How to Replace Front Door Lock Actuators 2007-2011 Toyota Camry

Buy Now!
New Door Lock Actuator from 1AAuto.com 1aau.to/ia/1ADLA00326
This video shows you how to install new front door lock actuators from TRQ on your 2007-2011 Toyota Camry. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obzg/1AXAA00013
• Pocket Screwdriver
• Trim Tool Set 1aau.to/oaoU/1AXXX00006
• T30 Bit
• Ratchet 1aau.to/obVm/1AXAA00016
• Torque Wrench 1aau.to/oaYp/1AXAA00044
• Gloves 1aau.to/oaHT/1AXSS00048
• Safety Glasses
• Pick 1aau.to/oWD/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@c.thurston8116]

You never mentioned what problem you were having why would you want to replace this part?

[@c.thurston8116]

So What does this do for you? Will it fix the problem with the lock not locking with the remote key fob

[@c.thurston8116]

Real clever how you broke the door handle frame when trying to remove door lock rod and quickly moved on without explaining that now you need to replace the door handle mechanism inside the door at a cost of $125+. You cant just pull on that rod and there is no good way to grab it. There is a tool to get the rod out and without it this is exactly what happens. Isnt it