2021 + Bronco Roof Mounted LED Bar Installation (From F150LEDs.com)

Nick shows the step-by-step process to install the F150LEDs 210w LED bar on the roof of your Ford Bronco! This bar is is extremely bright and will turn the night into day in front of you even in the darkest conditions. The F150LEDs 210w LED bar will be sure to make you Stand Out and Shine Brighter and you can check it out at F150LEDs.com as well as all of our other amazing LED technology for your Ford Bronco!
Order Your 210w Roof Mounted LED Bar Here! www.f150leds.c...
=============================
=============================
Connect With Us!
Website: www.f150leds.com/
Instagram: / f150leds
Facebook: / f150leds
Twitter: / f150leds
=============================

[@raytushoski4918]

if you are going to use silicone , here's trick to keep your line really clean. #1 Run your bead of silicone(You don't need a 1/2 wide strip of it...3/16th works. After your have put down your bead take a spray-bottle , filled with Water and give the whole area a good spritz so your whole work area is covered..No, NOT 15 gallons...just enough to give the area some moisture...Now use your finger( I use my pinky because I've got thick ass crippled fingers) and push you finger down firmly and follow the path of your silicone...The silicone will stick to the are that wasn't wet but will come off on the wet area so there is no need to clean up afterwards. Cured or even wet silicone SUCKS to have to clean up...I promise you will be happy you did it this way. Side tip---This works for plumbing silicone or even caulk . your end product will look much cleaner! Hope it helps at least one of u.

[@AnarchyThirtySeven]

Such a clean look compared to other light bars.

[@F150LEDs]

Thanks David! Please let us know how we can help, we look foward to serving you soon!

[@williamthorpe3948]

Id be nice to get a video of how to wire these up the aux switches before i go a cutting and stripping wires.

[@F150LEDs]

Hi there! We show hooking up to the AUX switches right at the 8 minute mark of this video. Please let us know if that helps! We look forward to serving you soon!

[@shotguner2465]

Would I still need to hook the harness to batt+ even if I were to hook it to the aux switch?

[@lkneezel]

I bought a light bar already but i like the mounts you used to put my painted covers back on top of the brackets, where can I buy just those brackets ?

[@F150LEDs]

Thank you! Please reach out to our support team directly so they can get your info and get you taken care of!
We look forward to serving you soon!
www.f150leds.com/pages/contact-us

[@deidrepaez5263]

Any recommendations for the whistling?

[@F150LEDs]

Hey Deidre! Slight angle adjustments to your bars position can make a big difference in how the air flows and can greatly reduce any type of wind noise. You also want to ensure the air foils are positioned correctly. Thanks for your support!

[@nicclub7439]

There are any way to pass the wire from the bar directly throughout mount area to the pre-wired (wildtrack and above) designed ? Thank YOU

[@F150LEDs]

Hey Nicclub! Yes you can certianly use the prewired option if your Bronco is so equipped! Our video just shows how everyone can do it regardless of trim level =). Please let us know if we can help further, we look foward to serving you soon!

[@swooshdave]

Wildtrack and above? Upfitter switches are available on most trims as an option.

[@williamthorpe3948]

Bought this bar, got the harness all cut to wire into aux switches and this bar is loud, wind noise is unbearably loud, anyone have an ideas or fixes for this?

[@F150LEDs]

Hey William! There are a few things that can lead to increased wind noise, such as mounting orientation and pitch. Please reach our to our support team and they can walk you through it! Looking foward to serving you soon, thank you for your support! www.f150leds.com/pages/contact-us

[@clipvue222]

Wosh there was one for the 2023 f150

[@F150LEDs]

Thanks ClipVue! Drilling through the roof on the F150 etc can be problematic! We do have other options for your 23 however!
www.f150leds.com/collections/2021-f150/products/2021-f150-paladin-180w-curved-cree-xte-led-bumper-bar

[@JK4fam2008]

My boss just gave me some mirror lights and a light bar cause he couldn’t return to you guys. Catch is I have a 93 Silverado, will it work with some fabrication?

[@F150LEDs]

Absolutely! Enjoy the lights!

[@Switzerr]

What’s that bracket called or where can I get it that had the color matched panel attached to??

[@F150LEDs]

Hi there! Our 210W CREE roof bar re-uses the factory roof mount bracket covers. You can find that here:
www.f150leds.com/collections/2021-ford-bronco/products/ford-bronco-roof-mounted-paladin-210w-curved-cree-xte-led-bar
the 270W roof bar does not utilize the color caps.
www.f150leds.com/collections/2021-ford-bronco/products/2021-2023-ford-bronco-roof-mounted-paladin-270w-curved-cree-xte-led-bar
Please let us know how we can serve you further!

[@stevengonzalez6917]

Will this work with the OEM roof rack?

[@F150LEDs]

Hey there @stevengonzalez6917! They work fantastic with the short roof racks but if you are using a full size rack that already occupies the RTM roof mounts over the windshield then you would need to mount the bar directly to your rack. Please let us know how we can serve further!

[@Hunter-vd1gr]

always sold out

[@F150LEDs]

Hey Hunter! Due to high demand we do occasionally have to mark things out of stock but you should be able to place your order for the Bronco LED roof bar now!
Please let us know if you are still having any trouble ordering or if there is another product in particular we can assist you with!
We are excited to serve you!