excellent video - thanks! I am not having issues with the heater lighting, instead the height of the flame seems to be running about 60% (I have a second heater - and so I have direct comparison). Any suggestions on what to do to resolve?
Thanks for the quick response. Originally it worked at 100%. Any chance you can do a video or suggest steps to ideally fix the regulator? (or replace if I have to)
Thanks for the help on how to fix my pyramid heater thermocouple
Thanks for your help! My issue was the starter. I got a flat head screwdriver to push the needle a little closer to the pilot light and voila.
Great video, took me a while to find it here.
Thanks.
excellent video - thanks! I am not having issues with the heater lighting, instead the height of the flame seems to be running about 60% (I have a second heater - and so I have direct comparison). Any suggestions on what to do to resolve?
Hello
Has it always been running about 60% Most likely it is from the regulator issue
Thanks for the quick response. Originally it worked at 100%. Any chance you can do a video or suggest steps to ideally fix the regulator? (or replace if I have to)
After I watched your video. I changed the whole complete parts and still do not stay lit. Can you tell me what is wrong?
Such beauty... TEMu got me
My pilot light won’t even light. It sparks and I have propane but can’t get a flame.
Hello
If its a new propane tank, it sometimes will take a little bit for it to prime the line.
I have the same issue, changed the regulator and still nothing.
@@javierbacaicoa bypass the thermal cupler
@@aroundthehousediyguy5782 bypass the thermal cupler
@@lazarogarcia5958 by bypassing the cupler you mean just don’t connect it?