PLANS NOW AVAILABLE! I've linked all of the plans in the video description. Included in the plans are a cut list and tips and tricks to help you along the way!
Dude... You're a genius. You just taught me at least 3 game changing techniques. Sanding dowels with a drill, using a speed square with a circular saw, and of course the method of making floating shelves without expensive hardware. Thank you! Awesome work! 5:49
ArtByCRiley plans will be available soon which I hope will help! This project was last minute and rushed so I didn’t get a chance to take my time and get the most out of it. There may be another one in the future!
wow, thanks for the video, I dont know how to do pocket holes lol. I also thought I had to buy long boards never dreamed you could use plywood, probably cheaper, also I like that you pre painted or primed it .
Thank you! Glad I could help! The nice thing is you can rip them to whatever width you want and if you need thicker pieces you can just stack and glue more pieces together
Thank you for this vid. Thank you for your very laid back teaching techniques. We built these into two closets after moving from a 2400 sq. ft. home to an 800 sq. ft. home. They were life savers when it came to space saving and organization. Thanks again. Really do enjoy your helpful vids.
I so know what you mean by that sizing down bit, done it a few times over the decades. Too much stuff and not enough house lol. Love these cubby shelves.
Is there something else we can use if we don’t have a crown stapler? Can we use pocket holes on both sides, or would we have to countersink screws to make the butt joint? Would a brad nailer not be strong enough?? Rookie here, thanks in advance!!!
I think most of those options would work great! I would say any form of screw (pocket hole, butt joint, ect.) doesn't necessarily need glue but if you used a brad nailer I would just make sure to glue every joint and I think it would be plenty strong enough! The other thing that's a nice trick is to use pocket holes, but when you align everything, pop a couple brad nails it to hold the joint together before installing your screws.
@@SamMacyDesigns thank you for responding! Would it be possible to do pocket holes on both sides of the shelf inserts or would the screws interfere with one another from the other side?? I’m assuming that might be why you only used pocket holes on the top and not the bottom? Thanks!!!
I think you could use them for both sides, just makes sure you stagger the pocket holes, that should ensure they screws don’t run into each other. The only reason I used pocket holes instead of Brad nails for one side is because I was able to get my nailer in there to nail the butt joints but couldn’t for the other side. Pocket holes on each side will surely be stronger!
Yes exactly, unfortunately I feel like the top veneer layer keeps getting thinner and thinner as time goes on probably due to cost. Old plywood used to have a nice thick layer and these days it tends to be paper thin
Great build. Trying to determine what the proper width for each locker would be to allow for a hook on each side. Could you tell me how wide the unit is? I can divide it by 4.
Hi. I bought your plans but I don’t see a shopping list. How many sheets of 3/4” plywood will I need for each project? How many sheets of 1/4”? Thanks.
Oh really? I’ve never had any issues! Although I will say I’m not a super nit picky guy when it comes to things being perfectly square and what not. I’ve seen videos where people break down the construction of things with machining squares and other tools to measure the quality of equipment. I think it’s worth way more than what I paid for it personally and it’s never let me down!
This stuff was just labeled as "blondewood plywood" at my local Lowes back when I made this. The quality was amazing, I think it's 12 ply and I believe it only cost $35 a sheet at the time. Ever since I made this video I haven't been able to find it again 😢
Hey how much would you say this cost you to make? I guess just how much all that much wood would cost? My dad taught me all this stuff & I have all the tools I need so im def making one. I just wanted to know the wood situation lol. Reminds me of the cube shelving from Ikea. I just want to see if it would be cheaper to make one like this or buy one.
I made both of them for around $125 total, that includes the cost of glue and a box of screws. I found this plywood at Lowe's for around $45 a sheet so I think the cost of plywood in your area is going to be the determining factor! Hope that helps!
Will do! Thanks for the tool info. Also didn’t realize at first watch, but my weed whacker is currently being fixed at exit 18 equipment. Small small world, and smaller state if you’re in the 802. Thanks again and take care. Will let you know how it turns out and enjoy the fall while we’ve got it.
Great job! I liked this. Looking to build something for all my shoes and boots. Since you welcomed suggestions, one thing I would suggest is with the taller cubby type cabinet for jackets - have the seams of that thin plywood (i think it was Luan) land on one of your verticals. I noticed light coming through in the middle of the cubby where the seam was. Other than that - perfect! Do you plan on doing some edge banding or a finish to the raw edges? Or are they going to paint them?
Thanks Dave! I absolutely agree with that! I thought since they were going up against a wall that the seems would somewhat disappear but unfortunately they are still pretty obvious. You can still notice them quite a bit even without light shining through. And I won't edge band these ones since they wanted an unfinished look to match the other equipment in the gym but I plan on making a fancier version for our house and I will definitely be edge banding and experimenting with finishes! That's for the suggestions!
@@AlleyLoves hmmm I’m not actually sure! I just used a kregg pocket hole jig that I got from Lowe’s and I think everything Kregg makes is the same size. I used 1 - 1/4” #8 pocket screws if that helps!
I didn’t! But it would look sharp if you did! I was under a bit of a time constraint so it wasn’t really an option but I might try it if I build more of these.
@@SamMacyDesigns Sounds good. I am looking for a option like this in my sons room. Great video as normal! thank you very much and keep up the amazing work.
Typically Lowe's! I usually shoot for their "blondewood" plywood if I can find it, it's about $45 a sheet and I find it to be better quality that the maple or oak.
Let's see, for the construction of the plywood I used 1 1/4" crown staples 18 gauge and to apply the backing I believe I used 1 1/4" pin nails 23 gauge. Hope that helps! Thanks for watching!
92 Nails Just subscribed. Thank you for taking the time to reply to our comments and answer our questions. May your business continue to grow and your videos continue on TH-cam for us to enjoy. God bless.
Thanks for the video. It seems you can only staple in the bottom of the vertical dividers (except for the first and last) correct? Or, do you toenail in the top of the vertical dividers that are under an existing vertical divider? Please help!
Yes this is what I found too! What I did was staple the bottom of the vertical dividers that I could reach and then use pocket holes to secure the top. You don't need a ton of them since the weight of the shelf keeps everything in place pretty well! Hope that helps!
@@SamMacyDesigns I greatly appreciate your help. Do you have any vids on creating pocket holes. I'm a bit of a newbie at this level of carpenter! Thanks again!!
Two things. Are projects like these impossible without a table saw and 2) I've tried screwing into the side of plywood and it failed. Does your wood stay together because you use nails when you go into the sides of plywood?
Yes this is definitely possible without a table saw! I would recommend a circular saw with a good straight edge, you could even buy a long piece of steel from your local metal shop or scrap yard if you don't want to spend the money on a long level. And you're going to want to predrill the holes for the screws into the plywood to avoid splitting. I recommend a tapered counter sink bit, you can probably find one at your local hardware store for under $10
Why are people so mean? I enjoyed this video and figured out exactly what you’re doing. I’m adjusting the specifications for my size closet anyway so measurements wouldn’t have helped me.
I read the comments. No one was mean. We simply wanted more information. I too enjoyed the video and I’m glad you are able to use the information as is. However, we’re not all at the same level of expertise. Thank you 92 nails for the additional info. I hope you continue to post videos for those of us who are carpentry challenged lol. God bless!
Luz Sanchez thank you! I totally agree with what you just said. I think the comments he was referring to where the ones that I deleted, stuff like “this is the dumbest thing I’ve ever seen, etc.” I deleted about 6 negative comments that didn’t pertain to the video. But I made sure to leave everyone’s that we’re interested in the measurements and more details 😃
you are wearing your earplugs very inefficiently, it shouldn't be sticking out like that. i'm just saying this for your own benefit, it should be barely sticking out enough for taking it out later.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
PLANS NOW AVAILABLE! I've linked all of the plans in the video description. Included in the plans are a cut list and tips and tricks to help you along the way!
Should have shown how you screwed/nailed down the cross sections on top of each other. You have perfectly hidden that step in here
Can you share link?
Dude... You're a genius. You just taught me at least 3 game changing techniques. Sanding dowels with a drill, using a speed square with a circular saw, and of course the method of making floating shelves without expensive hardware. Thank you! Awesome work! 5:49
yeah that was cool
Really wish this was more instructional :\
ArtByCRiley plans will be available soon which I hope will help! This project was last minute and rushed so I didn’t get a chance to take my time and get the most out of it. There may be another one in the future!
Thanks for your patience, there are now plans available linked in the video description!
Same
I wish i could build like that. He made that so nice.
You can do it too! 😃
@@SamMacyDesigns totally. Invest in a pocket hole jig - even the cheap ones on amazon work great for any imagination.
O my God you built exactly wht I need for my heat press stuff great job I'm goner try to build mines
Thank you so much! Good luck with your build 😀
Awesome work! I am looking at options for my house that does not offer much storage 😫 I have never built anything before but want to try 😊
Thank you!! This should be a nice and simple one to get you started!
Thanks a lot this video is just what I was looking for!!!awesome!!
Glad it was helpful!
Love your music and your shop looks so organized cool video great
Thanks so much! I'm glad you enjoyed it!
I know what I'm building this weekend!
Definitely do it!!
wow, thanks for the video, I dont know how to do pocket holes lol. I also thought I had to buy long boards never dreamed you could use plywood, probably cheaper, also I like that you pre painted or primed it .
Thank you! Glad I could help! The nice thing is you can rip them to whatever width you want and if you need thicker pieces you can just stack and glue more pieces together
Love ❤️ the 🎵.
Thank you!
Solid mate!
Thank You!
So awesome, can't wait to make our own!!!
Love the videos! Keep up the good work!
Thanks so much! Will do!!
Subscribed just because your music choice is on point
Yes!! Thank You!
I love it this is nice I would like to make this. And I also love your style of music I’m over here jammin LOL🎧
Thanks so much 😊
Thank you for this vid. Thank you for your very laid back teaching techniques. We built these into two closets after moving from a 2400 sq. ft. home to an 800 sq. ft. home. They were life savers when it came to space saving and organization. Thanks again. Really do enjoy your helpful vids.
Ah thank you!! I love hearing that!!
I so know what you mean by that sizing down bit, done it a few times over the decades. Too much stuff and not enough house lol. Love these cubby shelves.
Dude can you make more videos? Your video style is so good!
Thank you man! Don't worry, I'm working on it!
Is there something else we can use if we don’t have a crown stapler? Can we use pocket holes on both sides, or would we have to countersink screws to make the butt joint? Would a brad nailer not be strong enough?? Rookie here, thanks in advance!!!
I think most of those options would work great! I would say any form of screw (pocket hole, butt joint, ect.) doesn't necessarily need glue but if you used a brad nailer I would just make sure to glue every joint and I think it would be plenty strong enough! The other thing that's a nice trick is to use pocket holes, but when you align everything, pop a couple brad nails it to hold the joint together before installing your screws.
@@SamMacyDesigns thank you for responding! Would it be possible to do pocket holes on both sides of the shelf inserts or would the screws interfere with one another from the other side?? I’m assuming that might be why you only used pocket holes on the top and not the bottom? Thanks!!!
I think you could use them for both sides, just makes sure you stagger the pocket holes, that should ensure they screws don’t run into each other. The only reason I used pocket holes instead of Brad nails for one side is because I was able to get my nailer in there to nail the butt joints but couldn’t for the other side. Pocket holes on each side will surely be stronger!
The 4mm plywood is called Luan.
Thank you!
6:46 big flex 💪🏻
Great tutorial! Plus...he's so handsome.
Thank you! 😊
So strong 💪💪
You know it! lol
@@SamMacyDesigns 😂😂😂 awesome job on that man 🤘🏼
Can I please have all the measurements for this please , I would like to try and build this ??
Thanks for your patience, there are now plans available linked in the video description!
Great tutorial and just what I was looking for - sturdy floating shelves that are pretty easy to make and, as a bonus, on a budget. Thanks! 5:21
What kind of wood did you use. I want to make these for my kids bookbags and coats.
This is made out of 3/4" birch plywood that you can find at pretty much any lowes of home depot 😀
I always wondered how some manufacturers get the nice smooth finish? Are they putting veneer over it?
Yes exactly, unfortunately I feel like the top veneer layer keeps getting thinner and thinner as time goes on probably due to cost. Old plywood used to have a nice thick layer and these days it tends to be paper thin
That was very helpful, Thanks for the video
Thank you!! I'm glad you enjoyed it!
Great build. Trying to determine what the proper width for each locker would be to allow for a hook on each side. Could you tell me how wide the unit is? I can divide it by 4.
Thank you! The lockers are 4 feet wide and the cubbies are 5 feet wide. That way the width of each locker and cubby is just shy of a foot
Really inspirational keep it up
Thank you Brandon!
Seems easy
Definitely!
Hi. I bought your plans but I don’t see a shopping list. How many sheets of 3/4” plywood will I need for each project? How many sheets of 1/4”? Thanks.
Good question! Not sure how I forgot to include that. It takes one sheet of 1/4" and two sheets of 3/4"
You are CUTE! It makes learning to make these much easier... hehe :)
Cat calling is better when the female does it...
Awww, she's in love the poor thing
Yea well... there's always a critic in the comment section...
I wish someone cat called me. But perhaps Idk what I'm getting into
Interested to know the technique you used with how you support the shelves. Is there a benefit to the way you did it over making interlocking cuts?
It mostly just saved time and I know not everyone owns a dato stack
Go blue!!!
Yes!!
Have you had any issues with that table saw? I was going to buy one but saw it had a lot of bad reviews so got cold feet.
Oh really? I’ve never had any issues! Although I will say I’m not a super nit picky guy when it comes to things being perfectly square and what not. I’ve seen videos where people break down the construction of things with machining squares and other tools to measure the quality of equipment. I think it’s worth way more than what I paid for it personally and it’s never let me down!
I like it
Thank You!!
Can you tell me more about the jig you have on top of your table saw? Or is it something else?
Hi Jeff. So sorry to be late on the reply. It is a cross-cut sled. Basically a piece of plywood and a 2x4!
What type and quality of plywood did you use in this?
This stuff was just labeled as "blondewood plywood" at my local Lowes back when I made this. The quality was amazing, I think it's 12 ply and I believe it only cost $35 a sheet at the time. Ever since I made this video I haven't been able to find it again 😢
Hey how much would you say this cost you to make? I guess just how much all that much wood would cost? My dad taught me all this stuff & I have all the tools I need so im def making one. I just wanted to know the wood situation lol. Reminds me of the cube shelving from Ikea. I just want to see if it would be cheaper to make one like this or buy one.
I made both of them for around $125 total, that includes the cost of glue and a box of screws. I found this plywood at Lowe's for around $45 a sheet so I think the cost of plywood in your area is going to be the determining factor! Hope that helps!
What stapler are you using here? Cubbies look great - I’m gonna adapt this for a smaller shoe storage for the mud room. Thanks.
This is the Bostitch crown stapler and I was using 1-1/4" crown staples! Let me know how the mudroom version turns out!
Will do! Thanks for the tool info. Also didn’t realize at first watch, but my weed whacker is currently being fixed at exit 18 equipment. Small small world, and smaller state if you’re in the 802. Thanks again and take care. Will let you know how it turns out and enjoy the fall while we’ve got it.
Cover the top part of his head and watch his mouth....it's The Rock.....lol
Great job! I liked this. Looking to build something for all my shoes and boots. Since you welcomed suggestions, one thing I would suggest is with the taller cubby type cabinet for jackets - have the seams of that thin plywood (i think it was Luan) land on one of your verticals. I noticed light coming through in the middle of the cubby where the seam was. Other than that - perfect! Do you plan on doing some edge banding or a finish to the raw edges? Or are they going to paint them?
Thanks Dave! I absolutely agree with that! I thought since they were going up against a wall that the seems would somewhat disappear but unfortunately they are still pretty obvious. You can still notice them quite a bit even without light shining through. And I won't edge band these ones since they wanted an unfinished look to match the other equipment in the gym but I plan on making a fancier version for our house and I will definitely be edge banding and experimenting with finishes! That's for the suggestions!
after the cubbie HOs are done DO a chatter cartrige BOX of conversations around to BING back and forth. anyone have any propofol and butterfly needles
How much would it come down too , to build a closet ?
Subscribed on this video👌🏽
I just purchased the plans.. how many pieces of plywood did you use on each piece?
Each piece uses two sheets of 3/4” and one sheet of 1/4” or whatever you choose to use as a backing material
@@SamMacyDesigns thank you!
One more question… what size pocket holes?
@@AlleyLoves hmmm I’m not actually sure! I just used a kregg pocket hole jig that I got from Lowe’s and I think everything Kregg makes is the same size. I used 1 - 1/4” #8 pocket screws if that helps!
I gotta try this! My garage is so cluttered right now lol 4:44
Ah I need
So glad!
Love how these came out could I ask what the material costs are ?
If I can remember correctly I think at the time it cost right around $150 to make both pieces. But that's when plywood was $40 a sheet
@@SamMacyDesigns arrrgggh true that $$$$$
what type of plywood is that
So you trimmed the backing after you stapled it in? Interesting.
Makes for a nice flush fit 😃
What's the type of plywood you used sir?
This was made from 3/4" baltic birch plywood with a 1/4" plywood backing
@@SamMacyDesigns thank you sir
Was this 1/2 in plywood or 3/4?
This is 3/4"
This is a FANTASTIC diy video! Exactly what I needed, thank you so much! 2:21
Hi what's the name of the board u use in the building of the cupboard plz
The 3/4" plywood is just the blondewood plywood from Lowes and the backer board is 1/4" underlayment.
Looks like the wood could split in that 2 x 2 on the ceiling and the whole shelf could fall. 4:34
How much time did you have in these 2 projects?
Probably two hours in the cubbies and three hours for the locker
I've never seen someone do floating shelves like this and I love it! These will be going up in my house soon. 5:14
Did you fill your pocketholes? I'm not seeing them in the final build
I didn’t! But it would look sharp if you did! I was under a bit of a time constraint so it wasn’t really an option but I might try it if I build more of these.
How wide do you normally cut the walls of these type of cabinets
Good question, I forgot to mention that! These ones are 12 inches deep, that fits up to about a size 13 shoe which is what I was going for.
@@SamMacyDesigns Sounds good. I am looking for a option like this in my sons room. Great video as normal! thank you very much and keep up the amazing work.
Thank Keith! I appreciate it!
What type of ply are u using?
This is just 3/4" blondewood plywood from lowes. I think it's a mixture of soft woods but I love it. It has more plys than the expensive maple stuff!
Where do you buy your wood? Plywood
Typically Lowe's! I usually shoot for their "blondewood" plywood if I can find it, it's about $45 a sheet and I find it to be better quality that the maple or oak.
If i were more like you and cleaned after portions of the builds, my shop might actually be clean. HAHAHA 5:46
did you use glue at all or is it all held up by staples only ?
All staples and some pocket screws, the backing keeps it from racking so they don’t get much stress. It’s worked well so far!
What size pin nails are you using? Length and gauge
Awesome video btw! Subscribed
Let's see, for the construction of the plywood I used 1 1/4" crown staples 18 gauge and to apply the backing I believe I used 1 1/4" pin nails 23 gauge. Hope that helps! Thanks for watching!
Obsessed with this! I want one!!! 5:45
I wish you'd dial down the production, and up the tutorial part.
You're not the first person to mention that lol, I've since dialed it back!
Would be nice to have material and measurements
Thanks for your patience, there are now plans available linked in the video description!
92 Nails Just subscribed. Thank you for taking the time to reply to our comments and answer our questions. May your business continue to grow and your videos continue on TH-cam for us to enjoy. God bless.
@@user-Elle41 thank you so much!
I love this video! I want to recreate it so bad! How long was the rope that you used? 3:36
Tran The Clever thank you! I’m not sure which rope you mean?
I thought I was a handy man and just got schooled! Professional job man! 1:26
What's a pocket hole?
Great question! Take a peek at this link, this is where I found out how useful they are 😀 th-cam.com/video/mvO6zaIUO18/w-d-xo.html
Thanks for the video. It seems you can only staple in the bottom of the vertical dividers (except for the first and last) correct? Or, do you toenail in the top of the vertical dividers that are under an existing vertical divider? Please help!
Yes this is what I found too! What I did was staple the bottom of the vertical dividers that I could reach and then use pocket holes to secure the top. You don't need a ton of them since the weight of the shelf keeps everything in place pretty well! Hope that helps!
@@SamMacyDesigns I greatly appreciate your help. Do you have any vids on creating pocket holes. I'm a bit of a newbie at this level of carpenter! Thanks again!!
did you square your project?
Yes! It helps to check square along the way
Can i just order it from you??
unfortunately no... I do have plans available though!
Actually I wanna buy😊
Good stuff, I was wondering how you did that 2:12
Two things. Are projects like these impossible without a table saw and 2) I've tried screwing into the side of plywood and it failed. Does your wood stay together because you use nails when you go into the sides of plywood?
Yes this is definitely possible without a table saw! I would recommend a circular saw with a good straight edge, you could even buy a long piece of steel from your local metal shop or scrap yard if you don't want to spend the money on a long level. And you're going to want to predrill the holes for the screws into the plywood to avoid splitting. I recommend a tapered counter sink bit, you can probably find one at your local hardware store for under $10
You call it simple. It is if you have the tools! Please do a minimal tools version
That’s a good idea! Thanks for the feedback
Nobody shows how to attach the shelves of the cubby in the middle
Glad this helped! Cheers 😀
Can I ask for the Dimensions?
The vertical cubbies are 3'x5' and the horizontal are 4'x6'. Hope that helps!
Can you share the measurements for the diy
Thanks for your patience, there are now plans available linked in the video description!
HD plywood
Why are people so mean? I enjoyed this video and figured out exactly what you’re doing. I’m adjusting the specifications for my size closet anyway so measurements wouldn’t have helped me.
Thank you thank you THANK YOU! I’m absolutely pumped it’s working for you and you’re able to tweak it so it serves you best! You give me hope haha
I read the comments. No one was mean. We simply wanted more information. I too enjoyed the video and I’m glad you are able to use the information as is. However, we’re not all at the same level of expertise. Thank you 92 nails for the additional info. I hope you continue to post videos for those of us who are carpentry challenged lol. God bless!
Luz Sanchez thank you! I totally agree with what you just said. I think the comments he was referring to where the ones that I deleted, stuff like “this is the dumbest thing I’ve ever seen, etc.” I deleted about 6 negative comments that didn’t pertain to the video. But I made sure to leave everyone’s that we’re interested in the measurements and more details 😃
I fell asleep because of the background music. Needs something with energy.
Good to know! Thanks for the feedback!
That was streamlined
Before you can even think of a diy project like this , you need to buy all of those wood shop tools first...
This can also be done with a circular saw and a straight edge! Or friends with tools!
What kind of wood are you using?
This is 3/4" blondewood plywood from Lowe's
measurements please
The lockers are 6'x4' and the cubbies are 4'x5'
What about the cubby size?? To know what size containers would fit
you are wearing your earplugs very inefficiently, it shouldn't be sticking out like that.
i'm just saying this for your own benefit, it should be barely sticking out enough for taking it out later.
Ah thank you for your concern! I've definitely upgraded since then!
Gay music
Shop
Manly music try
Metallica
who gives AF bout a phone pull round. ASHTON
What's yours nonsence
I'm not sure what you mean....
Annoying music
FYI - If you’re going to do projects, you need to list materials required & explain what you’re doing.
Thanks for your patience, there are now plans available linked in the video description!
Good stuff, I was wondering how you did that 3:28