Он трубу даже не прогрел,насрал сверху шов и все.провара нет.че за учителя ?ты ещё ток на 15 поставь,чтоб прилипало и говори а чё так плохо дуга загорается
Step 1: Run 16 tacs (don’t clear slag on any of em, why would you?) Step 2: Examine your porosity Step 3: Run a random bead over the top of prior faulty tac mess, 0 tie in with either pieces of metal you’re trying to fuse together Step 4: Get fired
@@Jking0005 Excellent answer. He needs to clean the joint and then get into the habit of running a series of consecutive cursive "e's" to tie both sides in with his puddle flow. The dude is dragging straight down the middle of the long line of tacks, not touching the metal on either side!!! & then videoing it showing it as TRUTH! Ugg!
А Вы хитрец как Я погляжу, когда Вы уложили второй слой, при очистке шва от шлака, мелькнул огромный свищь! Правда Вы так быстро оборвали ролик, что его можно заметить, только при замедленном просмотре!!! У нас у русских есть пословица: "Не можешь срать, не мучай жопу! "
@@user-DedPihto Причём тут время суток, Вы бы ещё обратили внимание на время года!?!? У Вас ампераж слишком высокий, попробуйте УОНИ-13/55 от "ESAB", держите заготовку под небольшим углом!!
Понабежали профессионалы Я вот только вчера первый раз в жизни пробовал «варить» и еще далеко от такого результата. Видимо не хватает понимания и опыта. А так на первый взгляд все элементарно и просто, оборудование хоть и простое но хорошее и исправное, современное.
I bet those stitch tacks didn't penetrate enough and i guarantee that second pass did no good whatsoever. Its not supposed to work like caulking a joint. Its welding... actually joining peices together by melting them evenly as deep as possible so that it's as close to one peice as possible. Not just some crap stuck mostly on the top...even if it looks '"good" to you... it's not.
@@GolfSux what weld process did you use? If you used stick welding please say you didn't use this blokes spot weld technique. 🙏🙏🙏🙏 And you can't weld body panels with stick welding. Well ya could reweld the factory spot welds if ya careful. But MIG is the best do everything weld process. It Welds allmost all steels and aluminium.
@@GolfSux I forgot to wish you well with ya build. I just worry when you say this dodgy as guy that only stick welds , very bady, inspired you to give it a go. Are you posting any videos or photos of your car on line? I am a fully qualified metal fabrication engineer of 30yrs and I could give you some pointers if ya interested. Using a jig is good so I think you may be ok. Enjoy the car mate.
@@RandomRants525 bro i bolted the bodie panels on u dont weld bodie to the frame......i welded the frame, moter mounts, and supenshion with a arc welder that uses rods....i used the tecniqe he uses in his videos
There's some sort of epidemic, tackers everywhere. Just spark and keep that arc running. If the material is too thin weld in direct polarity. Never pause, direct your rod (heat) to the thickest or longer material and just let the puddle do the rest to catch the other part so you don't end up putting a hole in it.
@@Владимир-с6т6ф Reverse polarity: clamp (Negative), rod (Positive) electrons flow from the part to the rod (Rod heats up 70%, the part 30%). Direct polarity: clamp (Positive), rod (Negative). Electrons flow from the rod to the part (Rod heats up 30%, part 70%). Using direct polarity you can weld thin materials easier because the rod doesn't heat so much and you don't end up melting your part.
@@gilmarlandim9267an amateur can tell you that weld is garbage strictly because of his tacking the joint closed first. Trapped slag and shit all inside the weld and base metal. Whatever happens after that is still garbage because he didnt fix the first mistake he made, just covered it up
Вы хоть сообщайте субтитрами какой металл толщиной варишь и какой диаметр электрода и название его. А то мелькнул электрод и догадайся сам. И толщина металла ещё догадайся. Одни загадки...🙄 На видео металл наверно толщиной 1,5мм, а электрод наверно ⌀2,6мм и марка электрода 6013.🤔
Because it is the wrong way, and that makes everyone comment, and artificially creates attraction to the video. It's a way to get more interaction, which affects monetizing.
@@andrewgjenningsniiice, i gotta remember this trick so that I can forget it because there’s nothing spectacular I can do for the world to like what Im doing…so thanks…thanks for Nuffin maaan 🤨
@@edwardneuman6061first pass is supoosed to be a bit colder to avoid burning through. Second pass is supposed to be nice and hot to burn out any remaining impurities, hence the name “hot pass”
True, but you wouldn't be getting better monetizing results. People always get comments when something is bad, but nearly as many comments when something is good. This is how you play the game. It's not about the quality of the weld, it's about getting people to interact.
Please post a vid of your magnificent welding skills. We would all be thoroughly delighted to witness a true master welder at work. You armchair experts can do it all!
@@andrewgjenningswhat are you on about? You just said exactly what this guy has done. Its bad welding, so hes called it out. If it was good welding you would see praise
No entiendo porque hacer punteada la soldadura y todavía queda un poro ...y luego hace un disque cordón y queda peor.....ni cuando estaba en la secundaria hacia yo ese mugrero...😂😂😂😂😂😂😂 Bye
Dude just no... Your final "pass" did nothing and finishing my inspection class I can tell at least 3 surface faults with the bad camera and quick cut off end, and I don't even want to see what lack of fusion you have. Dude stop welding you are teaching people very bad habits and it just doesn't look that good
Здравствуйте! Я начинающий самоучка. Хочу поинтересоваться у Вас, существуют ли какие,либо средства для облегчения розжига электродов УОНИ? А то на моем аппарате горячего старта нету, а токопроводящая подмазка на торце электрода, которая должна помочь зажечь электрод, не справляется с задачей. Пшикнет раз и всё. И нет её. А дуга так и не успела загореться. Пока обхожусь металлическим порошком из-под заточного станка. Сыплю щепотку в начало стыка и сую электрод в неё. В большинстве случаев, дуга нормально загорается. Но такую подсыпку не везде можно применить.
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
Please don't weld on anything that runs on the roads
Он трубу даже не прогрел,насрал сверху шов и все.провара нет.че за учителя ?ты ещё ток на 15 поставь,чтоб прилипало и говори а чё так плохо дуга загорается
@@исраэль-с9д ENGLISH!!!
@@leshenderson5746Google translate
@@leshenderson5746переводчик
Lmaooo
The day this guy completes a full weld in one run will be a great day
Imagune
Для начала он прошёл корень, ( фундамент) а затем он положил основной шов!
Make a video doing it sir
Seriously
@@Abdul_Vahid555 всё правильно он сделал
Step 1: Run 16 tacs (don’t clear slag on any of em, why would you?)
Step 2: Examine your porosity
Step 3: Run a random bead over the top of prior faulty tac mess, 0 tie in with either pieces of metal you’re trying to fuse together
Step 4: Get fired
Apparently step 5 is go on TH-cam and teach clueless Joes how to make really really bad welds, and get paid for terrible advice.
@@Jking0005
Excellent answer. He needs to clean the joint and then get into the habit of running a series of consecutive cursive "e's" to tie both sides in with his puddle flow. The dude is dragging straight down the middle of the long line of tacks, not touching the metal on either side!!! & then videoing it showing it as TRUTH! Ugg!
The tubing is NOT so thin that you can't run a stringer bead without the spot welds ⚡
That's what I'm saying they all do that
Not if you don't know what you're doing lol
@@Oreguns85 That is obviously the case here !!!
Mas a espessura do metal aguentaria o calor ????
@@YKAIDYeso es lo que estan diciendo, lo aguantaria
I love these, they're so bad it's funny. like someone that bought a used welder and has no clue what he's doing but is making tutorials on youtube
Для начинающих сойдет, но профи сваривают гораздо лучше.
Sube tu video para verlo.
@@EXPLORADOR68они делом заняты, тикток войска у в другом направлении работают
А Вы хитрец как Я погляжу, когда Вы уложили второй слой, при очистке шва от шлака, мелькнул огромный свищь! Правда Вы так быстро оборвали ролик, что его можно заметить, только при замедленном просмотре!!! У нас у русских есть пословица: "Не можешь срать, не мучай жопу! "
Как говорил мой батя.,, Это или нарыгали или насрали,,😂
хахаха
Так точно с пословицей 😂
Тоже заметил😂😂😂
@@user-DedPihto Причём тут время суток, Вы бы ещё обратили внимание на время года!?!? У Вас ампераж слишком высокий, попробуйте УОНИ-13/55 от "ESAB", держите заготовку под небольшим углом!!
I may not be an expert, but that last pass appeared cold
Thats why ur not an expert. The weld is fine.
@@cravenm.2295 if this weld is "fine", mine as a beginner must be one of the top 10 world's best welds.
@@cravenm.2295 Fine on visual but lack of strength
Glad everyone is on the same page as me. Just keep welding!
Não perco um vídeo seu!
Aprendo com quem sabe.
Я самоучка. За всю жизнь израсходовал около 8 килограмм электродов. Мне простительно сделать такой шов. Но демонстрировать это людям - нет.
Понабежали профессионалы
Я вот только вчера первый раз в жизни пробовал «варить» и еще далеко от такого результата. Видимо не хватает понимания и опыта. А так на первый взгляд все элементарно и просто, оборудование хоть и простое но хорошее и исправное, современное.
A ese electrodo le das poco amperaje más teniendo en cuenta que sueldas a puntos de ahí que la soldadura sea endeble y que después coqueras
Top. Gostei da instrução
Welds like that are why you lost the war.
LOL
Welds like this got them millions of active viewers
I bet those stitch tacks didn't penetrate enough and i guarantee that second pass did no good whatsoever. Its not supposed to work like caulking a joint. Its welding... actually joining peices together by melting them evenly as deep as possible so that it's as close to one peice as possible. Not just some crap stuck mostly on the top...even if it looks '"good" to you... it's not.
Варить такие стыки надо за один проход , правильно подобрав напругу , тут и металл не слишком тонкий да и зазоров нет 😊
I'm pretty sure this guy welded on titan submersible.
На втором проходе ток всегда больше нужно выставлять! Всё равно лайк, уважаю трудяг.
Thank you so much. Ive been watching ur videos and started welding my frame for my 34 ford. I couldnt have done it without u bro
Do not use this guys welding as any sort of welding guide. Especially on a car mate. Unless you want it to be a dangerous piece of crap.
@@RandomRants525 its holding fine i made a jig and weld the frame perfict. I welded the moter mounts in and the chevy moter is in and it looks goode
@@GolfSux what weld process did you use? If you used stick welding please say you didn't use this blokes spot weld technique. 🙏🙏🙏🙏
And you can't weld body panels with stick welding. Well ya could reweld the factory spot welds if ya careful. But MIG is the best do everything weld process. It Welds allmost all steels and aluminium.
@@GolfSux I forgot to wish you well with ya build. I just worry when you say this dodgy as guy that only stick welds , very bady, inspired you to give it a go. Are you posting any videos or photos of your car on line? I am a fully qualified metal fabrication engineer of 30yrs and I could give you some pointers if ya interested. Using a jig is good so I think you may be ok. Enjoy the car mate.
@@RandomRants525 bro i bolted the bodie panels on u dont weld bodie to the frame......i welded the frame, moter mounts, and supenshion with a arc welder that uses rods....i used the tecniqe he uses in his videos
Why are you start stop start stop on the weld? Spark it and keep the arc going.
Makes for good videos apparently
Because thats a thine metal
Stick welders often do that
Try that on a 1.2 mm tubular 😅
There's some sort of epidemic, tackers everywhere. Just spark and keep that arc running. If the material is too thin weld in direct polarity. Never pause, direct your rod (heat) to the thickest or longer material and just let the puddle do the rest to catch the other part so you don't end up putting a hole in it.
дружище сними пожалуйста видео,п рямая полярность--это электроны летят от электрода?
@@Владимир-с6т6ф
Reverse polarity: clamp (Negative), rod (Positive) electrons flow from the part to the rod (Rod heats up 70%, the part 30%).
Direct polarity: clamp (Positive), rod (Negative). Electrons flow from the rod to the part (Rod heats up 30%, part 70%).
Using direct polarity you can weld thin materials easier because the rod doesn't heat so much and you don't end up melting your part.
@@therealfocusinспасибо, но по логике должно наоборот.теория с практикой не совпадают, ещё раз спасибо
Thanks for your good suggestion
BRAVO!
あなたは本当にとても素晴らしい職人です👍👍👍👍👍
profil kalınlıgına göre kaynak yapılışını göstermeniz çok güzel emeginize saglık teşekkürler
Your weld probably has high porosity.
Not probably, definitely
Нужно было дырку сначала заварить , потом второй шов. Брак
Good 👍
You've got pinholes in your weld
Because he is not a welder 💯
@@gilmarlandim9267an amateur can tell you that weld is garbage strictly because of his tacking the joint closed first. Trapped slag and shit all inside the weld and base metal. Whatever happens after that is still garbage because he didnt fix the first mistake he made, just covered it up
У него дырки в других местах тоже... 😊😅😂
Love all the 17/hr welding 👍
I’m convinced that this guy welds garbage on purpose so we comment and view his videos.
Kinda genius if that’s the case.
Pra quem está buscando aprender a solda de eletrodo revestido, esse NÃO é o vídeo ideal...
Qual é problema? Baixa amperagem?
❤❤❤❤nice idol
Buenos consejos para soldar 😊
Soldó 2 veces y siempre dejó poro 😂😂😂😂😂😂😂😂no puedes amigo aplasado
Nice ☺️☺️☺️
Multiple spots to keep it square then weld until stick is gone or at the end of the metal to be welded.
Отлично!
Вы мастер по корневым швам!
Вы хоть сообщайте субтитрами какой металл толщиной варишь и какой диаметр электрода и название его. А то мелькнул электрод и догадайся сам. И толщина металла ещё догадайся. Одни загадки...🙄
На видео металл наверно толщиной 1,5мм, а электрод наверно ⌀2,6мм и марка электрода 6013.🤔
😢ôi lỡ nhìn rồi, tối nay lại đau mắt rồi 😢😊
Даже рутилкой этот шов варится без отрыва легко и красиво. Опыт 28 лет 5 раряд, НАКС.
А ничего что у него именно рутиловый электрод 6013
Сварщик от бога! 🎉🎉🎉
А раковину, всё равно не закрыл,не канает такой метод
Та он даун, второй большим током надо, шлак выгонять чтоб. Да и первый шов как валенок кладёт
Why is almost every weld short I come across is always a dude string tacking it, JUST LOWER THE AMPERAGE AND RUN A FULL BEAD
That's boring
Thanks for the video. ❤
У Вас дуже змістовні відео.
Спасибі.
yet another "how not to weld" video. thx
Ala primera soldadura que pegaste cuanto le pusiste al fuerza de arco !!!
Your videos bring a joy to my life, thank you for your hard work. I appreciate you.
Very good!!!
Perfect ❤❤❤
Why didn't you continuous weld it?
Es bruto
First pass he had amps set to high, hence the hole. He lowered the amps on the second pass, and was able to weld continuously.
Because it is the wrong way, and that makes everyone comment, and artificially creates attraction to the video. It's a way to get more interaction, which affects monetizing.
@@andrewgjenningsniiice, i gotta remember this trick so that I can forget it because there’s nothing spectacular I can do for the world to like what Im doing…so thanks…thanks for Nuffin maaan 🤨
@@edwardneuman6061first pass is supoosed to be a bit colder to avoid burning through. Second pass is supposed to be nice and hot to burn out any remaining impurities, hence the name “hot pass”
honestly with that gauge of steel I love oxy-act its such a pretty weld
aside from other comments i just wanna ask,
low amps sude use high voltage right?
what voltage then for 50 to 70 amps?
Si yo soldo con ese amperaje me queda nuy grueso la soldadura , siempre tengo que ponerle mas de la recomendada aque se debe ? Sabes
Yo quiero aprender a soldar, pero imagino que podría ser por usar un electrodo de mayor grosor al apropiado para lo que vas a soldar.
@@AlfonsoGothic tal vez , deberías intentar a soldar y practicar. Y verás que pronto estarás soldando mi amigo
@@Videosdiarios-30 Si quiero empezar este mes si es posible, pretendo ir a algunas clases para empezar de buena manera y después a practicar.
👍👍👍👍👍👍
Te Falta Calle😂😂😂😂😂😂😂😂
Don't let this man near a welding machine! Ever!
Daria pra fazer em 1 cordão só direto
E no 90
Esses vídeos da Internet sempre mostram anperagens muito baixas , não sei pq
Que tipo de soldadura para perfil calibre 18 Y 20
Mantappp bang
OKe bos,
Welder my ass!!! If I tried that I would be fired quick.
True, but you wouldn't be getting better monetizing results. People always get comments when something is bad, but nearly as many comments when something is good. This is how you play the game. It's not about the quality of the weld, it's about getting people to interact.
Please post a vid of your magnificent welding skills. We would all be thoroughly delighted to witness a true master welder at work. You armchair experts can do it all!
@@timrussell1559 I'm not an expert, I only made a living at it for 50 years. 72 y o now!
Bro!! 100%
@@andrewgjenningswhat are you on about? You just said exactly what this guy has done. Its bad welding, so hes called it out. If it was good welding you would see praise
He’s got to be doing this to piss people off at this point 😂
is that steel or aluminum
Máquina totalmente desregulada 😅
Glad this channel is popular, gotta show welders what NOT to do
terima kasih atas ilmu nya,🙏
Despo que faço a rais eu almento os amperes para finalizar a solda vc faz de outra forma 😅😅
No entiendo porque hacer punteada la soldadura y todavía queda un poro ...y luego hace un disque cordón y queda peor.....ni cuando estaba en la secundaria hacia yo ese mugrero...😂😂😂😂😂😂😂 Bye
De cuánto es el electrodo???
Ещё пару слоев положи, может про варишь😂
Brutal as always. Learn to weld!
I like how he tickles the steel tubes before he starts welding
При такой идеальной подгонке с одного прохода заварю, лучше бы показал с зазорами в пол сантиметра и больше как варить
Bravissimo😊
It worries me that newbs will all think this is welding
when ancient egyptians first learned to weld:
I'd be fired so quick if I did this shit at work haha
Same 😅
I feel compelled to mention that hole in the initial bead was not great, second, the cap does not cover up that void.
Dude just no... Your final "pass" did nothing and finishing my inspection class I can tell at least 3 surface faults with the bad camera and quick cut off end, and I don't even want to see what lack of fusion you have. Dude stop welding you are teaching people very bad habits and it just doesn't look that good
3mm thickness and up only you can weld with SMAW easily
In that joint you can run a full uninterrupted bead
Excelente serviço
When you are not a welder😢
Insufficient penetration... and i wonder how many times he has heard that.
Dude just knows how to tack
Rosa corros, no necesitan más explicación, son geniales
I know nearly nothing about welding and even I can tell you, you don't start and stop like that. Continous consistent weld would seem stronger to me?
Porque todos los que critican y corrigen, no hacen un video de como si se deberia de hacer, asi todos aprendemos. Lo importante es compartir. 👌🏽
🥰🥰🥰🌹❤️❤️
Я варю уони, там шов свегда нормальный, и в отличии от рутиловых многократно крепче.
Здравствуйте! Я начинающий самоучка. Хочу поинтересоваться у Вас, существуют ли какие,либо средства для облегчения розжига электродов УОНИ? А то на моем аппарате горячего старта нету, а токопроводящая подмазка на торце электрода, которая должна помочь зажечь электрод, не справляется с задачей. Пшикнет раз и всё. И нет её. А дуга так и не успела загореться. Пока обхожусь металлическим порошком из-под заточного станка. Сыплю щепотку в начало стыка и сую электрод в неё. В большинстве случаев, дуга нормально загорается. Но такую подсыпку не везде можно применить.
Should have paused on the final result because you captured it like for millisecond, was it that bad ?😂
Good job
This has nothing to do with good welding
Very nice
Inverter name?
How about running a grinder to remove the mill scale. A 45-degree bevel on the smaller tubing
Ha they rolled the bead on the second pass too🤣
Why lower the amp on your "hot pass"?
Pangalawang weld m la Ng kwenta,..ganda Nung una ..kapit n kapit n un ..ung pangalawa hilaw ....parang la lang..hhahahha