Fine battery. As long as don't go below 50v, it's a fine battery. My batteries are two years plus. They work as it's it day in day out. Out of my 6 batteries, I had one battery who had two bad cell after using 1+years. Just out of warranty, two cells went bad.
@@Kyaw_Lin You are doing at your own risk & may void warranty. For longest battery life span, Still recommended to charge at lower rates. Under Page 3 "Param". Get a reading from the battery first. Then find what you what to change, click at the value and change it. After click on write to update battery.
Hi sir, If you could help me i will appreciate that, i don't have this your usb to Ethernet,i have found usb to ethernet card that used in internet connection but it doesn't work with bms narada, i had searched for this issue in internet and i tried several configuration of connection for ethernet cable (straight and crossover) ....but can't find the right solution, please help me
There is basically two issues to be solve to connect to the battery. 1. You must have either the module for RS-232 or RS-485. During connection you must select the right communication type RS232 or RS485. 2. If this you have tried and you still can't connect. Then this version of software doesn't work with the Narnada Battery BMS. You will have to approach Narada to get the exact version for your battery. I also have two battery that doesn't works with this software. Another two battery keep disconnected but still can read parameters.
RS-232 is using RJ11 telephone cable 6 line. Using leg 2 computer side sent, leg 3 computer side receive. RS-485 is using RJ45 networking cable. Using leg 2 for RS485_A and leg 3 for RS485_B. I am using orange line for A on module and green white line for B on module.
I have replied to all software request yesterday. If you have not received the links by Wetransfer, please check you firewall or spam filter. The email link from Wetransfer might have been filter into spam. If you have checked and not there, then sent me another email request.
Hello Michael, I requested the program by mail, I am writing to you from Chile. Thank you so much
hola conseguiste el programa estoy en las mismas
Thanks my friend ❤
What us your openion about narada LFP cell. Is it good
Fine battery. As long as don't go below 50v, it's a fine battery. My batteries are two years plus. They work as it's it day in day out.
Out of my 6 batteries, I had one battery who had two bad cell after using 1+years. Just out of warranty, two cells went bad.
Please share with me the BMS tool I have emailed you just now
please can you share the bms software?
Please can I get a copy of the BMS software please. I need to see what is happening to a battery I have
Hello sir, please i need the monitoring application only , no nedd to change any thing, can you please send it
Please share the BMS software .thanks
Hi can you send me a copy of the software? can you send a link where you bought the usb dongle and cable pinout instruction also?
Thank you Mr Michael
My battery show me this error COMM_Over_Time_Locked .. what should i do?
No idea.
Please share the BMS software
I need a way to connect to Eve 48v battery pack
I have never own or use a Eve battery. Sorry
I have bought NaradaNPFC100 which is 51.2V100ah . It only charges at 10A current . Can I change that charge limitation through this BMS software ?
Yes you can but at your own risk.
Hello sir , I have sent you a mail . Can you share me the software ? Thanks
hi bro . Change 20A Current is ok?
@@michaelseah9617 how to change 10A charger current to 20A current.
@@Kyaw_Lin You are doing at your own risk & may void warranty. For longest battery life span, Still recommended to charge at lower rates.
Under Page 3 "Param". Get a reading from the battery first. Then find what you what to change, click at the value and change it. After click on write to update battery.
Hi Sir, an email for software send to you last weak please share
Please send me the program of narada lithium
Hola podrias conpartir
can You share the software please
Your email.
can you provide me the BMS software ?
I am traveling now. Another 10 days I will be back.
@@michaelseah9617 can you now share it with me
Hi sir,
If you could help me i will appreciate that, i don't have this your usb to Ethernet,i have found usb to ethernet card that used in internet connection but it doesn't work with bms narada, i had searched for this issue in internet and i tried several configuration of connection for ethernet cable (straight and crossover) ....but can't find the right solution, please help me
There is basically two issues to be solve to connect to the battery.
1. You must have either the module for RS-232 or RS-485. During connection you must select the right communication type RS232 or RS485.
2. If this you have tried and you still can't connect. Then this version of software doesn't work with the Narnada Battery BMS. You will have to approach Narada to get the exact version for your battery.
I also have two battery that doesn't works with this software. Another two battery keep disconnected but still can read parameters.
RS-232 is using RJ11 telephone cable 6 line. Using leg 2 computer side sent, leg 3 computer side receive.
RS-485 is using RJ45 networking cable. Using leg 2 for RS485_A and leg 3 for RS485_B. I am using orange line for A on module and green white line for B on module.
@@michaelseah9617 hi sir
I had sent you a mail . Can you share me the software ? Thanks
Hello to All Need software who have please share it i have sent request since last month but till now no reply please help needed
Hello. Can you send me the software please. I sent you a email.
I had sent you in your email last 3 weeks
I have probably sent you the software already. It's by wetransfer. Check your email for the links.
@@michaelseah9617 ...I was sent in your email...reply please for Narada BMS Tool
I have replied to all software request yesterday. If you have not received the links by Wetransfer, please check you firewall or spam filter. The email link from Wetransfer might have been filter into spam.
If you have checked and not there, then sent me another email request.
@@michaelseah9617 ...no other link or file into spam Sir......I was checked
@@khinmaunghtwe-mt9db sent me another request email.
Hi sir, I have sent you an email
Could you please share the tool? Can I have your gmail please?
Sent me email at surfer18@gmail.com. I sent out the links by batches.
@@michaelseah9617 I have sent an email, please check your email soon, hope to hear from you
@@michaelseah9617 hep?
@@chatcctvquang7547 give me your email.
@@chatcctvquang7547 I have sent you the BMS software by wetransfer.
can You share the software please