My experience with the 372 clones, automatically change coil to a Taiwan or German coil and replace the crank seals with Hyway or oem, before getting started with a new build. If issue with tuning arise change carb and intake boot and metal ring to oem. Every clone 372 I own, 4 currently has had all of these parts changed out to make them reliable long term.
Why use the 266 piston over the 268? Honest question? But sounds like that saw rips pretty good! But I would agree with Coil my 865 coil started doing all kinds of weird things including run like a rev limiter limp mode kicked in and wouldn't rev up. Had factory blue coil and problems went away!
The neotec, is it closed port like the FT? I thought the 65cc were all open port until i seen a FT. Assuming all the round intake cylinders are closed port
My experience with the 372 clones, automatically change coil to a Taiwan or German coil and replace the crank seals with Hyway or oem, before getting started with a new build. If issue with tuning arise change carb and intake boot and metal ring to oem. Every clone 372 I own, 4 currently has had all of these parts changed out to make them reliable long term.
👍😁
Curious to see what's going on with it. I will stay tuned.
Well I changed the coil and think it’s fixed now
@Aaron_A_Lynch Very cool man. Easy enough. Love the videos. Every saw seems to have a needed tweak here or there. Great work man.
Im sure you will have it cutting super good in no time at all
I put a 268 open port piston in mine, and did opened transfers hope its strong
Why use the 266 piston over the 268? Honest question? But sounds like that saw rips pretty good! But I would agree with Coil my 865 coil started doing all kinds of weird things including run like a rev limiter limp mode kicked in and wouldn't rev up. Had factory blue coil and problems went away!
I like the full skirt on the 266 piston..better support at high rpm
Why buy a Neotec over the Farmertech ? Fairly honest question? 🤔
I bought a few a couple years ago to see what they was about just now getting into this one..not impressed🥴
Was the coil makin iratic idle as well?
Yeah
The neotec, is it closed port like the FT? I thought the 65cc were all open port until i seen a FT. Assuming all the round intake cylinders are closed port
Yeah the nh872 is closed port..the nh865 is open port
@Aaron_A_Lynch Is FT the only one doing the 65cc closed port cylinder?