Make sure the direction of the LEDs are 9 and 3 o'clock or your spread is going to be all wrong. The cable should be at the 12 o'clock position. Your video showed it in the bottom somewhere, it fits that way but the spread is going to be wrong. Not sure if you fixed it afterwards. Hope this helps! These lights are definitely an upgrade over stock.... Huge upgrade and well worth the $30 if they last. Thx.
Yes that is correct, I fixed the rotation afterwards as the beam was all messed up. Mine are still going strong with no issues. So for $30 I’d say it was a win and definite upgrade.
I tried just turning the wheel and pulling the wheel well back but I still didn't have enough room. I came to watch the video on taking the front bumper off and started wondering of taking the wheel off completely would work better. Then bam, I see your video. Thank you!!
Great video instructions. I was wondering, did you keep the anti-flicker capacitor hanging out or kept it inside the headlamp? I'm afraid if I keep it inside it's gets too hot and create a problem. Thanks for response
Guys please remember,all cars are made for different countries and and there are differences on them,head lights and DRL will always differ,some got fog lights and sonme dont,some got leather on the same trim amd some dont,some got sunroofs and some dont. So it is all to do with different countries models sold.
If you make a video putting led strips on a Hyundai Elantra headlight like that on the chrome edges you will get a lot of people happy lol, every Hyundai Elantra owner in the us complains about the chrome trim edges, I’d love to know how to put led there
Thanks for the video. I'm not even sure how Hyundai could sell a car without a real high beam light. When you turn on the high beams with the factory bulbs it turns a flap and the only way you can notice the change if when you less than a foot away from a white car or wall otherwise you would never know.. does the LED make that any different?
Finally got my bulbs changed, thank you so much. Now, ion know if I did the angle right or what ever spread stuff y’all were talking about, but I guess I’ll find out
I’m from Canada and winter here can be dangerous especially driving at night and having an option for yellowish light when it’s snowing hard is a must.
i just got a 2020 Hyundai Elantra value edition so far it’s a good car but when i took a road trip with family they like the car the drive was long so we switched drivers every couple hours and everyone who drove my car noticed at night the lights are not so bright my car is brand new so its not like it’s used so are these lights u put on for high beams to or just the regular lights
Thanks for your very informative video. You cut through all the crap. I used to like Hyundai but it's ridiculous that you have to go through so much just to replace the front left headlamp. Can't those geniuses come up with a better design? They just want to make it harder on us so we'll feel compelled to get the dealer to do it.
I completely agree with you, they are trying to make it so us do it ourselves people have a hard time or find it to frustrating and take it to the dealer and get scammed. Thanks for checking out the video and I appreciate the comments.
I went to my dealer and they told me they don’t do changes to headlights! That is the worse light I’ve ever seen on a brand new car, even older cars use LED, cheap Hyundai engineers!
I looked and these are currently unavailable for some reason. I was wondering if you have any favorites, I have to replace my high and low beams, they’re way too dim. I need something really bright
Wanted to say i was able to order and install the H7s but it took a lot of craft. Firstly for a 19 Hyundai GT, you will need to pull the bumper off and remove the housing. No other possibility of removing and replacing the headlight retaining wire. 2nd. My OEM headlight was damaged and required me to purchase and install an OEM replacement… however the Original on the vehicle is projector headlights and the replacement OEM is reflector. (This was an issue as the LES was perfect in the reflector however in the original HL the plug was different and required me to cut all the plastic off that holds the bulb in place. Lastly I again have 1 projector and 1 reflector headlight both OEM. I have to attempt to fix the reflector beam pattern as its about half way short of projector beam.
@@HQGARAGE honestly i love being able to work on cars as a hobby. (Little secret no one will tell you, if you work for AAA theres no training. You learn the clerical aspect but the rest is all youtube.) But yes anyways, looks good need to fix a few things but your video helped.
What’s the model of your Elantra? Mines a 2020 SEL and those white LED strips on the headlights are just a shiny chrome surface. I’m just trying to source some of those that you got instead!
I have a 2020 elantra that had the LH turn signal torn out. Where does the pigtail tie into the wire harness, I can't find it anywhere as the lens, connector and wire are gone. Please help, I'm desperate and can't pass inspection because of this. Much appreciated
Man you are so right!! I Had an Altima SR, sunset orange 2019. It had beautiful bright LED lights. I traded it for a 2022 Elantra N-Line. I was not even thinking about the headlamps as the deal went down before it got dark. I left in the dark And noticed right away…”WTF, Hyundai!” Those yellow halogen are absolutely shit! I am changing them tomorrow as well as interior yellow ugly ass hurt my eyes lights.
Hey, i got the sealight hb3 led bulbs for my Elantra 2019 but the electrical unit at the end thats fits into the power dont fit into each other i wonder why because i got the HB3 which is recommended on the user manual. Any tips what can be done since I have already got them
On the passenger side, my daytime running lights (the white light around the 3 bulbs) is half on. I’m not sure if a particular bulb needs to be replaced or if I have a more serious issue. Any ideas? Please help asap. On your video at 1:51, the angel eyes light up on both sides for reference.
Did you test how the light is coming out from the projector it seems on the beam that is separated on two sides (up and down from the projector housing) and this can bother other incoming drivers and not focusing on the street.
Yes there is an adjustment on the bulb itself to to ensure the leds are in the correct orientation so the light is emitted correctly on the path of the vehicle rather than randomly all over the place.
I don’t know if my engine is slightly different somehow (2017 Elantra SE sedan, US-built) but I had no problem swapping-out the regular low-beam bulb for the suggested LED one on the driver’s side headlight. Kinda sucked because I wasted a good hour fiddling around with the wheel well liner and it’s various screws and fasteners in an effort to peel it back, but in the end, it was totally not necessary AND I then had to button everything back up! Doh!! That said, this video DID help quite a bit, and I was very pleased with the quality of the LED headlights you linked to!
Any tips on getting a dust cover that won’t seem to budge off? I’ve been trying the method of using a screw driver and all that’s done is tear the thing up. I have a 2017 and I can’t get the stupid thing to even slightly move. This goes for both dust caps on both of the low beams. I was able to easily get the high beam ones off though.
Yep..oil filter wrench would be my suggestion too..about $10..well worth the investment. Ive used mine for many different things...pool equipment knuckle, head light dust cover, kitchen sink plumbing..etc.
@@HQGARAGE oh wow I need to find some them because mine dont have that but they look so good especially on a white car. My Elantra is the maroon color one
Hey man, I just picked up a 2020 Hyundai Elantra SEL, same headlights, EXCEPT how did you get the silver trim to be a LED strip???! I don't like the silver trim on inside headlamp and didn't understand why they didn't make it a LED strip...sooo how did you get this or do it?! Haha
so like I got the right bulbs it’s just that the plug thingys that your supposed to connected don’t even fit wtf ): any suggestions? Might just have to order new ones again
Taking the wheel off is not a big deal and well worth the comfort and accuracy. I mean, you could attempt to do the whole job blindfolded, and it could be done... but why not make things easy
I clicked on your link for the 9005 LED bulbs and Amazon keeps telling me these won't fit my 2019 Hyundai Elantra SEL. Please tell me Amazon's lying to me, cuz I don't feel like having to return them.
Hello HQ_GARAGE I recently upgraded my headlights to my 2019 Elantra to LED they’re awesome thanks for informative video👍I have a question for you did you change your DTR lights??😀
I was actually able to get the bulbs in and our without all that other work. Driver side was a very very tight fit. My hand now looks like I got in a fight with a cat.
@@HQGARAGE Yeah definitely better for a video. I messed up the bulb the first time when I was putting it back in so had to buy another. It went way faster the second time.
Can someone help answer these questions… i ordered a 9005. The highbeam is on the inside and the lowbeam is on the outside. But when hooked up the 9005 didnt work. I was trying on the inside light. Maybe? Idk i returned and picked up an H7 but now that doesnt seem to make sense before getting into it. Just looking for answers as im confused now
@@HQGARAGE because whats also weird, i actually have a headlight assembly because i was sent 2 by accident. So i have one so I can actually see what it looks like perfectly. The 9005 i had would not be able to fit on the outside. The highbeam is almost like a wall plug connector
Whats the name of the headlight lamp where the Stripe lights up? Like the ones in the video the ones on my car are a solid Silver and I also see a Elantra in my town driving around with them too and I really want them lol
With further reading the comments, His headlights came like that? is it a different trim level I am assuming? Like I said, My head light that design is a just a solid silver piece and not an actual light like his.
It is basically the base model so I am not sure why my lights have the LED strip but all the eleantras I have seen around town all have the same headlights?
@@HQGARAGE Thats so weird lol, All of them I see here in my town doesnt have the LED strip except one guy thats driving around. I have a Black elantra and I think those would look super clean on mine, Ive been searching google and Ebay for them and cannot find a single one. Your very lucky! lol
Hey buddy, how do I fix the flap that redirects the beam to a high beam? I can't figure out how to get it repaired and electrician said if opening the Plastic casing might not be able to seal it nice back again @hq_garage
You can open up the headlight by putting the headlight in the oven at 170 degrees for 10mins. This will soften the adhesive enough to split it apart. You can then buy the proper adhesive to reseal the lense after the flap is fixed.
@@HQGARAGE thanks. also. do you know if it works as both low beam and high beam. i search that both use the same 9005. but not sure if it works for both. and will the cap close back ok? i see the end is somewhat longer at the end from the photos.
Hey man !! Hi 5 from Puerto Rico 🇵🇷. Love the video very simple U went directly to the heart. My question this bulp works high & low beams? Just as the original ones from factory
@@HQGARAGE bro got tell you!!! I did just as you said and got them thru the link U provide using your vid I install them and man the are awesome and gives the car another look... thanks 😊 🙏
I have a 2020 Elantra, has anyone else noticed that when using the link to purchase these specific headlamps that it says they do not fit this vehicle? I just bought the Sylvania zXe gold bulbs in store for now, but plan to convert to LED headlamps and DRL. I read that in some cases you have to have something programmed for the LEDs to work on these cars, as anyone ran into this issue? Thanks!
When I ordered the bulbs they said they did not fit the vehicle as well. But they definitely fit and do not require and programming or anything else to make them work. They are still in my car and going strong.
@@HQGARAGE awesome! Thank you, I will be ordering for both my Elantra and my husbands sonata. I will admit I didn’t watch your video to the end before replacing my bulbs after about 20 minutes of trying to remove the bulbs i learned taking the inner fender guard loose was much easier, I’ve learned my lesson and will watch until the end from here on out. though next time I may consider removing my wheels. Thanks for the informative video!
I think the yellow lights looked fine, although it would still be nice if they were warm white LEDs. I'm not convinced I need bluer lights. Isn't blue light supposedly going to mess with my circadian rhythm? I'd rather just leave the lights as yellow.
I also believe it not so much about color as it is about light output, the new led lights produce a much better and brighter light for visibility and safety
I’m not too sure to be honest, I imagine if you went to someone who specializes in modifying headlights they could probably help with ordering them or even retrofitting your OEM lights
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
Make sure the direction of the LEDs are 9 and 3 o'clock or your spread is going to be all wrong. The cable should be at the 12 o'clock position. Your video showed it in the bottom somewhere, it fits that way but the spread is going to be wrong. Not sure if you fixed it afterwards. Hope this helps! These lights are definitely an upgrade over stock.... Huge upgrade and well worth the $30 if they last. Thx.
Yes that is correct, I fixed the rotation afterwards as the beam was all messed up. Mine are still going strong with no issues. So for $30 I’d say it was a win and definite upgrade.
@@HQGARAGE thanks for confirming!
Pleaae pin this comment from Crystal. That should help others as well. Btw best video ever.
Pinned 👍🏻
@@HQGARAGE Is this as in one side is angled to 9 and the other at 3? Driver 9 and passenger 3? Thanks for any help.
What a tight squeeze to take out/put back the bulb on the driver side low beam headlight. Thank you for your tutorial, it really helped, brother.
My pleasure 🙏 it’s the least I could do
Hi. Can you please tell me if these are used for high beam as well for this elantra. Thankss
I tried just turning the wheel and pulling the wheel well back but I still didn't have enough room. I came to watch the video on taking the front bumper off and started wondering of taking the wheel off completely would work better. Then bam, I see your video. Thank you!!
My pleasure. Glad I could be of some help.
Hi did they fit in with that fan which comes in-built?
Please reply thanks.. I have a 2017 Elantra.
Just bought this car today saw the lights were dingy came here thanks for the tips I already ordered 👍🏼
Congrats on you new purchase 🙌🙌🙌
Are low beams and high beams one?
Do I need to buy 4 LEDs? Please let me know
Mine is the same bulb for both.
Great video instructions. I was wondering, did you keep the anti-flicker capacitor hanging out or kept it inside the headlamp?
I'm afraid if I keep it inside it's gets too hot and create a problem. Thanks for response
I kept everything inside the housing and haven’t had any issues.
Guys please remember,all cars are made for different countries and and there are differences on them,head lights and DRL will always differ,some got fog lights and sonme dont,some got leather on the same trim amd some dont,some got sunroofs and some dont.
So it is all to do with different countries models sold.
Thanks that was much better than taking the whole bumper off. Thanks for the great suggestion.
My pleasure, glad to be able to help.
Needed to change the daytime running lights, but this video came up. So I changed the wrong lights. But happy I did.
How did you get the edges of the headlights to light up as well? I can’t find a part that has led around the edges like yours does.
That’s OEM from the factory
If you make a video putting led strips on a Hyundai Elantra headlight like that on the chrome edges you will get a lot of people happy lol, every Hyundai Elantra owner in the us complains about the chrome trim edges, I’d love to know how to put led there
Where do I get that LED headlight assembly trim mine is the basic and I would love that led trim added to my car
Thanks for the video. I'm not even sure how Hyundai could sell a car without a real high beam light. When you turn on the high beams with the factory bulbs it turns a flap and the only way you can notice the change if when you less than a foot away from a white car or wall otherwise you would never know.. does the LED make that any different?
I agree the factory lights are brutal, the LED bulbs make quite the difference especially out on the highway at night.
I've got mine done and working like a charm. Great price for great bulbs. Thanks for the video it helped alot
That’s fantastic and glad it was helpful. That’s all I could ask for.
Was there much room in the cover to hide the wires?..or pretty tight?
No there is quite a bit of room to hide the wires
Somehow pulled out the driver side and put a new one in, a miracle
Same my hands aren't too large lol I was able to twist em both out
The guy at AutoZone was able to change the driver side bulb right under the hood. It wasn't easy but he did it. The passenger side was a breeze.
Finally got my bulbs changed, thank you so much. Now, ion know if I did the angle right or what ever spread stuff y’all were talking about, but I guess I’ll find out
Just one question before ordering. Can someone tell me if these leds are used for high beam as well? I have the same elantra. Thanks!!
Hyundai's are thankfully made in Korea. Thanks 4 the video man.
Chevrolet (US) Ford (US) Chrysler (Diamler Germany) have Canadian plants as well as Hyundai (South Korea) & Toyota (Japan).
Hi. May i know if the led trim in the headlight is repairable or replaceable?
I am not sure 🤔 to be honest. It might have to be replaced with a new headlight.
I’m from Canada and winter here can be dangerous especially driving at night and having an option for yellowish light when it’s snowing hard is a must.
i just got a 2020 Hyundai Elantra value edition so far it’s a good car but when i took a road trip with family they like the car the drive was long so we switched drivers every couple hours and everyone who drove my car noticed at night the lights are not so bright my car is brand new so its not like it’s used so are these lights u put on for high beams to or just the regular lights
These are for the regular lights but also do the high beams as well. I would highly recommend making the upgrade especially for your safety.
Thanks for your very informative video. You cut through all the crap. I used to like Hyundai but it's ridiculous that you have to go through so much just to replace the front left headlamp. Can't those geniuses come up with a better design? They just want to make it harder on us so we'll feel compelled to get the dealer to do it.
I completely agree with you, they are trying to make it so us do it ourselves people have a hard time or find it to frustrating and take it to the dealer and get scammed. Thanks for checking out the video and I appreciate the comments.
I went to my dealer and they told me they don’t do changes to headlights! That is the worse light I’ve ever seen on a brand new car, even older cars use LED, cheap Hyundai engineers!
Anything to save a buck
I looked and these are currently unavailable for some reason. I was wondering if you have any favorites, I have to replace my high and low beams, they’re way too dim. I need something really bright
I did mine with your instructions and it was smooth, thank you.
My Pleasure and thank you for the feedback
Great video I have the same headlights but my one of my DRLs died do you have the part number of the headlights?
So i have the elantra 2020 doesnt have that led line light where i can find that headlight? Thanks nice video
Where do I get the headlight assembly! Mine has silver in place of your LED light bar, I've been looking everywhere and can't find them!
I have seen them on eBay and Amazon
What is the headlight assembly you are using, my 2020 Elantra doesn’t have the LED trim
How've they held up over the past two years? Have any went out or flickered? Thank you!!
Still going strong 💪🏻 no issues as of yet and still impressed with the light output
Wanted to say i was able to order and install the H7s but it took a lot of craft. Firstly for a 19 Hyundai GT, you will need to pull the bumper off and remove the housing. No other possibility of removing and replacing the headlight retaining wire.
2nd. My OEM headlight was damaged and required me to purchase and install an OEM replacement… however the Original on the vehicle is projector headlights and the replacement OEM is reflector. (This was an issue as the LES was perfect in the reflector however in the original HL the plug was different and required me to cut all the plastic off that holds the bulb in place.
Lastly I again have 1 projector and 1 reflector headlight both OEM. I have to attempt to fix the reflector beam pattern as its about half way short of projector beam.
I am sorry you had such a challenge with your headlight change. Sounds like it was a pain but hopefully you will enjoy the upgraded lighting
@@HQGARAGE honestly i love being able to work on cars as a hobby. (Little secret no one will tell you, if you work for AAA theres no training. You learn the clerical aspect but the rest is all youtube.)
But yes anyways, looks good need to fix a few things but your video helped.
What’s the model of your Elantra? Mines a 2020 SEL and those white LED strips on the headlights are just a shiny chrome surface. I’m just trying to source some of those that you got instead!
I have found them on eBay and Amazon
Any links? I’m trying to get those led strips as well
i have a Hyundai elantra value edition i want this exact headlight assembly from the sport and limited, can i get these lights and put on my VE?
Awesome video. I don't have the garage therefore would I be able to remove the wheel liners by turning the wheels in ?
Yes I believe you can do that by turning the wheel and reaching in there. I took the wheel off so it was easier to film what I was doing 👍🏻
@@HQGARAGE did these without removing the panels. Was not easy.... So far so good, going to test them out tonight!!!
Sweet nice job 👍🏻
I have a 2020 elantra that had the LH turn signal torn out. Where does the pigtail tie into the wire harness, I can't find it anywhere as the lens, connector and wire are gone. Please help, I'm desperate and can't pass inspection because of this. Much appreciated
I am not too sure but I can see if I can dig into and see what I can find.
Awesome video. Just and FYI, your Amazon link to the bulbs is not working.
Thanks for letting me know, I have updated it.
What model is this? I have the sel but my strips don't light up on the headlights.
It’s the Canadian SE model
Man you are so right!! I
Had an Altima SR, sunset orange 2019. It had beautiful bright LED lights. I traded it for a 2022 Elantra N-Line. I was not even thinking about the headlamps as the deal went down before it got dark. I left in the dark
And noticed right away…”WTF, Hyundai!” Those yellow halogen are absolutely shit! I am changing them tomorrow as well as interior yellow ugly ass hurt my eyes lights.
Yup they have done so many things very well but completely missed the mark with the lighting.
Those headlights are oem or replacement?
They are OEM
Hey, i got the sealight hb3 led bulbs for my Elantra 2019 but the electrical unit at the end thats fits into the power dont fit into each other i wonder why because i got the HB3 which is recommended on the user manual. Any tips what can be done since I have already got them
I think they make an adaptor to go from the car plug to the HB3’s
Does it have to be Canbus bulb?I have the generation before this one
Mine wasn’t a canbus bulb 💡
@@HQGARAGE so they didn't flicker or give u an error on the dash
On the passenger side, my daytime running lights (the white light around the 3 bulbs) is half on. I’m not sure if a particular bulb needs to be replaced or if I have a more serious issue. Any ideas? Please help asap. On your video at 1:51, the angel eyes light up on both sides for reference.
Did you test how the light is coming out from the projector it seems on the beam that is separated on two sides (up and down from the projector housing) and this can bother other incoming drivers and not focusing on the street.
Yes there is an adjustment on the bulb itself to to ensure the leds are in the correct orientation so the light is emitted correctly on the path of the vehicle rather than randomly all over the place.
You didn't mention what to do with the extra cable, hiw do you reinstall the dust cap?
I just tucked it all into the headlight area and installed it all as you removed it.
Thanks for your Video, great instruction and to the point. Thanks again
Thank you 🙏
I don’t know if my engine is slightly different somehow (2017 Elantra SE sedan, US-built) but I had no problem swapping-out the regular low-beam bulb for the suggested LED one on the driver’s side headlight. Kinda sucked because I wasted a good hour fiddling around with the wheel well liner and it’s various screws and fasteners in an effort to peel it back, but in the end, it was totally not necessary AND I then had to button everything back up! Doh!! That said, this video DID help quite a bit, and I was very pleased with the quality of the LED headlights you linked to!
Are these high and low beams and do they throw a error code?
Yes they are for the high and low beams. Nope they do not throw a code or warning
“BRIGHT LIGHTS! BRIGHT LIGHTS!” The entire headlight looks so much better with that 6000k upgrade 👍🏼
I completely agree with you. Thanks Man 🙏🙏🙏
@HQ_GARAGE
Do you know if for the 2019 Elantra SE if these are all you need for the high and low beams? Are high and low both in this one bulb? Thanks
Yes you only need 1 bulb for both low beam and high beam for your Elantra
@@HQGARAGE Thanks so much I’m going to try to do this myself!
You got this 👍🏻
@@HQGARAGE Can you get white LED’s for the DRL’s also?
I do believe so
On the 2020 Elantra...how much room is behind the light cover to hide the new led bulb wires? Will it fit or should i buy the extended rubber covers?
Lots of room behind the covers. No need to buy extended rubber covers.
@@HQGARAGE great..ty
Does these work with Hyndai Elantra AD facelift 2020? Thanks!
I do believe so
Any tips on getting a dust cover that won’t seem to budge off? I’ve been trying the method of using a screw driver and all that’s done is tear the thing up. I have a 2017 and I can’t get the stupid thing to even slightly move. This goes for both dust caps on both of the low beams. I was able to easily get the high beam ones off though.
The only thing I can think of is try an oil filter wrench or maybe some pipe wrench pliers to grab a hold of it.
Yep..oil filter wrench would be my suggestion too..about $10..well worth the investment. Ive used mine for many different things...pool equipment knuckle, head light dust cover, kitchen sink plumbing..etc.
Apparently they can also be used to loosen a stubborn oil filter too..lol
That’s a great idea and it definitely has a lot of uses.
Lol 😂
Where did you get that led strip on your head light? Mines just a chrome finish
That is a factory headlight. Most of them here in Canada all have them.
Are these leds used for the high beam as well? Will really appreciate if you reply. Thanks
Yes you are correct. The one bulb is used for both low and high beams
@@HQGARAGE Thankyou. Much appreciated 👍
I thought yiu needed some sort of conversion kit to use leds eith a halogen car?
Definitely not
I’m want the head light assembly with the strip light. How can I get them please?
I found them on Amazon
amzn.to/3connmi
My LED strip light went out on the driver side Have you replaced yours?
Thankfully I have not had to have one replaced yet
Are the led strips stock or did you add those to the vehicle?
They are stock
@@HQGARAGE oh wow I need to find some them because mine dont have that but they look so good especially on a white car. My Elantra is the maroon color one
My 2019 Elantra led DRL are not working. Is there a way to fix them
What model is your Elantra? I like the LED light on the sides like the one in the sport mode, where did you get it?
It is a 2020 Elantra preferred model. They come standard here in Canada. They are one of my fav features.
Confused here, on my 2020 SE Elantra is the high and low just a 9005 with a glare lense or something
That is correct, when you switch your high beams on it moves a lense to create the high beam.
Hey man, I just picked up a 2020 Hyundai Elantra SEL, same headlights, EXCEPT how did you get the silver trim to be a LED strip???! I don't like the silver trim on inside headlamp and didn't understand why they didn't make it a LED strip...sooo how did you get this or do it?! Haha
My Elantra came standard with the LED strip. Not sure if it’s a Canada option or specific option but I can tell you it’s factory
@@HQGARAGE USA is always somehow getting the cheap version 🤣 I wonder if I'm able to purchase those from Canada to here?
I wonder if that’s a possibility
so like I got the right bulbs it’s just that the plug thingys that your supposed to connected don’t even fit wtf ): any suggestions? Might just have to order new ones again
I would confirm in your owners manual on the correct bulb style and verify it with the bulbs in the box.
How long do they last ?
Well we are over a year now and still going strong.
Do these come stock with the Daytime LED light strip on the headlights?
Yes that is the stock Daytime LED strips even on the base model like mine.
@@HQGARAGE where did you get it because mines doesn’t have those white daytime LED lights
I got it from a Hyundai dealership in Calgary Alberta Canada.
Are low beams and high beams same place 🤔?
Will this work with a 2020 Elantra Limited model?
Yup 👍🏻
I have a 2018. My question is the long wire attached to the bulb where do I lead that to because the original assembly doesn’t come with it.
Long wire attached to the new bulb?
@@HQGARAGE yes that one. Do I just coil it behind the bulb?
Yes that is correct
Did you install the high beam headlight as well?
My model uses the same bulb for the low beams and high beams.
Just reaching out to see how they are holding up so far? Looking to do this to mine also
They have been great 😊 still going strong and don’t get flashed with high beams or any issues.
@@HQGARAGE what’s odd is that Amazon says it doesn’t fit my vehicle but I have the same as you. 2020
Yup mine said the same thing but yet they clearly fit.
Hey man! Do you think these are the same bulbs for the 2021 hyundai elantra?
I’m not sure but I can definitely look into that and let you know
Did you ever find out?
Hi my elantra headlight led strip went yellow any advice
Do you know where I can get the running led head lights ? I have a 2019 Elantra SEL been trying to upgrade the whole headlamps
I will look into this and get back to you.
I have found these ones on eBay www.ebay.ca/itm/324455688494
How do you exactly take the bulb out.
Type of custom headlights your using? I would love to put those on my Elantra! 🤙🏻
I am just using the factory headlights with aftermarket bulbs. The links in the description
Excellent Vid! Did you ever find out whether these fit in the 2021 Elantra model?
Thank you and yes these fit in the 2021 model. 👍🏻👍🏻👍🏻
No, the 2021 already come with LEDS
Depends on the model of Elantra
You don't have to take the wheel offer peel back in the fender liner it could be done.
You are absolutely 100 percent correct. I took it all off for the purpose of being able to record it as a video.
Taking the wheel off is not a big deal and well worth the comfort and accuracy. I mean, you could attempt to do the whole job blindfolded, and it could be done... but why not make things easy
I clicked on your link for the 9005 LED bulbs and Amazon keeps telling me these won't fit my 2019 Hyundai Elantra SEL. Please tell me Amazon's lying to me, cuz I don't feel like having to return them.
Amazon is lying to you, it said the same thing to me but I can say they are still installed in the car and working brilliantly.
does this work for 2019 Elantra gt hatchback?
Just letting you know, HID are suited for the low beam projector lense, LED for the high beam reflector housing
Except in the manual it says that HID bulbs may interfere with the vehicles automotive system.
Having a hard time getting the connectors loose. Does anyone have any suggestions for me to try ?
Hello HQ_GARAGE I recently upgraded my headlights to my 2019 Elantra to LED they’re awesome thanks for informative video👍I have a question for you did you change your DTR lights??😀
Thank you for the kind words, no I have not changed my DTR lights
You’re welcome and Thank you for the fast response👍
hello i was wondering where do i find a 2019 elantra led headlight?
Hi, how we can adjust the lights?
I was actually able to get the bulbs in and our without all that other work. Driver side was a very very tight fit. My hand now looks like I got in a fight with a cat.
Yup I can believe that. It definitely it doable without removing anything but it sure made it easier especially for video purposes.
@@HQGARAGE Yeah definitely better for a video.
I messed up the bulb the first time when I was putting it back in so had to buy another. It went way faster the second time.
Dan’s that sucks but glad you got it all figured out.
Can someone help answer these questions… i ordered a 9005. The highbeam is on the inside and the lowbeam is on the outside. But when hooked up the 9005 didnt work. I was trying on the inside light. Maybe? Idk i returned and picked up an H7 but now that doesnt seem to make sense before getting into it. Just looking for answers as im confused now
What year is your Car? Where are you located?
@@HQGARAGE 2019 GT. Texas. US.
@@HQGARAGE because whats also weird, i actually have a headlight assembly because i was sent 2 by accident. So i have one so I can actually see what it looks like perfectly. The 9005 i had would not be able to fit on the outside. The highbeam is almost like a wall plug connector
You need an H7 for your bulb
amzn.to/3m4ofRW
Whats the name of the headlight lamp where the Stripe lights up? Like the ones in the video the ones on my car are a solid Silver and I also see a Elantra in my town driving around with them too and I really want them lol
With further reading the comments, His headlights came like that? is it a different trim level I am assuming? Like I said, My head light that design is a just a solid silver piece and not an actual light like his.
It is basically the base model so I am not sure why my lights have the LED strip but all the eleantras I have seen around town all have the same headlights?
@@HQGARAGE Thats so weird lol, All of them I see here in my town doesnt have the LED strip except one guy thats driving around. I have a Black elantra and I think those would look super clean on mine, Ive been searching google and Ebay for them and cannot find a single one. Your very lucky! lol
I have found the entire headlight assembly on eBay before but not just the led strips.
Hey buddy, how do I fix the flap that redirects the beam to a high beam? I can't figure out how to get it repaired and electrician said if opening the Plastic casing might not be able to seal it nice back again @hq_garage
You can open up the headlight by putting the headlight in the oven at 170 degrees for 10mins. This will soften the adhesive enough to split it apart. You can then buy the proper adhesive to reseal the lense after the flap is fixed.
Will this work for 2019 Elantra and will it give errors? Thanks
Yes it will and no it will not give any errors
@@HQGARAGE okay thank you for a fast response :))
No Problem 👌👌
Have you changed your high beams?
Mine just has the 1 bulb for both low and high beams
How would i go about also replacing the DRL?
Like the LED Strip?
The drl LED is part of the headlight assembly. You'd have to buy a new one if it's not working. Not sure about earlier models though
What about the high beams any recommendations where I can buy those
If you have the same model the high beams use the same bulb for the high beams
i gotta 2017 i’m gonna try this same light bulb on both FUKDAHATERS
Which Elantra model is this?
2020 Elantra SE
I order them for my 2016 and they didn’t fit it’s there an universal plug or so for them ??
The plug for the wiring didn’t fit or the bulb didn’t fit in the housing?
The plug for the wiring
How did you get the headlamps to light up on the edges
Those are factory leds
@@HQGARAGE what year? And trim model?
@scottesparza2028 it’s a 2020 SE Canadian model
Guys I need help!! Are low beams and high beams one?
They are in my 2020 Elantra
can these be fitted for both low and high beams for a 2019 elantra?
I would double check the numbers on the bulbs but other than that I would say so.
hi. i went to the amazon page and it say this doesnt fit 2020 elantra. does this really fit? not sure if yours is 2019 or 2020 but its the same front.
Mine is a 2020 and it said it didn’t fit but I promise you it does 👍
@@HQGARAGE thanks. also. do you know if it works as both low beam and high beam. i search that both use the same 9005. but not sure if it works for both. and will the cap close back ok? i see the end is somewhat longer at the end from the photos.
Yes it works for the low beam and high beam. The cap closes without an issue.
Can you make one for the 2018 sonata please?
If I had a Sonata to use as a template I probably could 🤔🤔🤔
is it possible to do this without removing wheel?
Yup just turn your wheel to one side and reach in.
Hey man !! Hi 5 from Puerto Rico 🇵🇷. Love the video very simple U went directly to the heart. My question this bulp works high & low beams? Just as the original ones from factory
Hey 👋 thank you for the comment. Yes the bulb works for both just like the original bulbs do from factory.
@@HQGARAGE bro got tell you!!! I did just as you said and got them thru the link U provide using your vid I install them and man the are awesome and gives the car another look... thanks 😊 🙏
Yaaasssss that’s so awesome. 👏👏 I appreciate the feedback and am happy your happy with how it turned out.
Do you have any tips for whats out there for reverse led lights on the same vehicle with high LM 6000K very bright
Let me take a look and get back to you
I have a 2020 Elantra, has anyone else noticed that when using the link to purchase these specific headlamps that it says they do not fit this vehicle? I just bought the Sylvania zXe gold bulbs in store for now, but plan to convert to LED headlamps and DRL. I read that in some cases you have to have something programmed for the LEDs to work on these cars, as anyone ran into this issue? Thanks!
When I ordered the bulbs they said they did not fit the vehicle as well. But they definitely fit and do not require and programming or anything else to make them work. They are still in my car and going strong.
@@HQGARAGE awesome! Thank you, I will be ordering for both my Elantra and my husbands sonata. I will admit I didn’t watch your video to the end before replacing my bulbs after about 20 minutes of trying to remove the bulbs i learned taking the inner fender guard loose was much easier, I’ve learned my lesson and will watch until the end from here on out. though next time I may consider removing my wheels. Thanks for the informative video!
What year are them headlights cause mine don’t light up
Mine is a 2020 base model
Me too 2020
So what type of headlight do I look for or is there a plug to go to them
For some reason the Canadian cars came with the led headlights like mine
So is there any place I can order them
I think the yellow lights looked fine, although it would still be nice if they were warm white LEDs. I'm not convinced I need bluer lights. Isn't blue light supposedly going to mess with my circadian rhythm? I'd rather just leave the lights as yellow.
I also believe it not so much about color as it is about light output, the new led lights produce a much better and brighter light for visibility and safety
You can choose the color temp. 60000 temp is a pure white with no blue. 35000 to 50K has blue, more with the lower temp. Below 30K goes purple too.
Is there any way to order the led line that is on that headlight assembly
I’m not too sure to be honest, I imagine if you went to someone who specializes in modifying headlights they could probably help with ordering them or even retrofitting your OEM lights