The thing I love about you is your pushing against the boundaries of design. Is it a stool or is it art or is it both? Does it matter? To me it reinforces the fact you're an Artisan.
Nice piece; though the thought of the vertical spring steel support sliding up through the stool seat brings tears to my eyes. I know this can’t happen but the thought won’t go away.
At the risk of inciting a hate crime, I'm dying to know what you did with the mold...and if it's for sale. (I can't be the only one who thought about this...and if I am, I still wanna know!) I just watched a string of your fantastically edited videos, and of all the very apparent, enviable qualities you possess, it's your craftsmanship I call chief among them. To be creative is one thing, to be skilled is another, to share any of it is rare, to do it all so well even more so, and to look like that while doing it all...almost criminal. I bet you got as many haters as you do fans...but I ask you, is there really much difference? haha. Above all else, it's apparent you've spent a lot of time loving these things you do. I know I'm just another comment from the proverbial peanut gallery, but for what it's worth, it looks like you are living a damn good life. In all seriousness, I find it incredibly inspiring. Newest subscriber/fan right here!
Loose the haters, you have skills and you know what you are doing. Another video that I enjoyed watching, thanks for taking the time working on such project and filming/editing it.
Good work, I would have holed, and threaded the rods in the middle (at a 60degree angle sothat it would be easier to install the M6 set screw） instead of just relying on epoxy resin to hold the weight.
I don't feel like the epoxy for the support onto the seat to the legs was a good idea cuz what if you end up wiggling the epoxy loose and support goes up your butt not joking this could be serious
This is a really cool project. Did you weld a washer into the top of the tube that holds the spring steel rods? If the epoxy fails we are going to have to nickname you Vlad.
the way you twist your arm around by that bandsaw 😆 just epic...you almost made it look like it was twisting your arm...you make fascinating things! SUBSCRIBED!!😄
Fart safe stool :D Jokes aside, I just subscribed after watching the fusion table video. This are for sure inspiring contents: great design, clever use of different materials and excellent executions. Thanks for sharing.
I thaught the same. The Epoxy or what else he used to glue the sticks in the pipe, will sometimes get loose and then the seat move down with all his bodyweight, while the rods sticking up his ass or somewhere else.
This guy is a breath of fresh creative air. How he just works around ideas is just mind blowing.
Thanks Tony, you comment makes my morning Coffee even sweeter and keeps me motivated for the day🙏
Let's hope pole mount doesn't fail
My thoughts exactly. Should have welded on a big washer onto the leg that is bigger than the holes as s fail safe
Farts pass right through.
Yer, but it might sound like a pan flute.
@@RadioSnivins 😂😂😂😂
You are putting a lot of faith in that epoxy.
The guy is mostly doing conceptual/art pieces, so I would not expect any of them to last in utilitarian/commential setting.
8:11
Would be one hell of a surprise if that epoxy let go.....
The thing I love about you is your pushing against the boundaries of design. Is it a stool or is it art or is it both? Does it matter? To me it reinforces the fact you're an Artisan.
listen to what i tell you, this channel is going to be in top 5 in the diy community on youtube
Keep them comming. Very fun to "see" your mind at work!
I see such negative comments... 👎
Myself I see another great German craftsman doing his job on what he loves. Great Job man...👍.👍.👍
Необычно. дизайнерская мебель. Лайк 👍
2:15 - I definitely laughed out loud when you started drilling the hole between the cheeks. 🤣
I laughed even more when he shoved the pipe into it.
Nice piece; though the thought of the vertical spring steel support sliding up through the stool seat brings tears to my eyes. I know this can’t happen but the thought won’t go away.
Exactly! "Rectum? Damn near killed Him!``...kept going through my mind while viewing, for that precise reason.
Yes exactly ,why not simply use the same attachment methode he used below... much more safe.
Clearly the Rolls Royce of tractor seats! Awesome work, Sir. Thank you for sharing!
Such a curious peace of furniture!
I really like it, thank you for sharing!!
You're kinda super smart and gifted it's amazing
It's a very creative idea and very well done. Just a note: I have nightmares imagining the possibility that the epoxy resin fails...
Sculptor of repute.Many thanks for sharing your immense talent.
Fantastic design, I will be making my own with one caveat, welding the center post. 😬 Subscribed!
Capping the center pipe is a must. I could not sit on such a thing without clenching. Just looking at it is uncomfortable.
@@kistuszek lol! Exactly my thoughts. I love the design though.
Awesome build!
man this is so bloody cool, a great project so nicely done, cheers for sharing
You are so inspiring! Thanks! Great piece of Work!
And the saw flip wins the subscription! It looked slick.
I like your 360° body turn grinding technique
Great job! It looks super and awesome entertainment factor too! You managed to turn repetitive actions into a very enjoyable video!
what happens when that epoxy breaks with the weight and gets forced upwards ...
Harry Christie exactly what I was thinking lol
You know welding, you know forging, you know carpenter. what a talent inside you
Hai davvero tanta fantasia, molte capacità manuali e soprattutto la pazienza per realizzare i capolavori che inventi: i miei più vivi complimenti !!
Главное чтобы эбокситная смола от трубки не отошла, а то неприятно будет)))
What a ton of work! Each piece custom cut. Great job!
A dab of epoxy stopping two steel spikes from making you into a Turkish starter dish? Hmmm....
makes for great ventilation!
If that epoxy ever gives out... 😮
The "assholes" chair. Or the "enema 2000" if the glue ever fails haha
Enema 2000!
So much ouch!
Never heard of A$$ casting before...Love it!
Если использовать трубки разной длинны, то при искусном метеоризме, можно получить органную музыку 💺💨🎶
At the risk of inciting a hate crime, I'm dying to know what you did with the mold...and if it's for sale. (I can't be the only one who thought about this...and if I am, I still wanna know!) I just watched a string of your fantastically edited videos, and of all the very apparent, enviable qualities you possess, it's your craftsmanship I call chief among them. To be creative is one thing, to be skilled is another, to share any of it is rare, to do it all so well even more so, and to look like that while doing it all...almost criminal. I bet you got as many haters as you do fans...but I ask you, is there really much difference? haha. Above all else, it's apparent you've spent a lot of time loving these things you do. I know I'm just another comment from the proverbial peanut gallery, but for what it's worth, it looks like you are living a damn good life. In all seriousness, I find it incredibly inspiring. Newest subscriber/fan right here!
adambmabe atgmaildotcom
Gent! Refreshingly civil comment.
It is good work, and it gets you thinking.
That's a great idea. Think I might try making one. thanks
Loose the haters, you have skills and you know what you are doing. Another video that I enjoyed watching, thanks for taking the time working on such project and filming/editing it.
Genius!! Mind blown 🤯, hats of to you 🎩
Gangsta untill the long pipe penetrates trough...
All kinds of funny watching you make that mould.
Love your work. Love you. More please and thanking you,
First but print Stool I've seen. Great work !!
Good work, I would have holed, and threaded the rods in the middle (at a 60degree angle sothat it would be easier to install the M6 set screw） instead of just relying on epoxy resin to hold the weight.
I don't feel like the epoxy for the support onto the seat to the legs was a good idea cuz what if you end up wiggling the epoxy loose and support goes up your butt not joking this could be serious
Diese Verbindung würde niemals scheitern
Who else was thinking that if the central stork was not really, really secured, there could be a nasty accident?
Yes, my thinking is look like you, so dangerous
Yeah, I would have welded that part. It's a awesome design, I like it.
В общем все мне нравится, кроме штыря на эпоксидке... Не по себе как то))))))))))
Очень неудачная конструкция, на самом деле. С учетом трудозатрат весь проект в целом - бесполезен.
That's the weirdest cake stand...
Kidding aside, it's awesome.
This guy is a genious!
Love the creativity and dedication on this project. Seriously cool.
This is a really cool project. Did you weld a washer into the top of the tube that holds the spring steel rods? If the epoxy fails we are going to have to nickname you Vlad.
I thought about that too. lol
@@WilliamEllison because the historical figure is called vlad the impaled?
@@Professional_TH-cam_Commenter Correct Grimshaw.. Vlad Dracula
Very clever and creative!
Amazing job. I really hope for you that the welding on top of the support doesn't fail... That wouldn't be funny!
Anyway gorgeous creation
the way you twist your arm around by that bandsaw 😆 just epic...you almost made it look like it was twisting your arm...you make fascinating things! SUBSCRIBED!!😄
Really loved your stool man..
Sorry to see your video late... WHAT YOU DID WITH THAT EFFORT IS ABSOLUTELY MASTERCLASS. HATS OFF BRO..!!!!
very smart trick with the grill pins
I was wondering why you used spring steel for the stem... Glad I watched up to the end. Great work! Keep it up.
I love the shish kabob sticks profile tool... Genious! Definitely going to st... err borrow that idea! ;-)
Now imagine the seat dropping down and those spring steel bars shooting right up trough the middle... sorry couldn't resist thinking that way😁
With this design one can fart freely without any backpressure.
Maybe you should make one out of cones or different size pipes optimized for sound^^ My next project: Fart organ seat^^
You're going to have a bad day when that epoxy fails
nice design, but boy you're trusting that glue (6'25")...
Very cool result and it was great to watch the process!
Tienes unas manos increíbles. Eres toda una inspiración. Sigo todos tus trabajos. Gracias!
I like that melted rubber on the feet! very cool.
And pray the epoxy never fails 😂😂😂
Hhhhhhhhh yup i hope for him
Anyone else wince when he put that first pipe and screw in?
Wow. Good job!
Never trust just epoxy if any "12 mm spring steel rod" point to yours.
I'm thinking it's going to get a little Too personal.
I guess I've been on TH-cam to long, I'm scared he will impale himself with that stool.😨
If that epoxy let’s go it looks like those two rods are going to go right in someone’s ass
Thats what I thought too
Absolutely
No way I’m sitting on that ‘Ass-Crushing’ chair
Jokes aside about the epoxy suppository that may ensue down the road.... Great Content New Sub here!
Different strokes for different folks they say. Not my cup of tea, yet I admire your creativity. Thumbs up from me ;)
Fantástico. Parabéns pelo excelente trabalho!
Dont twist it too much to snap the welds and have the rods jam up and into you!
did you ever weld anything in your life?
I didn't see him weld the seat on... only epoxy.
Веселье будет когда эбоксидка отскочит!
*I like the bike thing.*
In the USA, it would have required a three ton truck to get the pipes from the store.
😆
You better pray your stand weld holds that's for damn sure
Я чет тоже за очко переживаю, и на такой стул не сел бы😁 но за идею - лайк
If i fart i can fly!! good job.
1:40 that must’ve been a very strange feeling?
6:22 When the glue is destroyed - there will be a surprise! Когда клей разрушится - будет сюрприз!
welds everything except the one joint you want to break last.
if it was my stool at least
I do not wanna sit on the chair only for that reason lol
Когда ножка сломается и воткнется в попу будет сюрприз
The seat is cool but the stand and base should be more sturdy
This can snap or bend its not reinforced enough
the last sequence made me nervous
You Sir, are genius ..
What the hell are you smoking to get such ideas :-) Soooo cool!
you know what to smoke to get creative ;)
I love it !!!
That is hell of a chair! 👍
I REALY LIKED THAT CHAIR🥰🥰🥰
greate work, cool Idea. Thanks for showing
Sascha
Fart safe stool :D
Jokes aside, I just subscribed after watching the fusion table video. This are for sure inspiring contents: great design, clever use of different materials and excellent executions. Thanks for sharing.
Очень классно, и ОЧЕНЬ много работы. И самое интересное что стул подходит только для одной жопы))))
I like your work and your ideas. it makes you want it all
If the weld fails, that rod is going up your butt!
Great now my girlfriend wants one it's going to be very expensive
sehr cooles Projekt! 👍💪
If that epoxy breaks free someone will get torpedoed......
exactly! other than that it was a nice job
I think I’d like a welded tube cap above the legs to guard against that... otherwise nice job!
Scewered..
Its all fun and games until that epoxy gives up, then its a really FUN game!
yea LOL using welds for everything and then EPOXY in that spot... yikes
th-cam.com/video/DORhmoDApF4/w-d-xo.html&ab_channel=J.S. reminds me of this clip. But then for real. :p
It was but a pipe dream.
Pixel_Qubed - oh... Butt just wait... 🧐
8:30 What if he goes through the stick?
I thaught the same. The Epoxy or what else he used to glue the sticks in the pipe, will sometimes get loose and then the seat move down with all his bodyweight, while the rods sticking up his ass or somewhere else.