I don’t think you should switch to DJI vtx it is super expensive walksnail would be the better option the goggles are also cheaper. Loved the video keep it up ❤.
@@DronePH-2024 I'm planning on building my first drone ever with this frame. Using the same speedybee stuff. I've been practicing on a simulator with my Xbox controller. Going to get a radiomaster pocket first then save up to get parts for the drone
Awesome video just got the 3" what stack are you using. Was gling to get the flyfish 1404 4500kv but those zing 1404 look good as well. Ill be putting a walksnail into it. Definitely will be following this video once i get all the components. Dan✌️
Speedybee F4 mini 35A 20x20 stack brother, yap ill try a bigger battery on it and still motors are so good All the components can see on description thanks for watching happy flying👍
I'm currently building a 3.5 with 1804, planning to use a 4s 660mah HV it came up to 236g full analog The VTX used in your 3.5 might be too heavy with the casing
@@DronePH-2024 thanks 👍👍 ive seen the 3.5 volador is only 3g heavier than the 3" volador atleast according to their website. i dont think its worth then going down to 3" if u only have like 3 grams difference
@@DronePH-2024 The heck? 10 minutes? You sure? In this case I need to build this copter myself. How is the feeling compared to the 3.5''? Is it significantly different or nearly the same?
@@DronePH-2024 sir, favor naman, baka pwede pasukat ng frame Arm length ng volador 3inch mo, just want to check if my iflight motor wires will fit.. Thanks in advance.
Thank you, very nice video!
Thanks brother appreciate it👍👍👍
@@DronePH-2024 Hey, are you planing to crate a new video about SimuDrone. It has been updated and changed a lot.
@@goktur yap brother I will coming next👍
Sweet build!
@@joshthebuilder247 thanks brother appreciate it👍
Pare. Very nice build. Can we request for betaflight configuration and set up ?
Thanks
@@reefer2168 ok brother next video I will make thanks
Take a see to frame diatone roma L3, It weights 20 grams less... And you can Carry a 859 or 1050 battery
Dont worry brother i will build also that frame this build is only for review thanks happy flying👍👍👍
Hello, can you please make a frame comparison between the VX3 and VX3.5 like lengths and height then the weight?
@@desmondkristian9033 ok brother i will make it for you👍
I don’t think you should switch to DJI vtx it is super expensive walksnail would be the better option the goggles are also cheaper. Loved the video keep it up ❤.
@@KajAngenent thanks for your opinion brother happy flying👍
@@KajAngenent I saw the walksnail goggles for 200. I'm going to build the same thing analog, planning on later going with walksnail moonlight setup.
Built my O3 version. That came to 249g as well.
@@ha-media that's great brother happy flying 👍
Nice video in your FPV Journey
@@nitronut1723 thanks brother appreciate it happy flying👍👍👍
Could save a few grams by taking off the go pro mount
@@douglascarlson9712 yap brother your right 👍 thanks for watching
@@DronePH-2024 I'm planning on building my first drone ever with this frame. Using the same speedybee stuff. I've been practicing on a simulator with my Xbox controller. Going to get a radiomaster pocket first then save up to get parts for the drone
Thanks & fully subscribed with alerts ..
Thanks brother appreciate it to much happy flying👍
I trink i am going to build this 😊
@@EjentoX great brother happy flying
Nice I love it
Thanks brother appreciate it. BETAFPV Pavo 25 build coming next happy flying👍👍👍
@@DronePH-2024 nice ice just finished a 4s FlyLens 85
@@squaddingquads great brother enjoy👍
🙌👍👍👍 thank you
Thanks to brother👍
Very cool..nice video😊
Thanks brother👍
Which Batterie Charger would you recommend
@@EjentoX I'm using this one brother and great👉
a.aliexpress.com/_ExFo81F
Awesome video just got the 3" what stack are you using. Was gling to get the flyfish 1404 4500kv but those zing 1404 look good as well. Ill be putting a walksnail into it. Definitely will be following this video once i get all the components. Dan✌️
Speedybee F4 mini 35A 20x20 stack brother, yap ill try a bigger battery on it and still motors are so good All the components can see on description thanks for watching happy flying👍
Thanks man.👊
how long ft ?
Nice I love it I will build also like this❤
Thank u will not regret with this quad happy flying👍
Really appreciate your hard work. Is this an X frame? I dont want the props in the vision of the o3.
Thanks brother yes brother Vx3.👍
@@DronePH-2024 Can you recommend a Dead Cat frame then in the 3 Inch segment with same FC. I plan to use DJI o3 on it.
@@dronefilmsgermany you can try the Diatone Roma L3 3 inch frame brother lightweight and low price around 28 USD I think👍
Info about the props???
Gemfan 3016 Propeller 1.5m 2mm hole 3 inch 3-Blade CW CCW FPV Propeller Mini Props For 3inch FPV Racing Drone
a.aliexpress.com/_EvPWuSh
@@DronePH-2024 THX
can we get your cli dump file? I'm doing this build with a vista.
I'm currently building a 3.5 with 1804, planning to use a 4s 660mah HV it came up to 236g full analog
The VTX used in your 3.5 might be too heavy with the casing
Did you use volador 3.5 inch frame bro and flash motor great if you build sub 250 with that👍
Yes
CADDXFPV Baby Ratel2
FlyFishRC Volador VX3
Flysfish Flash 1804
HGLRC Zeus nano
Foxeer Lollipop micro UFL
20x20mm SpeedyBee F405
Gemfan 3520
Jumper 2.4GHz ExpressLRS ELRS AION-RX-Nano
@@takiparilimpossivel You wrote Volador VX3, but you meant VX3.5 right?
@@kratzeni correct
did your frame come with vtx mounting hardware? mine did not
Mine to brother don't have just got some of my hardware before on my old FPV thanks happy flying👉👉👉
do u have a video where u fly this quad?
@@papajero4074 this brother👉 th-cam.com/video/Y03kjqrYR7U/w-d-xo.htmlsi=0fvuz7l3ccUMrcO2
@@papajero4074 👉th-cam.com/video/uBDw2ZhJ46k/w-d-xo.htmlsi=NhalCXA5FF1n4PZP
@@DronePH-2024 thanks 👍👍 ive seen the 3.5 volador is only 3g heavier than the 3" volador atleast according to their website. i dont think its worth then going down to 3" if u only have like 3 grams difference
@@papajero4074 for Sub250 brother go to 3 inch 650 mah battery happy flying
how long does it fly with the sub 250 Battery?
Around 10 minutes brother thanks
@@DronePH-2024 The heck? 10 minutes? You sure? In this case I need to build this copter myself.
How is the feeling compared to the 3.5''?
Is it significantly different or nearly the same?
will the iflght Xing 1404 5500kv motors be compatible with this volador 3inch frame?
1404 5500kv yes it's compatible brother but if 1440 I'm not sure thank you👍
@@DronePH-2024 thanks for confirming, actually bro, i. I'm planning to put my Protek25 electronics to volador 3inch frame..
@@Quad8ightMix volador frame bro is a great frame and durable happy flying👍
@@DronePH-2024 sorry bro from the typo error, yes its. 1404 iflght stock motors of protek25
@@DronePH-2024 sir, favor naman, baka pwede pasukat ng frame Arm length ng volador 3inch mo, just want to check if my iflight motor wires will fit.. Thanks in advance.
Bro how far the older 3.5 inch drone will fly
Honestly brother I did not try it for full range just fly for freestyle around 200m and never disconnected i use only my 3.5 about 3 times 👍
👍
Thanks for watching happy flying👍
Kabayan
Kabayan kumusta👍
Bossing PM mo ako if you want to sell the 3.5 size Volador.
Sayang nga boss Kung nasa pinas Lang ako bigay kona sayo to👍
Haha! Yes!
Sayang nga malayo talaga dian.
Enjoy mo talaga ang pag build nang quad.
@@ChaddyFPV yaan mo boss pag natuloy ako bakasyon this year my ibibigay ako sayo👍
Salamat Bossing!
In advance Hehe!
@@DronePH-2024 Boss pede magpaturo sa pag built planning ren po mag build ng analog fpv set. meron na po rc. drone at googles na lang kulang ko.
Neutron give me de do please😢