Stoeger XM1 , part 2, New Transfer port , low power fix !
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2023
- #Stoeger #XM1 #pcp
Stoeger XM1 ,new transfer port. part 2 of 3.
part 1 - strip down
part 2 - new transfer port
part 3 - testing
swapping out the transfer port ,
Trying to fix low power issue ,only running at 9.5 ft/lb.
Max for UK is 12ft/lb.
Vidéo très bien expliquée !
Ça doit être drôle de voir comment l’état vérifie la puissance lors d’un contrôle de ce jouet à air comprimé !?😂🎯
thanks 🙂, they keep an on our toys here 😁
Hi! I've loved watching you working in the first and second videos. I assume you're used to doing this kind of thing, so well done and thanks for sharing your expertise.May I ask how old is the Stoeger and how well used has it been.
Secondly, how do you rate it, as I am considering getting one as my first foray into a rifle for 60 years!! Would really welcome your opinion, and again, thanks for the shows!!
Dermot
hi, thanks 🙂, this was the first time , I watch a few vids before giving it a go.
This is 12 months old ,had a fair amount of usage .I like it, its light and easy to use ,takes 2 minutes to fill with a hand pump ,seconds with a divers bottle . 25 ish usable shots from a fill.
have a look at my "Stoeger XM1 .22 ,pellet testing" see how it shoots . I will be doing another vid soon to see what affect changing the port has had.
This was my first PCP rifle ,had springers before this ,PCP's are so much easier to shot. Its one of the cheapest out there ,good value for money ,I think ! there addictive though 🤣, I have a couple more PCP's now.
Also have a look at Gamo rifles ,I picked up a Gamo Phox for the same price second hand as the XM1 .
Gamo are are connected to BSA and there made in the BSA factory .
Thanks for watching ,Charlie
I've just got an XM1 S4, and having the opposite problem. Although here in France we can legally have to to 20 joules (14.75 ft lbs), mine is putting out a consistent 30 joules (23 ft lbs). Not too concerned for my use, as I have a cat c license but I will keep a check on it through the chronograph as I shoot more.
hi, that's not good that they've sold it overpowered.at least your licence covers you. don't think that would happen here in uk. when iv bought from a shop they always have a chronograph reading with /in the box.
@@cjoutdoors8264 I got the accuracy card with the rifle, where they test shot a group of five. It says on there, Power of rifle: Full Power. The wife bought it for me for Christmas and she doesn't have a license, so it should really have come under 20 joules. As I said, not an issue for me, but some might get caught out without knowing.
Merci🔵⚜🔴
The battered transfer port could be due to previous service, where it may have been hammered for taking out. I saw this in official Stoeger XM1 video
Hi, could well be that , I did send it back to the distributer ,who increased the power a little , wasn't worth the effort sending it to them.
hello buddy do you think the port size will be the same sizes for the .177 to get just under sub 12? and have you got a link for the ports I've seen some brass ones online but quite pricey. cheers mate
Hi, would it be the same on .177 , I don't know ! I got ports from " trrobb.com " smk CP1/2 is the same block. www.trrobb.com/details/p1449438_15966795.aspx
If you give it a go let us know how you get on 👍
Stoeger is Italian with its routes in Beretta but it looks like they source most of their parts from China, the parts shown are identical to that of the Victory CP2. I don't think this rifle is regulated the Bullpup model is.
Hi @musicferret1829 ,thanks for the comment. yes your correct its same as victory CP2 ,the ports had were labelled for "SMK CP1/CP2" . Iv seen mixed reports if it regulated or not ! Have read that a regulator for a PR900 would fit ,but not completely sure on this . Charlie.
Mate do you have a link for a new port please
Just bought a new stoeger xm1 for my lad to use on our farm
PS just subscribed
hi @kerm9807 trrobb. com have them and i think bagnallandkirkwood co.uk ,the post for an smk is the same ,ta for subscribing :)
Just at a random guess 😉. What sort of power do u think it would ov been shooting with the 3mm in mate 😇
hi , a guess would be in the region of 19 ft-lb ish
@@cjoutdoors8264 😬 cheers pal
Qual é o nome dessa válvula de ar que vc trocou ai para aumentar a pressão quero comprar pra trocar da minha e eu não sei o nome pra pesquisar ?
Hi, it's a transfer port
Hola amigo podrías dejar enlace para los chicles ? Gracias y buen video
Hola ,not sure if this is what you want ! intl.stoegerairguns.com/xm1/ hope it helps . thanks for the comment 👍
I drilled the port and the power went down, I wanted to bring 2 gram slugs above 220m/s and I got 156m/s. I now have less power. I would not recommend port drilling to anyone. Maybe get a stronger hammer spring but DO NOT TOUCH THE TRANSFER PORT.
Hi, I didn't want to drill, that's why I got the set of ports so I still have the original port if it didn't work. You could get a replacement port to match your original port!
@@cjoutdoors8264 apparently the port is matched with plenum so if they don't match there is a kind of turbolenze....
@@borislavradonjic660 i didnt think the XM1 rifle had a plenum , is it the XM1 bullpup that you have .
Where do you purchase the transfer ports from?
@MrRockstar1968 hi ,got mine from trrobb com ,"smk cp1" is the same port .think bagnallandkirkwood co.uk do them as well
@@cjoutdoors8264 Thanks for the info, much appreciated.
Hiya mate, has this reduced shot count now before it falls off the regulator/ how many shots are you getting now at the new muzzle energy of 11.2ftlb ? Did you adjust the regulator at all ? Thanks
Hi, shot count down a little , getting around 25! Shots , will put a vid up soon showing 200 bar to 100.
Didn't touch regulator .
@@cjoutdoors8264 Ok thanks mate. I believe if you knock the reg down to around 100 bar and transfer port at the 3mm you will still get similar muzzle energy but will be able to lighten the hammer spring and increase shot count. Subbed and will keep eye out for vid. Cheers
@@stukyu thanks for the info ,might have to have a look at the reg. Thanks for subbing 👍😀
The brass part should not come out when taken apart it should be tight in
Thought that myself ,was a little surprised when it fell out . No idea why its like that .Was holding air fine .
@@cjoutdoors8264 th-cam.com/video/5uVrVgqa88c/w-d-xo.html
I think this link will help its the full strip down of the xm1 just to show you how Tight it is . On mine the o-ring was dry and damaged
@@keithfoster7678 thanks for that , yes mine definitely not like that ,i wonder if when it went back to the shop they altered the hole ! the brash port did have marks on the edge that would match if it was tight , a bit strange !!