ALL versions MWXNE Inverters 200 to 6000 amzn.to/3P6vUtL Atorch 200 to 1000 amp meters s.click.aliexpress.com/e/_opI4VN5 See www.sunfunkits.com for premium power, and use 110 Copper Bar amzn.to/4fpposz to build a mega amp power testing rig 2"w x 1/4" (use 2x1/4" for 600amp+over, 2x1/8" for under 600amp) *Need Tech Answers?* go👉 *Donate $5+ with KoFi* - ko-fi.com/john4kiera OR bit.ly/2buyaCoffee and you'll get my help and replies!!
I always enjoy a tear down of an inverter to take a good look. I watched a few different channels who did a tear down of a MFUZOP 12 volt 2,000 watt inverter and the inside was impressive including directional airflow. The fans are loud but powerful. The price was very reasonable so I got one. We don't mind the fans since it does not stay on very long but the neighborhood kids are louder which causes the wife to cuss. I don't mind since I was raised in the city while she was raised in the country in the middle of no where.
If you like that brand you will love their battery. CHEAP! 3 pack for $110 each MFUZOP 12V 100Ah LiFePO4 Lithium Battery with Low Temp Protection, Group 31, Up to 15000 Deep Cycles, Ideal for Trolling Motors, Yachts, Marine Use, Boats, RVs, Home Energy Storage - 3pcs Set 👉 item link: temu.to/k/ud7qbn00c4q 🎉 Coupon price[$331.47]
@@JOHNDANIEL1 I did not know they had a battery. I got the inverter off of Amazon. However, I already have three CYCLENBATT mini Lifepo4 batteries and will be getting another to complete my small solar set up. After that no more room to expand. The design was for a major power outage to run the gas furnace and refrigerator. But I do run the refrigerator off the inverter during the summer.
I'm like you in my bluntness about stupid actions. Like you said, they provided the studs with the inverter. They provide the wire with the inverter. It just stands to reason that the ring terminals should be a good match for the inverter.
Great test, looks like a good unit. The manufacturer's propaganda on Amazon says the idle consumption Watts are only 7.68!! That's almost too good to believe... My late mom had that exact same Farberware convection turbo-oven when I was in high school in the 70s. Dad wouldn't let us have a micro-wave, as he did non-destructive testing and inspection at a major airline and was VERY adamant that you really DON'T want radiation in your kitchen, or anywhere else in your home.
would be a nice Camper Inverter, would run my old old Camper AC, that I fixed and that thig is still R22 and man it gets it cold in there. But I like to replace it with a heat pump so I can also have heat, and use Gas as back up.
Yes if your using those 1500 to 1800 watt Camco style 120 volt Elements it should do OK. I have them in my 28 gallon, ones a 400 watt 12 volt, the other is a 1500 watt camco.
Just use it when you connect it up to battery. Or you can do a bypass resistor though one at a large battery switch with a push button momentary switch.
Does anyone make a two position disconnect switch for an inverter? Position 1 would have a pre-charge resistor and position 2 would be the on position?
@JOHNDANIEL1 I've been trying to destroy the Energetech 6000w split phase inverter for going on 2 years, with air compressor and high inductive loads. No issues other than assuming that the 2 EG4 rack mount batteries were close to top balanced when delivered. There weren't. 100% state of charge still has some cells 250-300mv lower than the topped out cells. Takes a couple dozen charge cycles to 100% SOC at Cell HV Cutoff for the onboard BMS to balance the cells out. The SWIPower 3000w only lasted for a month or two before the skill saw started smoking. Looked like low voltage issues.
That's a nice inverter. I wish that their larger ones came with more outlets. Their 5000 and 4000 watt inverters still have only two outlets. Amperage? Are these separate from each other to run two different circuits? I doubt it, but still curious.
All AC power comes from one main heavy center with the output being just wired as a 10/2 to the front terminals and a 12/2 to the 2 outlets. Total AC output amps I was running at 3850w on all the heaters and Kiera oven pulling right at 33 amps AC constant while we had them running that 25+ minutes. As for outlets, the reason that they do this is to force folks to use a hard wired plan for the heavy loads. It did a lot better than I expected it would for the price.
ALL versions MWXNE Inverters 200 to 6000 amzn.to/3P6vUtL Atorch 200 to 1000 amp meters s.click.aliexpress.com/e/_opI4VN5 See www.sunfunkits.com for premium power, and use 110 Copper Bar amzn.to/4fpposz to build a mega amp power testing rig 2"w x 1/4" (use 2x1/4" for 600amp+over, 2x1/8" for under 600amp) *Need Tech Answers?* go👉 *Donate $5+ with KoFi* - ko-fi.com/john4kiera OR bit.ly/2buyaCoffee and you'll get my help and replies!!
Inverter heldup good stuff
I always enjoy a tear down of an inverter to take a good look. I watched a few different channels who did a tear down of a MFUZOP 12 volt 2,000 watt inverter and the inside was impressive including directional airflow. The fans are loud but powerful. The price was very reasonable so I got one. We don't mind the fans since it does not stay on very long but the neighborhood kids are louder which causes the wife to cuss. I don't mind since I was raised in the city while she was raised in the country in the middle of no where.
If you like that brand you will love their battery. CHEAP! 3 pack for $110 each MFUZOP 12V 100Ah LiFePO4 Lithium Battery with Low Temp Protection, Group 31, Up to 15000 Deep Cycles, Ideal for Trolling Motors, Yachts, Marine Use, Boats, RVs, Home Energy Storage - 3pcs Set
👉 item link: temu.to/k/ud7qbn00c4q
🎉 Coupon price[$331.47]
@@JOHNDANIEL1 I did not know they had a battery. I got the inverter off of Amazon. However, I already have three CYCLENBATT mini Lifepo4 batteries and will be getting another to complete my small solar set up. After that no more room to expand. The design was for a major power outage to run the gas furnace and refrigerator. But I do run the refrigerator off the inverter during the summer.
Great performing inverter also love Kiera's little oven. This is being a great week. Keep the videos coming. 👍👍👍👍🙏🙏🙏🙏
More to come since the weather ain't good for much.
I'm like you in my bluntness about stupid actions. Like you said, they provided the studs with the inverter. They provide the wire with the inverter. It just stands to reason that the ring terminals should be a good match for the inverter.
Thanks for the video! Looks like it’s using same control circuitry as BougeRVs inverters.
Great test, looks like a good unit. The manufacturer's propaganda on Amazon says the idle consumption Watts are only 7.68!! That's almost too good to believe... My late mom had that exact same Farberware convection turbo-oven when I was in high school in the 70s. Dad wouldn't let us have a micro-wave, as he did non-destructive testing and inspection at a major airline and was VERY adamant that you really DON'T want radiation in your kitchen, or anywhere else in your home.
Back then, RADAR range was definitely some Rads, since Sharp/Tappan new designs in 1977, Microwave is all based on EMF.
would be a nice Camper Inverter, would run my old old Camper AC, that I fixed and that thig is still R22 and man it gets it cold in there. But I like to replace it with a heat pump so I can also have heat, and use Gas as back up.
I had the opposite issue with my terminals. For the inverter I bought that looked very similar to this one they were too small.
I got an inverter built like that with the dual battery hook up.
Can this be used with a solar charger and a good battery bank to run a 2 element Electric water heater?
Yes if your using those 1500 to 1800 watt Camco style 120 volt Elements it should do OK. I have them in my 28 gallon, ones a 400 watt 12 volt, the other is a 1500 watt camco.
can dis charge a lovense at chelybisnk in siberia darlinks ?
This thing has so much juice it can even run your toys. That means it has almost nuclear level output!
Can someone explain how to to wire capacitors with your inverter
Just use it when you connect it up to battery. Or you can do a bypass resistor though one at a large battery switch with a push button momentary switch.
Does anyone make a two position disconnect switch for an inverter? Position 1 would have a pre-charge resistor and position 2 would be the on position?
For you and many others asking I may just make a video on exactly how to do it yourself.
5/16"≈8mm not 10mm
China doesn't necessarily understand fractional inches.
They do know, otherwise You have to tell them all their ads selling 5/16 nut drivers and 5/16 terminals listed as that ( not 8mm ) is not accurate!
@JOHNDANIEL1
I've been trying to destroy the Energetech 6000w split phase inverter for going on 2 years, with air compressor and high inductive loads. No issues other than assuming that the 2 EG4 rack mount batteries were close to top balanced when delivered. There weren't. 100% state of charge still has some cells 250-300mv lower than the topped out cells. Takes a couple dozen charge cycles to 100% SOC at Cell HV Cutoff for the onboard BMS to balance the cells out. The SWIPower 3000w only lasted for a month or two before the skill saw started smoking. Looked like low voltage issues.
That's a nice inverter. I wish that their larger ones came with more outlets.
Their 5000 and 4000 watt inverters still have only two outlets. Amperage?
Are these separate from each other to run two different circuits? I doubt it, but still curious.
All AC power comes from one main heavy center with the output being just wired as a 10/2 to the front terminals and a 12/2 to the 2 outlets. Total AC output amps I was running at 3850w on all the heaters and Kiera oven pulling right at 33 amps AC constant while we had them running that 25+ minutes.
As for outlets, the reason that they do this is to force folks to use a hard wired plan for the heavy loads. It did a lot better than I expected it would for the price.