Could you a combination of all the fossilizer with paleotrex,ractonite,wingfinger,transmutate,vertebreack, Dracodon,Tricranius, skellitor,the mammoth one, spindile. You don’t have to do vertebreack or dracodon but I just wanna se how it would look. Also keep up the good work
Thanks my guy, maybe I'll decide to school him eventually, I do need Impactor for sure, just been slightly tightly paying my billzesis so I can come up with an ill thesis! Lol idk, just woketh upeth
Yeah, he's good bot, but just had some bad parents that didn't properly QC him while he was growing up. He means well tho, and I figured out a way to tighten the leg joints with the paper. Had to unscrew the thigh, but it's super tight now.
Yeah.... they did a really poor job on the QC. I'm honestly surprised that it pass inspection. I'm gonna see if I can remove the claw, and then dip the connector part in hot water to see if I can squeeze it down to fit better. That or I'm gonna end up ruining my toy haha XD
Yeah, I sometimes use that, or this other thing called Kiki. But my fav is pieces of paper haha. I was able to fix the Spindle leg issue by unscrewing it and adding some paper in there for friction lol
For the arm wrist I just switched them for their original one, and the left leg on my copy thing was so tight I had to disassemble the leg to loosen it
So, Got Bot had a pro tip about those wrists on spindle. Put the outtermost mushroom, in the outtermost port. It does leave a little gap, but the hand hardly ever falls off now, no shit. Try it.
If the naming convention behind paleotrex caught you by surprise, here's a bit of trivia: Pterodactyls had wings formed by a skin membrane attached to the body and the their longest "finger." Pterodactyl comes from the Latin words meaning: wing finger
😲😲😲😲😲 MIND OFFICIALLY BLOWN!!! Wow, that is the coolest thing I'm gonna learn today, and the day just started! I just looked it up - "...the Greek word pteron, meaning “wing,” and daktulos, meaning “finger." AHHHHHH That's so coool! Thanks for sharing this, bud!! How'd you know this btw?
When I was a kid, I was also into dinosaurs, had this weekly magazine subscription and learnt a bunch of random stuff! Had one for bugs too,they were kinda cool and came with these skeleton glow in the dark model kits, think it's where my collecting habits began
Skelivore is the Goat of the rex molds though. If it's between Ractonite and Mastodon, Mastodon regardless of his shortcomings. The black painting seals it for me.
Yeah, Ptrex hands down. I love me some Skeli, but mine is a bit loose. Not as bad as Spin, but def the loosest when compared to Ptrex and Mutate. I love the colors tho!
@@BotBenderOrinj just brainblasted a build for a cancelled resident evil monster using Skelivore. You can also make Cerebusmon (plutomon?) With him using Skelivore and Mastro in some quantity. Prob a 2/2 or 3/2 split. Mastro is being the 3 of if so.
Spindle is definitely worse as a fossilizer but I like it a bit more as its own thing/character. I guess I lucked out with mine because the only problem is the mushroom pegs on the forearms, the rest of it is toleranced pretty well. I also love spinosaurus, even if this mold isn't very accurate
I totally know what you mean. If mine wasn't racked with QC issues, it'd be a toss up. I love the fact that they chose a Spinosaurus! Glad to hear that yours is toleranced decently! At least some of us lucked out :) I found a way to fix mine tho. Gonna put up a "fix it" video in the near future.
I don't mind the mold changes but the color scheme. He looks like that because they essentially used the same plastic for both Spindle and Impactor and I already have an Impactor, it's a great figure. I actually really like that mold and if you don't have one already then highly recommend it. But I would prefer Spindle in a different color scheme. I've said it before I actually like the more natural colors the original 3 Fossilizers and Vertebreak (who technically isn't a Fossilizer since he doesn't have the gimmick but still shares the visual style with) had. I think Masterdominus works a little bit better as a Fossilizer but the colors aren't consistent through out all the parts so it still looks a bit artificial compared to the originals. I really just wish they had more Earthy tones in their color schemes so they fit better with the original guys.
Wholeheartedly agree. He's super PB&J haha. I bet they'll do a recolor at some point. Hasbro luvvvvvs them repaints, and I'd DEFFFFFFinitely buy it hahha. I really hope they address the mold degradation and tolerance issues tho. Honestly, it's the worst QC'd Fossilizer that I own. Yeah, and MasterD isn't too bad. I kinda like the matte black that he's got going on. I can even live with the gold and silver accents. I wish they'd kept his head peg and also his head the same size; at least for the purposes of bot bending XD
I would've picked one up, despite the colour pallette, if only to airbrush and ink wash to fit in with the others. Then orinj drops the gummy plastic comment. Guess im waiting for someone to deconstruct, scan and upload a file for print 🙃
Is it possible to get spindle and the other remoulded fossilisers without the 2nd half of the two-packs? (I got enough transformers, I don’t want extras just to get some fossilisers)
Yeah, Spindle is a wonderfully designed toy; his QC is horrible that's all. If it was on par with Ptrex, it'd be a tough call, but with all his issues, I couldn't vote for him 😄
Judging by your description of the plastic texture being different compared to paleotrex kinda ruins some interest i had of the figure😕 great review though👌
Thanks very much! Still a great toy tho. I was able to fix some of the loose joints by taking apart the figure and using little pieces of paper to tighten the fits :)
Paliotrex is definetly better his axe blade looks better his head mace looks better and it doesnt have as many qc issues also the t rex head is better for combining as you can make many things that are not tied to the robot head
Eeek dude I'm a little disappointed with this thing!! Really don't know what's goin on here... But that's a little bit dangerous and qc must be slackin to let tht go by
@@BotBenderOrinj just to prevent future figures from this mistake, it's a shame when something can be so good but it's held back by a tiny flaw, like me lol 🙃
@@BotBenderOrinj honestly never knew they existed until this video and channel. I subbed cus I wanna make videos of my own and channels like yours really give me the courage. You may not see big numbers but the fact that you keep making them is enough to motivate me. Also relaxing voice to fall asleep to
Oh cool! Yeah, these are great toys to express one's creativity! I'm glad you found the channel and are enjoying the content. My some purpose for making the videos is to share with yall what I've built, so I'm happy to hear that people find them enjoyable! It's very humbling 😌
Could you a combination of all the fossilizer with paleotrex,ractonite,wingfinger,transmutate,vertebreack, Dracodon,Tricranius, skellitor,the mammoth one, spindile. You don’t have to do vertebreack or dracodon but I just wanna se how it would look. Also keep up the good work
Hello there! I have already completed it, and it incorporates both Vert and Draco :-) Video will be released next week. Stay tuned!
Gratz on 3k!
Thank you kindly, bud! Can't believe it! :D
I combine spinle with the scraphook and to be honest... It works pretty well. Love your work dude keep it up man.
Thanks my guy, maybe I'll decide to school him eventually, I do need Impactor for sure, just been slightly tightly paying my billzesis so I can come up with an ill thesis! Lol idk, just woketh upeth
Yeah, he's good bot, but just had some bad parents that didn't properly QC him while he was growing up. He means well tho, and I figured out a way to tighten the leg joints with the paper. Had to unscrew the thigh, but it's super tight now.
Yeah, when I got my Spindle last Tuesday (the 2nd of August), I noticed the same things, most notable the loose wrist/ankle mushroom peg.
Yeah.... they did a really poor job on the QC. I'm honestly surprised that it pass inspection. I'm gonna see if I can remove the claw, and then dip the connector part in hot water to see if I can squeeze it down to fit better. That or I'm gonna end up ruining my toy haha XD
The same thing happens to my Skelivore from the two pack.
Sorry to hear that =/ Mold degradation ftl
@@BotBenderOrinj floor polish should help tighten the joint, just apply it on to the loose peg or joint.
Yeah, I sometimes use that, or this other thing called Kiki. But my fav is pieces of paper haha. I was able to fix the Spindle leg issue by unscrewing it and adding some paper in there for friction lol
For the arm wrist I just switched them for their original one, and the left leg on my copy thing was so tight I had to disassemble the leg to loosen it
Wow, so I guess there are different QC issues. I bought 3 of them, and they all suffer the same QC problems =/
Agree, I think the plastic formulation is different
That's a good way to put it. The chemical formulation / composition appears to be different.
I didnt get Spiney but the only reason I like him is the Bludgeon colours... but I do like my Paleotrex lol.
Yeah Spindle's great! Just really bad QC. And I didnt even think of Bludgeon!!! Now I totally wanna make a build dedicated to him!
So, Got Bot had a pro tip about those wrists on spindle. Put the outtermost mushroom, in the outtermost port. It does leave a little gap, but the hand hardly ever falls off now, no shit. Try it.
Oh interesting. Good to know!
If the naming convention behind paleotrex caught you by surprise, here's a bit of trivia:
Pterodactyls had wings formed by a skin membrane attached to the body and the their longest "finger." Pterodactyl comes from the Latin words meaning: wing finger
😲😲😲😲😲 MIND OFFICIALLY BLOWN!!! Wow, that is the coolest thing I'm gonna learn today, and the day just started! I just looked it up - "...the Greek word pteron, meaning “wing,” and daktulos, meaning “finger." AHHHHHH That's so coool! Thanks for sharing this, bud!! How'd you know this btw?
When I was a kid, I was also into dinosaurs, had this weekly magazine subscription and learnt a bunch of random stuff! Had one for bugs too,they were kinda cool and came with these skeleton glow in the dark model kits, think it's where my collecting habits began
That's super awesome :) I remember magazines hahah. I used to get Ranger Rick and Highlights for Kids when I was younger 😄
What if Spindle was the same tanish color as Paleotrex?
I'm hoping we get one of those! And you know Hasbro luvvvs them repaints XD haha
I prefer the more "realistic" colors of Pel, as well as the fact that he doesn't COME APART AS SOON AS YOU TOUCH HIM
Hahah some super truth right there!
Paleo because spindle wouldn't exist without his mold. Spindle also has the ankle joint issues
Skelivore is the Goat of the rex molds though.
If it's between Ractonite and Mastodon, Mastodon regardless of his shortcomings. The black painting seals it for me.
Yeah, Ptrex hands down. I love me some Skeli, but mine is a bit loose. Not as bad as Spin, but def the loosest when compared to Ptrex and Mutate. I love the colors tho!
@@BotBenderOrinj If you sell the Skelivore, lemme know.
@@BotBenderOrinj just brainblasted a build for a cancelled resident evil monster using Skelivore. You can also make Cerebusmon (plutomon?) With him using Skelivore and Mastro in some quantity. Prob a 2/2 or 3/2 split. Mastro is being the 3 of if so.
If I sell him, you'll be the first to know!
Spindle is definitely worse as a fossilizer but I like it a bit more as its own thing/character. I guess I lucked out with mine because the only problem is the mushroom pegs on the forearms, the rest of it is toleranced pretty well. I also love spinosaurus, even if this mold isn't very accurate
I totally know what you mean. If mine wasn't racked with QC issues, it'd be a toss up. I love the fact that they chose a Spinosaurus! Glad to hear that yours is toleranced decently! At least some of us lucked out :) I found a way to fix mine tho. Gonna put up a "fix it" video in the near future.
@@BotBenderOrinj although, I don't think anyone lucked out with masterfominus lol all the heads stay on with hopes and dreams
Yeah, I bought a few and they're all loose lol. Mold degradation fml 😄😑
Maximals Fossilizers:
Spindle
Dracodon
Wingfinger
Master Dominus
Tricranius
Transmutate
Predacons Fossilizers:
Paleotrex
Ractonite
Vertebreak
Forgot Predacon Skelivore! :D
I don't mind the mold changes but the color scheme. He looks like that because they essentially used the same plastic for both Spindle and Impactor and I already have an Impactor, it's a great figure. I actually really like that mold and if you don't have one already then highly recommend it. But I would prefer Spindle in a different color scheme. I've said it before I actually like the more natural colors the original 3 Fossilizers and Vertebreak (who technically isn't a Fossilizer since he doesn't have the gimmick but still shares the visual style with) had. I think Masterdominus works a little bit better as a Fossilizer but the colors aren't consistent through out all the parts so it still looks a bit artificial compared to the originals. I really just wish they had more Earthy tones in their color schemes so they fit better with the original guys.
Wholeheartedly agree. He's super PB&J haha. I bet they'll do a recolor at some point. Hasbro luvvvvvs them repaints, and I'd DEFFFFFFinitely buy it hahha. I really hope they address the mold degradation and tolerance issues tho. Honestly, it's the worst QC'd Fossilizer that I own. Yeah, and MasterD isn't too bad. I kinda like the matte black that he's got going on. I can even live with the gold and silver accents. I wish they'd kept his head peg and also his head the same size; at least for the purposes of bot bending XD
I would've picked one up, despite the colour pallette, if only to airbrush and ink wash to fit in with the others. Then orinj drops the gummy plastic comment.
Guess im waiting for someone to deconstruct, scan and upload a file for print 🙃
Is it possible to get spindle and the other remoulded fossilisers without the 2nd half of the two-packs? (I got enough transformers, I don’t want extras just to get some fossilisers)
Unfortunately, no =/ Hasbro wanted to milk us for 2 bots so they're packed they way they are (lol but not lol)
@@BotBenderOrinj lol, at least Tricranius goes solo…
Yeah, def. He's been going for crazy prices on the aftermarket!
Hey I'm still wondering what can I do with 4 x paleotrex and 1 Inferno kingdom version... Paleotrex looks better.
I have a 4x Paleotrex family build coming out soon (Ptrex, TransM, Skeli, and Spin). I also like Ptrex more :-)
Personally I think Spindle is better because we've never really see spinosaurus in Transformers and there are plenty other T rex transformers.
Yeah, Spindle is a wonderfully designed toy; his QC is horrible that's all. If it was on par with Ptrex, it'd be a tough call, but with all his issues, I couldn't vote for him 😄
Judging by your description of the plastic texture being different compared to paleotrex kinda ruins some interest i had of the figure😕 great review though👌
Thanks very much! Still a great toy tho. I was able to fix some of the loose joints by taking apart the figure and using little pieces of paper to tighten the fits :)
Paliotrex is definetly better his axe blade looks better his head mace looks better and it doesnt have as many qc issues also the t rex head is better for combining as you can make many things that are not tied to the robot head
I 100% agree. It would've been a closer race if Spin didn't have all those issues. But I still love him just the same, flaws and all :-)
You see paleotrex might be better but I am a wrecker fan so that makes this question invalid
Totally fair! :D
your gonna hate me for this, but i like spindle better for the looks
Now why would I hate you bud haha. Spindle is great! Just the QC is really bad. Like a really great looking car that has problems staying together lol
Eeek dude I'm a little disappointed with this thing!! Really don't know what's goin on here... But that's a little bit dangerous and qc must be slackin to let tht go by
Yeah, I think I'm gonna write an email to their customer service group. Pretty disheartening =/
@@BotBenderOrinj just to prevent future figures from this mistake, it's a shame when something can be so good but it's held back by a tiny flaw, like me lol 🙃
This guy haha too funny 😄😄
@@BotBenderOrinj lol too legit to quit as well!!
Bro they 💀
Bone brothers bonded in battle
@@BotBenderOrinj honestly never knew they existed until this video and channel. I subbed cus I wanna make videos of my own and channels like yours really give me the courage. You may not see big numbers but the fact that you keep making them is enough to motivate me. Also relaxing voice to fall asleep to
Oh cool! Yeah, these are great toys to express one's creativity! I'm glad you found the channel and are enjoying the content. My some purpose for making the videos is to share with yall what I've built, so I'm happy to hear that people find them enjoyable! It's very humbling 😌