Harvey , you are looking and sounding like a million bucks !! Always makes my day to see a new video. Keep it up my friend, we are all thrilled to see your content, you are a pro !!!!
@IndianaDoug Just to chime-in where I wasn't invited, I believe it was .003" of piston clearance and .008 of ring gap... if that makes a difference in your comment? Again, not arguing, just trying to learn.
@@HayChaffandSawdust1ha ha, no worries at all. Do you think Harvey has .03” on both sides of the piston? Or .03” total? That would be the question. I had a 395 with that much and it slapped like grannie hearing you cuss for the first time.
@@IndianaDoug THAT'S some serious slappin"!! I was talking with him earlier and I understood it to be 0.003 total as we were discussing whether it was enough or if it would cold seize with the cast sleeve; also discussing the ~.007 ring gap as plenty small. He may jump in and straighten us (me) out if I misunderstood. ...speakin' of slappin" 😉😉
Good to see you back 🔧🔧 I would like.002-.0025 more but long as isn't over .003 probably be fine anymore could rock a bit and wear out fast. .012-.014 for ring gap with piston that size.
Good to hear your feeling better. Hope to see you riding dirt bikes on your videos soon. That inspires me to get back into off road riding. I miss my Honda 1984 XL600R. Been thinking about buying a new XR650L
Good deal harvy I didn't ever noticed you lived so close to me a bunch of my buddies know you Jeremy ordaway and Brandon the work on the piwerl8nes your building a 100cc saw for Jerry he was telling me also you guys made a video up at my buddy's camp in Hartsville Shane McKinleys I live over hill from you in andover I've been watching you for like 3 or 4 years I never put 2 and 2 together until few months ago lol
Yea it just seemed held back with the hd12 carb. That or the standard air filter setup holding back air flow. Or a combination of both. . Ether way cool build.
Very good info, sir! Came in from mowing hay to cool off with a .... uh... a "beverage" and was happy to see you had posted another video to accompany the wobble pop!! She looks like she still cranks over plenty stiff... but doable.
Not been watching for very long but I couldn't help but wonder if you were still doing this stuff. Glad to hear that you are getting stronger. I have enjoyed watching and learning. I am not really a chainsaw guy more into large scale rc 2 stroke engines. I believe a lot of this should also pertain to rc engines. Learning to port from your videos.
I had a couple 365 specials I used for fire wood. Great little saws. Must be sweet at 90 cc!!! Nice job Harvey. You look good bud. Glad you’re feeling well.
Hello from Renovo PA .... Great to see you back in action....l hope that you are feeling better can't wait to see what kind of things that you came up with to do while you were recovering .... looking forward to seeing your videos....stay safe, stay healthy and keep the sawdust flying .
Glad to hear you are feeling better Harvey, that's a relief to hear! Health & family 1st; video content as you want. have missed your content, but I can certainly wait patiently until your next video is posted. Be well Mr. Ironhorse!
Nice to see your doing well harv. Can a 288 husq work on a chainsaw mill? Or does it get to hot? I pulled apart a 288 for a fellow who ran it on a mill and the ring was welded to the piston on the exhaust side.
I'm glad your back I was really getting into that build I'm glad you are sharing your knowledge with us it's interesting to see what you make a saw do then watching buckin billy ray run your saw I'm like wow man he's good and ro share the wisdom and things you do I appreciate that
Got rained out today in NH. I am sitting in the soft chair next to the wood stove listening to commonsense from the Iron Hours. Don’t get better than this. We go racing next Saturday
Truly good to see and here you are feeling better. Thank you for taking the time to video your builds. We are blessed you are sharing your 40 plus years of experience. And you are simply entertaining to watch. Thanks again!
That thing sounds amazing man! Way to go, Ironhorse mastery at its finest! Talk about the ultimate sleeper! Well if it didn't have the ironhorse sticker, it would be a sleeper...WITH the ironhorse sticker it automatically tells people it's something crazy enough to have your sticker on it! Glad to see your doing better big dog!!!!
You are back to looking healthy again. You can see the difference in your face and the energy you give off. A lot more like the Harvey from a few years ago. I had some things going on in my life for awhile that just made me put my hobbies and my TH-cam watching on hold for a couple years (no not prison, lol) and when I came back to it that’s when you were really having the worst of your health problems and it was really hard to see you go through that after all you’ve given to all of us. It’s just really good to see you doing better. Use that better health for whatever you want to do whether that’s being here for all of us or not. You’ve given so much that you deserve whatever it is that you want now. Take care.
Sunday morning breakfast with uncle Harvey, cheers from NZ
Couldn't hardly sleep wanting to hear that saw run!
Harvey , you are looking and sounding like a million bucks !!
Always makes my day to see a new video. Keep it up my friend, we are all thrilled to see your content, you are a pro !!!!
Love your videos thank you.
Good to see ya looking better Harvey. She gonna be a beast
I’d say you might get some piston slap with only one ring at .08”
@IndianaDoug Just to chime-in where I wasn't invited, I believe it was .003" of piston clearance and .008 of ring gap... if that makes a difference in your comment? Again, not arguing, just trying to learn.
@@HayChaffandSawdust1ha ha, no worries at all. Do you think Harvey has .03” on both sides of the piston? Or .03” total? That would be the question. I had a 395 with that much and it slapped like grannie hearing you cuss for the first time.
@@IndianaDoug THAT'S some serious slappin"!! I was talking with him earlier and I understood it to be 0.003 total as we were discussing whether it was enough or if it would cold seize with the cast sleeve; also discussing the ~.007 ring gap as plenty small. He may jump in and straighten us (me) out if I misunderstood. ...speakin' of slappin" 😉😉
Harvey, always a good day, when you publish a video 🛐👌
Thank you for taking time to show us this build
That's a nice motor. Looks great
I SAW LITTLE JETS OF FLAME FROM THE EXHAUST...A GOOD SIGN!
Awesome video Harvey
Hey Harv.looking good. So glad to see you in the saw shop. Going to be a great year now that you are back.
👍
I cut the section off the intake that the impulse runs through so I can rotate the boot and have the carb sit properly.
sounds good harv!!
So does is sound like a stihl?
you definitely seem so much better , its a relief to see
Good to see you back 🔧🔧 I would like.002-.0025 more but long as isn't over .003 probably be fine anymore could rock a bit and wear out fast. .012-.014 for ring gap with piston that size.
I literally put my 390xp together with a 58mm hyway big bore 2 weeks ago
Sure is great to have ya back on the tube Harve! Be sure to take care of yourself so we can keep taking advantage of your content and company.
Good to hear your feeling better. Hope to see you riding dirt bikes on your videos soon. That inspires me to get back into off road riding. I miss my Honda 1984 XL600R. Been thinking about buying a new XR650L
Hi
Harvey... looking good!
Good deal harvy I didn't ever noticed you lived so close to me a bunch of my buddies know you Jeremy ordaway and Brandon the work on the piwerl8nes your building a 100cc saw for Jerry he was telling me also you guys made a video up at my buddy's camp in Hartsville Shane McKinleys I live over hill from you in andover I've been watching you for like 3 or 4 years I never put 2 and 2 together until few months ago lol
Yea it just seemed held back with the hd12 carb.
That or the standard air filter setup holding back air flow.
Or a combination of both.
.
Ether way cool build.
Cut the part off the boot the I mpulse goes through and you can spin the boot around so the carb sets straight
Very good info, sir! Came in from mowing hay to cool off with a .... uh... a "beverage" and was happy to see you had posted another video to accompany the wobble pop!! She looks like she still cranks over plenty stiff... but doable.
Good to see
Geez Harvey glad you’re doing well. Dave went through AFib it was rough.
Your saws speak for themselves. Custom raw power . Beautiful Harvey. Only one HD they broke the mould .
Howdy Mr Harvy,good stuff as always ways,you are a ensawclopedia for sure,!!pleasure!! Sierra John
Not been watching for very long but I couldn't help but wonder if you were still doing this stuff. Glad to hear that you are getting stronger. I have enjoyed watching and learning. I am not really a chainsaw guy more into large scale rc 2 stroke engines. I believe a lot of this should also pertain to rc engines. Learning to port from your videos.
Always enjoy hearing from ya Harvey. Hello from Camp Point Illinois!
Glad to see your doing well, that piston fixture would be interesting to see how you built it.
Hell yeah Harvey
Wow this is the kind of stuff that I find fascinating awesome stuff Harvey
Saya juga punya mesin husqvarna 365 sayangnya sudah tua. Tapi meskipun sudah tua tapi masih bisa buat memotong kayu bakar.
Great to see your doing well, and able to put up some new content.
Enjoy watching your videos, Harvey
Glad you're back in tha shop! I have been learning alot watching your videos and hope to see many more.
Konten nya sangat menarik. Tapi saya tidak mengerti apa yang anda jelaskan. Apa mesin husqvarna 365 itu bisa lebih besar tenaganya dari standar ?
You’re looking good Harvey!! Honestly, you look 10 years younger!!! Keep at it. Health is Wealth!!
Awesome job Harvey!!!
Ironhorse was my first subscription ever back when you were building the 372 dominant saw for buckinstock
So glad to see you back in the shop. Hope you and Family are doin well🙏.
Wow you're looking good Harv. Nice job buddy!
Good to see you back hope your still filling good and try to stay that way your still a young fellow
It's great to see you back building and teaching 👍
You can get the red carb sleeves at HL supply OE Husqvarna. That is sweet build. Thanks for sharing all your experience.
Hey nice to see the iron house looking good god bless
I had a couple 365 specials I used for fire wood. Great little saws. Must be sweet at 90 cc!!! Nice job Harvey. You look good bud. Glad you’re feeling well.
Glad you're feeling better.
The 365 X-TORQ saw do indeed have the low top filter with the staggered mounting holes
God Bless, thank you for another instalment.
That's funny my father says the same thing about DOT officers. If you can't dazzle them with brilliance baffle them with bullshit.
Glad to see you happy and in better health Mr ironhorse. 🎉
Hi ironhorse you should bring some saws to the kreiner Loomis engine show in South Plymouth n.y. June 28-30 free primitive camping
Always great to see you having fun in the shop
Hello from Renovo PA .... Great to see you back in action....l hope that you are feeling better can't wait to see what kind of things that you came up with to do while you were recovering .... looking forward to seeing your videos....stay safe, stay healthy and keep the sawdust flying .
Harvey your the best
I like how you think out the box on your builds . Thanks for sharing your knowledge buddy it's been fun applying your ideas to my builds .
Glad to hear you are feeling better Harvey, that's a relief to hear! Health & family 1st; video content as you want. have missed your content, but I can certainly wait patiently until your next video is posted. Be well Mr. Ironhorse!
That saw sounds good Harvey! I'm glad to see that you're starting to feel better!
Glad you're back, really missed you uncle Harv !
hope you feel better everyday. Life is fun when you feel good. Best wishes from Oregon
Ironhorse! I'm so happy to see you back at it!
That weisco piston is around $200 Harvey I bought one for a project that I was working on three years ago and they were $180 then
Heah Harv, Great Vid, but where do you get those Alloy throttle cable adaptors?
Yay Ironhorse!...🫡👍🤙🏽
Nice to see your doing well harv.
Can a 288 husq work on a chainsaw mill? Or does it get to hot? I pulled apart a 288 for a fellow who ran it on a mill and the ring was welded to the piston on the exhaust side.
We love having you back here Harvey would love to see some more pip builds and my be some plans for them 😁😁
Mr.Harve its great seeing you back i dont ever comment i learn a lot by watching you work your magic on those saws
How are you using 066 piston when the wrist pin is a different size than the 372 ??
I'm glad your back I was really getting into that build I'm glad you are sharing your knowledge with us it's interesting to see what you make a saw do then watching buckin billy ray run your saw I'm like wow man he's good and ro share the wisdom and things you do I appreciate that
sweet.. it's a runner! I'd vote a strong .009
They do make saw pistons , have for years that’s who dominant used :-) just so you know Buddy
Harvey I use the xtorq carbs they work great
Keep them videos coming Harv, I know its a lot of work to make them when life is busy but it’s good seeing you
I'm loving the content Harv, good to see you.
It tickles my heart to see you back at doing your magic on chainsaws. 😎👍
Good to see you back and the shop cat too 👍🏼 what happened to the original iron cat?
Harvey I cut the rubber piece off that the impulse goes through and twist the boot one way or the other so the carb sits like it should,
Good to see you back in the shop harv!! Cannot wait to see this saw in wood👌👌❤️🇦🇺
Hey Ironhorse, great to see you feeling better! I love the videos keep up the good work.
We missed you like nothing else
Got rained out today in NH. I am sitting in the soft chair next to the wood stove listening to commonsense from the Iron Hours. Don’t get better than this. We go racing next Saturday
I love ur videos and God bless you and get well soon
Needs a muffler job?
Glad to see you back!
Great to see you sir. Be safe and be careful
Truly good to see and here you are feeling better. Thank you for taking the time to video your builds.
We are blessed you are sharing your 40 plus years of experience. And you are simply entertaining to watch. Thanks again!
Sounds good 👍
nice video
Take it to a race or put it on the dyno
Thanks to Erik for the nice 365..that sounds like a ring zinger...good to see you & Cullen...miss you boy's 👍👍☺☺
Thank you Harv for being you , you’re simply the best ! Gods gift to all of us , we truly are blessed to have you !!!You’ve taught me so much !
That thing sounds amazing man! Way to go, Ironhorse mastery at its finest! Talk about the ultimate sleeper! Well if it didn't have the ironhorse sticker, it would be a sleeper...WITH the ironhorse sticker it automatically tells people it's something crazy enough to have your sticker on it! Glad to see your doing better big dog!!!!
You are back to looking healthy again. You can see the difference in your face and the energy you give off. A lot more like the Harvey from a few years ago. I had some things going on in my life for awhile that just made me put my hobbies and my TH-cam watching on hold for a couple years (no not prison, lol) and when I came back to it that’s when you were really having the worst of your health problems and it was really hard to see you go through that after all you’ve given to all of us. It’s just really good to see you doing better. Use that better health for whatever you want to do whether that’s being here for all of us or not. You’ve given so much that you deserve whatever it is that you want now. Take care.
It's good to see you back and doing well.
365 to a 390 what a cool build.
WE all love you IRONHORSE:)
i was worried for u ! im so relieved u doing at least ok ! love you from sweden