ousman997 4 ปีที่แล้ว +1

    Appreciate it Big man enough respect to u

  • @Bosby7
    @Bosby7 8 ปีที่แล้ว +2

    hi i need help in finding the eeprom on my w203 045 the ecu board has only one side

  • @mostafazezo5160
    @mostafazezo5160 4 ปีที่แล้ว +1

    there is other thing need after exchange this chip or thats all no need other programing

  • @mase886
    @mase886 8 ปีที่แล้ว +1

    Just did it to a spare ECU with same HW but DIFFERENT p/n (from a w211 donor car) and car (which is w219 model) does not start, besides throwing ABS/ESP error. I'm now wondering if some further data needing to be copied are stored somewhere else....

  • @MR-ps4xk
    @MR-ps4xk 3 ปีที่แล้ว

    Dan, do you have any presentation on GMC 2014 Acadia? Passengers side air bag light stays on.

  • @davidmejah7309
    @davidmejah7309 10 ปีที่แล้ว +2

    thanks for the video i need somebody to do this for my car

  • @phapnguyenvan2007
    @phapnguyenvan2007 ปีที่แล้ว +1

    Good job

  • @bogdankarman9831
    @bogdankarman9831 5 ปีที่แล้ว

    Yes if done correctly must need to make sure the chip is installed correctly and taking it off not to break the pins as we had ppl try doing it themself and then shiping it out to us to fix it
    If you try and break pins won’t be possible to recover info

  • @Casmige
    @Casmige 5 ปีที่แล้ว +2

    I got ripped off by a used car dealer (Ruslan Brovarsky, Austin TX) on a 2003 C230K
    Apparently?? The key, door-lock, immobilizer, the ignition tumbler/switch along with the ECM Was all swapped from another car.
    I Don’t have the original ECM.
    From what I understand the reason nothing works on the car even though it starts and runs? It’s because I don’t have the original build file in the ECM to match the car.
    When I scanned the present ECM the Vin number is not even where it is supposed to be, it’s just blank.
    Any ideas what I can do?.
    My only recourse is to go to the dealer and buy a $2000 OEM ECM along with their labour and the pre-diagnostic review.

  • @mahmoudhantouli5434
    @mahmoudhantouli5434 7 ปีที่แล้ว +2

    Man you doing a great job but I have a question what can of software do you have to know which chip this is the EEprom can you help me please

  • @phareztrinimand
    @phareztrinimand 11 หลายเดือนก่อน

    Is p flash and d flash needed when replacing ecu,? Or just eeprom

  • @saesedanten
    @saesedanten 3 ปีที่แล้ว

    Hi,, Great from sae sedanten, indonesia
    I wan ask. . I have toyota grand avanza car 2017, i just changed the ECU, the car cant start and the immobilizer indicator doesn't flicker either. What should i do? Thanks 🙏

  • @Alien_Tech_ICP
    @Alien_Tech_ICP 4 ปีที่แล้ว +1

    Can you do this on a Mercedes sprinter 2012?

  • @jonthomas3503
    @jonthomas3503 4 ปีที่แล้ว

    I have 2005 c230 komp with bad code line on cylinder two causing a miss fire so I bought a used ecm to swap. My ecm is sealed (a2711538779) and the layout is totally different. Would you happen to know which eprom it might be? There are three matching yours; (62506 0526), (L9637d 9526), (2272m 54t d6tf). Thanks and much appreciated!

  • @elkarshofyelkarshofy8444
    @elkarshofyelkarshofy8444 5 ปีที่แล้ว +1

    hank you very much for the video

  • @amadoujallow5939
    @amadoujallow5939 ปีที่แล้ว

    Nice job

  • @alanruiz6991
    @alanruiz6991 ปีที่แล้ว

    2003 Mercedes e320, I swapped eeproms. Car will crank start then die twice and then won’t crank at all. Thoughts ?

  • @izzzzzz6
    @izzzzzz6 2 ปีที่แล้ว

    I would have done that with a soldering iron. Very nice work. Do you have any info on sprinter vans? I'm trying to do an ecu swap with a van with the same engine. i took the key the console and the key decoder behind the console plus ecu from a van with the same engine. Now i'm getting the start error message. Is there an eprom swap or a reprogram i need to do? I thought taking all of the above accessories across from the donor would be enough. Last thing is i have a tachograph on my vehicle which is why i am trying to swap ecu's i wish to remove the tacho. I'm stuck in limp mode after previously trying to remove the tacho. i guess as soon as you cut the permanent positive of the tachograph unit it looses it's handshake with the ecu. I'm now stuck in limp mode and the donor ecu doesn't work.
    Could you explain to me why you would need to swap the eprom if you have all of the above electronics from the donor vehicle? What is there left that wants to recognise the original eprom? or do you only do this when you don't have the new console and key transponder (IMMO / SKREEM) box
    The only other difference i can see is that my van has a KITAS speed sensor by the output shaft of the transmission soi need to go back to donor van and see if it has some sort of speed sensor and how it plugs into the ecu etc. the kitas sensor is for the tacho and first plugs into the back of the unit, then the tacho device sends can bus and 2 other signals out to the ecu / cluster. I'm pretty stuck here.

    • @leelas9467
      @leelas9467 ปีที่แล้ว

      Did you find a fix for this?

  • @CarsReview1
    @CarsReview1 2 ปีที่แล้ว

    On my e55 i used to get diffent missfire codes po300 , 305to 308 and then (JUST) removed put back the ecu gave me whole diffrent codes and engine working rly bad. Comming to an idea that i need a ecu. Imma get a used one and i have the stock files from mine , can i just rewrite the (new) used ecu imma get from a CL55 ? Thanks

  • @regularcustomer9589
    @regularcustomer9589 7 ปีที่แล้ว +2

    ECU went bad on my 2001 C240 tried this and it fired up immediately. Amazing idea was wondering if anyone knows if this method works on other makes besides Mercedes.

  • @TJKwon000
    @TJKwon000 9 ปีที่แล้ว +2

    I was able to figure the eprom chip is 95080 on e550 ecu and switched the eprom chips between my original and used ecu i bought. the ECU i bought now has VIN of my original car. (OBD reader read the VIN). But I still can't start the car!

  • @keithmajor1432
    @keithmajor1432 8 ปีที่แล้ว +1

    thanks can u till what is immoblilzer chip id for the 2000 mercedes ml-320 ecu

    • @pacodinero7036
      @pacodinero7036 5 ปีที่แล้ว

      Keith Major did you ever find this info ... I got a ml350 2009

  • @ioelrusso
    @ioelrusso 2 ปีที่แล้ว

    Hello, good afternoon. I have the following problem. I am from Chile, Temuco region, in the south of Chile, and I have a Mercedes W203 C240 2.6 V6, year 2005.
    in this region it rains a lot and one day the car did not start anymore I started to check and I realized that the ecu does not work because I scanned it with a launch 431x and it does not recognize the ecu I took it out and sent it to check something that had a little of humidity the man who repaired it for me said that it is good now but it does the same thing as before I put in the key it recognizes the key the car turns 1 lap the usual lights turn on the 2nd lap it would be hard to hear the pump not being heard and the 3rd ignition turn does not do anything nor does the engine turn but the electro fan of the engine is heard at maximum.
    What can I do or what ecu can help me since I have the car thrown away

  • @davidrible2354
    @davidrible2354 4 ปีที่แล้ว

    I have a 1998 MB SL500 and the Siemens 129-820-37-26 has been damaged. What do I need to do to get a replacement? Do you know if I can just get a new one with keys and is it plug and play?

  • @worldbrothers158
    @worldbrothers158 5 ปีที่แล้ว

    how about 2007 c230 would you able to know where is the transponder chip located ?

  • @robgee5469
    @robgee5469 6 ปีที่แล้ว +3

    Great video VEHIX411
    Just one quick question -
    Do you have to do any more re-programming to the donor ECU once swapping that EPROM, or do you swap that chip and re-fit the ECU to the car and it’s all done?

    • @leopereira9922
      @leopereira9922 6 ปีที่แล้ว

      Hi I have Benz S320 ECU damaged water went in I have other ECU good can you fixe & how much it cost & what do you require from me

    • @leopereira9922
      @leopereira9922 6 ปีที่แล้ว

      My contact 00267 74019444 or can you give me you email or Skype contacts

    • @motorengineering1296
      @motorengineering1296 5 ปีที่แล้ว

      Kindly contact me leo. I can do this for you. it's MotorE +917744827519

    • @jakekurland3568
      @jakekurland3568 5 ปีที่แล้ว

      Motor Engineering I have an e550 2007 needing a new ecu. Can you reprogram the new one?

    • @motorengineering1296
      @motorengineering1296 5 ปีที่แล้ว

      @@jakekurland3568 yes I can. Pls send me details

  • @rohanboswell5408
    @rohanboswell5408 3 หลายเดือนก่อน

    Will it work on a 2004 c240 with one from a 2005

  • @motorengineering1296
    @motorengineering1296 5 ปีที่แล้ว

    Hi, I have S350 model with battery drain issue. I found the trouble is in the ECU. I have got another from junk, but the Eprom is a bit different in both. Is it ok to change it? Plz guide

  • @Alien_Tech_ICP
    @Alien_Tech_ICP 5 ปีที่แล้ว

    I’m trying to do a 2011 sprinter with a 2012 ecu where the numbers match so would this work on that?

  • @smithjo4152
    @smithjo4152 5 ปีที่แล้ว

    Did you have a problem that lead you to buying a new ecu? I have a 2001 S500 that has intermittent starting. My dash lights come on no crank. Then I keep trying and after several attempts the car starts. Any ideas of what I should look for what might be causing this problem and what I may need to do to fix the problem? Thank you in advance for any assistance.

  • @MsXfusion
    @MsXfusion 2 ปีที่แล้ว

    Can I use the key, ignition ecu and shifter from a s500 4matic same year in my base model s500 ?? Will that work ?

  • @johnbarns3122
    @johnbarns3122 3 ปีที่แล้ว

    how do you intall main computer in 2008 sclass 550 mercedes

  • @villantiofficial
    @villantiofficial ปีที่แล้ว

    Is there a way to rest counter?

  • @racingtoy2000
    @racingtoy2000 4 ปีที่แล้ว

    Can i swap eproms on 06 e320cdi? my ecu is gone, getting one fom junkyard.

  • @Hassassain
    @Hassassain 8 ปีที่แล้ว

    Would the donor ECU (the new used one) need to have come from the same exact C class model in order for it to function after swapping chips? or is their programming required after the chip has been swapped?

    • @vehix411
      @vehix411  8 ปีที่แล้ว +2

      exact part number and then this chip method will work

  • @arismelendez5004
    @arismelendez5004 4 ปีที่แล้ว

    Hey man, i need some advice. I just bought a Mercedes sprinter 2006. It has some problem with communication computer and the star signal wont show. I have a car scanner abd i tried to read the codes but it will just show "error in communication". Im just asking if thier is some way you can give an advice that could help me out.
    Thanks

  • @DVLZHAZE
    @DVLZHAZE 5 ปีที่แล้ว +1

    can you do this with the bosch me9.7? mines is on the w211

    • @vehix411
      @vehix411  5 ปีที่แล้ว

      No you need Kteg you can see on my other video

  • @juliakneebone5742
    @juliakneebone5742 3 ปีที่แล้ว

    Hi i change lock jam in ignition ecu and neiman .now contact key is good but not start.can i swap it..im not shure if my old ecu is lock on engine please help jc

  • @DVLZHAZE
    @DVLZHAZE 8 ปีที่แล้ว +2

    Is this for the n51 board

    • @DVLZHAZE
      @DVLZHAZE 8 ปีที่แล้ว

      Airmatic control

  • @mikei.7425
    @mikei.7425 3 ปีที่แล้ว

    In your other video, you used the CARPROG to read and write the eeprom. Could you have used the same tool here to avoid removing the chip?

    • @vehix411
      @vehix411  3 ปีที่แล้ว +1

      You can if you have it
      sometimes it still requires to remove it to read and write Becouse on board it don’t want to read the chip

  • @mariosegoo
    @mariosegoo 8 ปีที่แล้ว

    is it possible to separate pcb from metal housing? i can hear something felt off under pcb but cannot access. I suppose pcb is glued to metal housing?

  • @alejandropatrickowenmenian2341
    @alejandropatrickowenmenian2341 2 ปีที่แล้ว

    Is this what you do to not have to change the ignition ?

  • @buckcustom233
    @buckcustom233 9 ปีที่แล้ว

    What is the eprom location # for a 2000 s500 w220 there are two similar eproms on my w220 need to know what one is immbolizer thanks!

  • @JOBOTS
    @JOBOTS 7 ปีที่แล้ว

    hi i vehix411, im from philippines...i bought the same ECU on my Kia Rio 2006 Manual Transmission, it's cranking but don't start and check engine is lighted and blinking, but we make start the car buy shutting the gas pedal..but it shutting off.Can you tell me if i need to reprogram the ECU swapped on my car? yet its the same..thanks

  • @jamesthorn3336
    @jamesthorn3336 7 ปีที่แล้ว

    hi can you do the same with the eis module for a s320 cdi

  • @curtrobbins7586
    @curtrobbins7586 4 ปีที่แล้ว

    what if i replaced my eis esl and ecu , due to lost keys and messed up ignition eis, come from doner car but numbers arnt same as my original , car starts but no power windiows or turnsignals, can i put imobiliser chip into my original , ? and if not what do i need to do ?

  • @410kane
    @410kane 7 ปีที่แล้ว

    good idea using the aluminum foil. dont know why i havent thought of that

  • @symbianfreak01
    @symbianfreak01 5 ปีที่แล้ว

    Where is this chip located on a 1999 mercedes e320 ECU is pretty similar to the one on the video

    • @ballislyfe5814
      @ballislyfe5814 5 ปีที่แล้ว

      Carlos Chavez hey did u find where the chip was located on the e320 ecu?

  • @mahmoudhantouli5434
    @mahmoudhantouli5434 5 ปีที่แล้ว

    Dear friend I have question about your Experience on 2008 Mercedes E350 W211 where the EEprom location please let me know thank you

    • @vehix411
      @vehix411  5 ปีที่แล้ว +1

      That year you need ktag reader security in 3 location chip and 2 processors

    • @mahmoudhantouli5434
      @mahmoudhantouli5434 5 ปีที่แล้ว

      @@vehix411
      Dear friend i do have Ktag but I can't find the location

  • @rastaron2028
    @rastaron2028 4 ปีที่แล้ว

    Will this fix the problem for a Cl500 ? One day I came out to start it up and nothing worked...the unlock or lock button didn’t work and the ignition wouldn’t budge so I order a new key fob from Benz and it still didn’t work the only thing that comes on are the dash to show the mileage and the temperature...any advice ? I’ll appreciate it

    • @vehix411
      @vehix411  4 ปีที่แล้ว +1

      You need to diagnose first and then see if your computer is bad then this service is for you

    • @auck1969
      @auck1969 หลายเดือนก่อน

      ​@@vehix411Will this process work for a 2006 mercedes s430? I'd appreciate a response if you're not too terribly busy. It looks like this will be the best route to go to save a crap ton of money and time. Thanks for taking the time to make such an awesome video to help so many people out there with this particular problem. It can definitely be daunting for people like myself who are stuck on what to do. Thanks again!

  • @I3lackl3ear
    @I3lackl3ear 5 ปีที่แล้ว

    can I do this with a 2003 sprinter van ecu?

  • @jailerdiaz
    @jailerdiaz 2 ปีที่แล้ว

    i have a 2009 mercedes c350 with a bad PCM, I bought an used one and swap the EEPROM chip, now thw car wont crank or start, please any advise. thanks

    • @vehix411
      @vehix411  2 ปีที่แล้ว

      Maybe you installed it wrong or damage the eprom pins

  • @akosuankansah7848
    @akosuankansah7848 6 ปีที่แล้ว

    great video

  • @TechBen19
    @TechBen19 9 ปีที่แล้ว +1

    How to identify if that is the immobilizer chip for other vehicle

  • @xxsqqs9380
    @xxsqqs9380 6 ปีที่แล้ว

    Hi do u know where its located on a vito 108 2000 ecu cuz i cant find it help pleaseee

  • @ndourmaiyane4306
    @ndourmaiyane4306 8 ปีที่แล้ว

    i have mercedes w211 e270 and can start they tell me i have ecu so can u tell me if ihave solution to fix it because orijinal not like the new one plz help

  • @Alien_Tech_ICP
    @Alien_Tech_ICP 4 ปีที่แล้ว

    Does that work on Mercedes sprinter 2011?

  • @milanpariyar8400
    @milanpariyar8400 7 ปีที่แล้ว

    I have one seme probleam ecu swap but not start but this vehicle is ford fista i can chenj this chip how can find eeprom chip pilase tell some idea

  • @sh0ckerturb0
    @sh0ckerturb0 9 ปีที่แล้ว

    Will his work for a 2001 ml320?

  • @NDLAP66
    @NDLAP66 6 ปีที่แล้ว

    I have a 2000 Mercedes S500, looks like I have 2 eeproms, well...two 8 leg chips same size. can you tell me which one to tackle?

  • @CaseTheCorvetteMan
    @CaseTheCorvetteMan 6 ปีที่แล้ว +1

    You could do that so much quicker using solder paste

  • @scott_larsen
    @scott_larsen 6 ปีที่แล้ว

    1996 c220 - board looks different. How can I identify the chip to swap"

  • @CaseTheCorvetteMan
    @CaseTheCorvetteMan 5 ปีที่แล้ว

    Will this work in a W210 E55 ECU? I have 2 of them and want to swap the ECU to see if there is an issue with one ECU.

    • @Infinitpossibilities
      @Infinitpossibilities 5 ปีที่แล้ว

      I heard that if its a no obd coms ecu and you do direct swap with one of the same but not tampered with you should find (although your car still will not start) but you now have ecu coms.....then it is confirmed that your ecu is stuffed.

  • @mahmoudhantouli5434
    @mahmoudhantouli5434 7 ปีที่แล้ว

    dear friends are you familiar with 08 Benz C350 sport how I can do it with OBD 2 please let me know

  • @redfishchef
    @redfishchef 9 ปีที่แล้ว

    I am so excited to do this/ I get home and then watch again- that's when j fought you say 2000-2005. I have a 96 Mercedes s320. Will it still work

    • @sonjimason21
      @sonjimason21 8 ปีที่แล้ว

      Did yours work? And can you do a C240 to a E320? it's compatible but my 97 E320 want stay running with the C240 ECU

  • @michobebemckawi
    @michobebemckawi 3 ปีที่แล้ว

    MY C32 AMG is very hard to come by. Is there any way for me to try this on C320 ECU just to see if the car starts?

    • @2fun2beme
      @2fun2beme 3 ปีที่แล้ว

      As long as it is the same part number it will work.
      Same mb part number is important

  • @vaskomesperli9582
    @vaskomesperli9582 9 ปีที่แล้ว

    Ihave a problem with my ml 320 model 2000 ,the problem is he was catch the break suddenly without im do anything ,the teqnission tell me the exclaration senser is not working well ,because the scanner show like that .& the cost is expensive

  • @paulanthonyhacher2857
    @paulanthonyhacher2857 9 ปีที่แล้ว

    Yo good that's wuzup it work out every single step it finnaly start it.....

  • @B_R_I_A_N_108
    @B_R_I_A_N_108 2 ปีที่แล้ว

    I have an s500 ‘98 the ECU is not communicating with Reader Starts and drives it’s not shifting

  • @elkarshofyelkarshofy1490
    @elkarshofyelkarshofy1490 5 ปีที่แล้ว +1

    Thanks

  • @augustinesampeney8097
    @augustinesampeney8097 8 ปีที่แล้ว +1

    amazing

  • @luchoflowstone
    @luchoflowstone 6 ปีที่แล้ว

    Hello. Where is an ECU in A190 w168 ? I cant found.

  • @albertmcgill31
    @albertmcgill31 3 ปีที่แล้ว

    The message I just sent it was on a 1993 500SEL Mercedes it was on the ECM unit that was bad can you repair

  • @JamesFFHarris
    @JamesFFHarris ปีที่แล้ว

    The Dealer told me my car, 2004 ML350, can not be fixed. The AAM went out and is now obsolete. Does anyone know a work a round because these computer are specific to each car and you can not substitute used parts. Great body , tires, interior, I need help!?

  • @motochiptuning
    @motochiptuning 10 ปีที่แล้ว

    from where do you know what chip to look for?

  • @surani786
    @surani786 8 ปีที่แล้ว

    I did and I am able to start and drive the car for about a block before it start missing real bad where I cannot go anywhere until I turn the car off and turn it back on and able to drive for another block before it mess up again

  • @karlsvatos7060
    @karlsvatos7060 8 ปีที่แล้ว

    does anyone know how to locate the eprom chip in benz?

  • @amauryrodriguez9287
    @amauryrodriguez9287 2 ปีที่แล้ว

    How much would this swap cost 💲

  • @albertmcgill31
    @albertmcgill31 3 ปีที่แล้ว

    I had purchased a DTC coder from Rick he tells me my ECM is bad can you repair

  • @ashley.v23
    @ashley.v23 7 ปีที่แล้ว

    Does anyone know if this would work for a 2004 Sprinter 2500?

  • @Halil.klaudija
    @Halil.klaudija 2 ปีที่แล้ว

    Bro work this on vw change chip

  • @jasonmcdaniel8369
    @jasonmcdaniel8369 3 ปีที่แล้ว +1

    Might wanna set the acetone somewhere else

  • @harjindersingh46
    @harjindersingh46 7 ปีที่แล้ว

    helle it can work on s350 mercedes benz 2003 vin is w220

  • @BahaaElhalawaty
    @BahaaElhalawaty 7 ปีที่แล้ว

    any updates

  • @vehix411
    @vehix411  10 ปีที่แล้ว

  • @WillieWheels
    @WillieWheels 9 ปีที่แล้ว

    how do I identify my chip for my w220 s430

    • @2fun2beme
      @2fun2beme 3 ปีที่แล้ว

      I have a w220 also, S500. Same situation. My ecm looses communication. Shop in FLORIDA says all of a sudden it's not repairable.
      What did you do?

  • @ramzankhannajeebkhan4704
    @ramzankhannajeebkhan4704 5 ปีที่แล้ว

    Hi sir i need your help

  • @Edi-yd7fl
    @Edi-yd7fl 4 ปีที่แล้ว

    What can i do, if The chip ist destroyed 😔

  • @phil8867
    @phil8867 9 ปีที่แล้ว

    Do you have a chip number for the 04 Acura TL?

  • @anden934
    @anden934 3 ปีที่แล้ว

    What happens if i just take it of?will the car start? I wonder becuse the transponder chip in the key is gone..

  • @lamontdavis6212
    @lamontdavis6212 9 ปีที่แล้ว

    HOW CAN I DECODE THE ABC SYSTEM ?