Good luck with the motor. Can't wait to see what you get out of it. The shim job I did on my Thunder worked pretty well. I'm waiting on some ultra thin washer to finish up the cvds.
Should be a great combo! Look forward to seeing it run! No worries on the. Motor mount. I ran a 3650 4600kv in the HBX a today and it was stupid!!!! 60+ mph wheelie!😂
@@RCrepairAndBuilds so nice of you!!! I was only able to hit 64 today because the truck wanted to go into a low earth orbit! I’m thinking the stock motor with taller gearing as a much better solution. 🤣. I may be with Tom or gearing the 3650 will have a little less torque… But probably will still have way too much.
@@DedicationRC any decent ESC that's 4s compatible! I personally use these, both work well and I haven't had any issue's! VBESTLIFE Brushless Motor and ESC... www.amazon.com/dp/B0BRH6TTZV?ref=ppx_pop_mob_ap_share GoolRC 120A Brushless ESC with... www.amazon.com/dp/B0C5J11L76?ref=ppx_pop_mob_ap_share GoolRC also offers a 150a that I run in my dedicated speed run truck. Anything over 4s and the stock driveline will break but you can upgrade using this place here scorchedparts.co.uk/
@@DedicationRC spur has held up fine, If the mesh is right you won't have any spur gear problems until you're well over 70mph, my slipper exploded at 77.23mph. I'm running well over 65 mph right now with my "mid grade" Thunder, stock plastic spur gear. My dedicated speed run truck had a modified traxxas slipper clutch in it.
Good good stuff, man! I always look forward to your upload buddy. Get up with you soon about sending my thunder to you.
No fears always appreciate all your content and the basis of why you're doing what you're doing keep up the good work Buddy😊😊😊
Good luck with the motor. Can't wait to see what you get out of it. The shim job I did on my Thunder worked pretty well. I'm waiting on some ultra thin washer to finish up the cvds.
@@wingtyrant thanks for watching
Great content we shouldn’t sleep on Amazon rc lol
Should be a great combo! Look forward to seeing it run!
No worries on the. Motor mount. I ran a 3650 4600kv in the HBX a today and it was stupid!!!! 60+ mph wheelie!😂
@@BriansRCStuff 🤣😅 the HBX! What a little beast, well, I have mine back. Bentley liked the Thunder better so I helped the kid out.
@@RCrepairAndBuilds so nice of you!!!
I was only able to hit 64 today because the truck wanted to go into a low earth orbit!
I’m thinking the stock motor with taller gearing as a much better solution. 🤣. I may be with Tom or gearing the 3650 will have a little less torque… But probably will still have way too much.
Just got mine in!! I didn't expect it to be a true 1/10th honestly if it's not, it's right on the line between my redcat blackout and granite
@@DedicationRC it is definitely a true 1/10 scale. For the money you can't beat this RC. Hope you enjoy it, thanks for stopping by
I just ordered one due to your videos. It's 96 bucks right now with coupon
@@DedicationRC thanks for watching, you'll enjoy it, it's a great truck
Great deal!
My shaft just broke on me yesterday just when I was doing a 27t speed run smh. I have a 4300 3650 can I'm putting it in as we speak
@@da6thmane094 keep us updated, which shaft broke? The motor?
@@RCrepairAndBuilds yep the motor shaft snapped and I was just checking my mesh
And there replacement motor is $75... definitely not paying that
@@da6thmane094 get yourself a GoolRc, I haven't had 1 failure, not yet anyway.
What all do I need to do to run 4s and it be durable enough to take it?
@@DedicationRC any decent ESC that's 4s compatible! I personally use these, both work well and I haven't had any issue's!
VBESTLIFE Brushless Motor and ESC... www.amazon.com/dp/B0BRH6TTZV?ref=ppx_pop_mob_ap_share
GoolRC 120A Brushless ESC with... www.amazon.com/dp/B0C5J11L76?ref=ppx_pop_mob_ap_share
GoolRC also offers a 150a that I run in my dedicated speed run truck. Anything over 4s and the stock driveline will break but you can upgrade using this place here
scorchedparts.co.uk/
@@RCrepairAndBuilds the spur held up?
@@DedicationRC spur has held up fine, If the mesh is right you won't have any spur gear problems until you're well over 70mph, my slipper exploded at 77.23mph. I'm running well over 65 mph right now with my "mid grade" Thunder, stock plastic spur gear. My dedicated speed run truck had a modified traxxas slipper clutch in it.
@@RCrepairAndBuilds thanks man!!