It’s very interesting to see what other types of measurement software exists for cmms. I’ve only been in quality for 3 short years. I learned a little about measureMax and recently we switched to PC-DMIS and now I’ve been learning a little about programming with it. Very curious to see what else exists out there and how they differ from each other
I’ve ran a little PC-DMIS, Starrett Apogee, old school Brown and Sharpe Validator (late 80’s), and now MCOSMOS. Nowadays most CMM’s have software that is somewhat similar. Just different places to click to do similar routines. I tell my students that if you learn CMM fundamentals, the software is just a different interface and you’ll be fine.
Merhabalar , Herhangi bir kurumdan eğitimini mi aldınız yoksa kendiniz mi öğrendiniz cihazı kullanmak istiyorum ancak yeterli bilgiye sahip değilim program yazma konusunda yardımcı olursanız çok sevinirim. :)
I’ve got a couple videos that show alignment. However they use the plane-line-line method. There’s many more methods available. I need to make some videos using the other ones.
In doing a little research it seems the TP20 is less expensive, more robust, and holds accuracy longer. The TP200 is more expensive, able to accurately measure tighter tolerances, but more delicate. So it would really depend on what you are measuring with regards to the pros and cons above.
It’s very interesting to see what other types of measurement software exists for cmms. I’ve only been in quality for 3 short years. I learned a little about measureMax and recently we switched to PC-DMIS and now I’ve been learning a little about programming with it. Very curious to see what else exists out there and how they differ from each other
I’ve ran a little PC-DMIS, Starrett Apogee, old school Brown and Sharpe Validator (late 80’s), and now MCOSMOS. Nowadays most CMM’s have software that is somewhat similar. Just different places to click to do similar routines. I tell my students that if you learn CMM fundamentals, the software is just a different interface and you’ll be fine.
Uzmanlık alanım çok sevdiğim bir cihazdır kolay gelsin her türlü programla ve ölçüm yapıyorum☺️☺️☺️
Merhabalar , Herhangi bir kurumdan eğitimini mi aldınız yoksa kendiniz mi öğrendiniz cihazı kullanmak istiyorum ancak yeterli bilgiye sahip değilim program yazma konusunda yardımcı olursanız çok sevinirim. :)
Thank you for your video! How do you measure form tolerances? Thank you!
Good video.
Please make more video on cmm
Please make a video on the topic of mcosmos calculator used.please explain in detail. I need this on urgent basis.please reply if possible
Can i measure surface roughness of a laser cut circle with a crysta apex s ? Please reply sir
thank you very much. please when you gone talk about alignments? I am starving for alignment. starved
I’ve got a couple videos that show alignment. However they use the plane-line-line method. There’s many more methods available. I need to make some videos using the other ones.
What version of MCosmos do you have? Programming for 5 years now , if u have any questions just ask :)
12:40 - you never want to shank out. Never let a friend shank out.™
Hi what does the nemory mean in 7:39 ?
where can i get trained and certified in denver/boulder area?
I’ve looked for colleges around that area and haven’t found anyone offering training.
I’ll keep looking.
What model of Mitutoyo CMM are you using in your instructional video?
It’s a 7106 with the Crysta Apex software. 700mm X, 1000mm Y, 600mm Z
Which probe body is better? TP20 or TP200
In doing a little research it seems the TP20 is less expensive, more robust, and holds accuracy longer.
The TP200 is more expensive, able to accurately measure tighter tolerances, but more delicate. So it would really depend on what you are measuring with regards to the pros and cons above.
Hi we have new mitutoyo crystal apex v but we cant measure cone. Can u help me
Let me look into that. I haven’t really measured a lot of cone shapes before.
@@machinisttodd ok i will wait ur video thanks for everything
Which software is it sir
The CMM in the videos has the MCOSMOS software.
Z should be locked.