How to Replace Windshield Washer Pump 98-10 Audi A4
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Buy Now!
New Windshield Washer Pump from 1AAuto.com 1aau.to/ic/1AWW...
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, or failing windshield washer pump. This video is applicable to the 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 Audi A4
This process should be similar on the following vehicles:
2004 Audi A4
2005 Audi A4
2006 Audi A4
2007 Audi A4
2008 Audi A4
2009 Audi A4
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oju/1AX...
• Phillips Head Screwdriver 1aau.to/oju/1AX...
• 10mm Socket 1aau.to/ohW/1AX...
• T25 Driver 1aau.to/oby/1AX...
• T30 Driver 1aau.to/oby/1AX...
• Ratchet 1aau.to/okj/1AX...
• Socket Extensions 1aau.to/ojh/1AX...
• Swivel
• Windshield Washer Fluid
• Flashlight 1aau.to/oj/1AXA...
• Floor Jack 1aau.to/ocP/1AX...
• Jack Stands 1aau.to/ocA/1AX...
Subscribe: / @1aauto
Check out our playlist:
Audi A4 2004-09 3rd Gen (B7): • Audi A4 2004-09 3rd Ge...
For More Info visit us at 1aau.to/h/uP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I give these guys an A+ for effort and for producing a clear and instructive video. BUT.....on my 2007 A4 there is a MUCH SIMPLY method of changing out the windshield washer pump. PROBABLY SAVE 75% TIME. Remove left wheel. Jack left front of car safely. Remove the large plastic tray that covers the lower engine compartment. Remove left front inner fender liner. You can now get a pretty good look at the lower windshield washer tank. Remove the black plastic brace that goes across the lower part of the tank. Remove a couple of the lower bolts/screws holding the tank to the frame. You can now gently bend the tank where you can get your hand on the windshield washer motor. Remove the top electrical connector. Get a drain bucket and slowly remove the output hose going from the motor, the tank will drain (takes time...). Now pull the windshield washer motor up vertically and it will pop out of the lower rubber grommet. Get your new replacement motor and reverse the removal process. That's it. You do need a 10mm socket and wrench as well as some #25 or #27 Torx bits.
Only need to move the driver side inner wheel lining reach in and pull it out takes 5 minutes start to finish
Thanks for the tip and for watching! +chase7317
Great :) Thanks for the best way to do this work all cred to you @chase7317
not on the a6. it has 2 pumps and totally sucks...
I DID MINE JUST LIKE YOU SIAD ,OR JUST DO IT FROM THE ONDER THE CAR , IS RIGTH THERE
This video is not the easy way!
Remove left wheel
Remove front part of inner fender, push back to gain access
Remove plastic lower bracket gray in color about 6 inches long
Remove 3 #10 bolts holding on water bottle
Carefully remove white bottle containing washer fluid, pushing down, to disconnect from upper bottle( you might want to empty washer fluid )
There is your hoses,electrical connections, Replace the smaller motor for windshield washer
No more than 45-60 minutes time
I usually base my car choice on what it needs to carry, and accessibility and locations of parts. Glad I haven't got one of these but sorry for a pal that has
is mush faster taking the wheel out and the plastic cover ,4 screws and the water tank is out ,and you are done 10 minute job ,i just did it on my 2002 audi allroad ,no need to do all that
Great vid but crazy that one must do all that just to replace the pump. There must be an easier way.
Think I would test before reassembly
I think I would add the wash fluid before reassembling....
I would be crazy doing it myself
How to unclog Audi A4 2007 windshield wipers to get the fluid coming out? I got the washer fluid reservoir replaced but for some reason the fluid does not come out.
+Karen Avila Could be a problem in the windshield washer module. Try disconnecting the negative terminal of the battery for 10 mins and see if that resets everything.
Stop reading the repair manual. That is designed to give German unions something to do.
You just need to jack the car up reach up and pop the pump out. You don't need to remove anything unless you still have that stupid catch pan on your car.
You guys make very informative, thorough videos.
What a complicated project to replace such an insignificant part.....
I think I will leave it as it is.
+Kenneth Rivas Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
It takes more than 15 min ,to remove this thing ,and next time i 'll remove the headlight assembly.
7:16 where does the wire that is at the bottom left go to. It’s an electrical component that we can not seem to find where it goes thank.
You have got to be kidding me :/
For real men all that just for a pump replacement wow
This video is not fo a 09 and 10 Audi A4. 2009 is the first year of the B8 Chassis. This video isn't even close for the A4 B8. I know as I tried. The reservoir is in a completely different location.
+David Bervig Thanks for the feedback!
my Audi b6 i change with only remove the Headlight
My sister has a 2003 b6... thanks for the info. I hate removing the bumper, ugh.
I just pull the engine and get to it from the side
Pain in the ass good grief
Defiantly is wait time just remove driving light driver side remove radiator cooling switch and boom there is hands gone essay true passion Don't remove the bumper it waist time and also old cars plastics clips it a pain all way broke some good look guys
10mm socket. Darn no one can fix this
How much would this cost if taken to a mechanic
Yes
Where is the fuse for this?
you can just remove the head light to get to it as well.
I only had a little leak on my window washer...Instead, its a ..." How to do a heath robinson window washer repair DIY!!! You've got to be kidding, mate!!! I'd much rather buy a new car than trying to fix a hole in my window washer!
Hi shure bye a new car fine..... Do you service your vehicle sometime ?
People work with cars and need to know how to fix them !
And this is an example how to do the repair by your self, i dont think the perpose was to let you do the repair eather your car or anything else !
But dont care drive your new car without service or reparation, it´s you who paying the price when your new shiny car break down... And buy a new one every time your out of gas too :P
U are Completly the wrong man on the wrong planet! Please dont answer you make your self a bigger fool then !!!
Thank you for the video guys !!
very easy to access???????????????????????????????????
Bolllcks it's going to the garage
+Mod 66 Thanks for the feedback!
Easy access. Lol. ? Habe to take the whole front end out for this. Pathetic. Thanks Audi another disspointment.
Ridiculous