Did you solder behind the resistor or in front the picture is not clear, and on the booster do you have a stable green led or flickering green led to indicate transmission, thanks
I would assume that something isn't soldered properly. I myself have already soldered some directly to the chip because the conductor tracks had burned away by then.
Hey buddy brilliant video. Can you tell me how you fit the transducer inside a bait boat. Does it need water to work like a deeper which would mean cutting a hole in the boat?
Hey friend thank you for your videos they are really helpful I have a question do you also shorten the lenght of the sonar transducer and if so can you show us how to do that?
Hallo Das mit dem Kabel Kürzen kann ich mal zeigen wenn ich noch mal eins machen . Das kann man aber auch relativ einfach Ausmessen mit einem Durchgangsprüfer.
Wie viele Meter kannst du segeln? Liebe Grüße Leon
Leuk dat je weer wat geplaats
Did you solder behind the resistor or in front the picture is not clear, and on the booster do you have a stable green led or flickering green led to indicate transmission, thanks
Ich löte vor dem Wiederstand. Und ja meinen grüne LED Blinkt wie es üblich ist bei Datenübertragung.
@@MrFlykcl thank you mate, you’ve been a big help, 👍🏻
thanx for this video! i did the same thing, but nog it shows no more wifi, do i always need a repeater? or did i broke the wifi chip? 😅
I would assume that something isn't soldered properly. I myself have already soldered some directly to the chip because the conductor tracks had burned away by then.
Hey buddy brilliant video. Can you tell me how you fit the transducer inside a bait boat. Does it need water to work like a deeper which would mean cutting a hole in the boat?
Hi . no, you can also stick the transmitter in the fuselage without air bubbles. you don't have to make a hole
@@MrFlykcl thx for the info buddy 👍👍
@@MrFlykcl you mean with silicone ?
Moin. Was für eine Reichweite kann man damit erzielen?
Hey friend thank you for your videos they are really helpful
I have a question do you also shorten the lenght of the sonar transducer and if so can you show us how to do that?
Hallo
Das mit dem Kabel Kürzen kann ich mal zeigen wenn ich noch mal eins machen . Das kann man aber auch relativ einfach Ausmessen mit einem Durchgangsprüfer.
@@MrFlykcl yes please !! I would love to.
Hi what repeater do you use with the booster thank you
@@MrFlykclzeig es mir auch! nach dem durchtrennen des kabels haben sich die echolotwerte nicht verändert ???
@@alekseyzemskov058 nein das macht keine Probleme. Habe kein Unterschied bemerkt.
Sagen Sie mir die Größe des Echolot-Chips selbst ??? Danke
2 mal 2 cm
Was würde denn so ein Kästchen kosten
Einfach mal per E-Mail melden