just give an update on the risers... I went for a ride after this vlog was made.. WOW the risers have made ridding more enjoyable.. and it was outstanding before
@@gokusupersaiya8067 I am 175 and they are great. I fitted a set on my bike and really it feels like I am on a light dritbike. Elbows nice and bent shoulders relaxed. Also pain in shoulder gone.
i know this is an older video but i noticed you put the risers on the wrong way round, the indent is supposed to face outwards not inwards according to the instructions but if they have lasted this long it obviously not an issue
Thanks a lot for the great video ! Just one question could you tell me what’s your height ? and which version of the risers you installed, Wunderlich Ergo+ 38mm (38mm rise and 27mm pull-back) ? Thanks a lot
You should have moved the bars from lock to lock, to check for cable clearance 🙄. I know they say the standard cable length is fine, but for safety you should have checked 😉
I noticed that there is a gap between the upper and lower clamp (at the bottom bolt) Mine is like this too -is it normal to have gap between the two clamps when fully tightened?
just give an update on the risers... I went for a ride after this vlog was made.. WOW the risers have made ridding more enjoyable.. and it was outstanding before
what is your height? my height 174 cm .
my height is 180cm
@@gokusupersaiya8067 I am 175 and they are great. I fitted a set on my bike and really it feels like I am on a light dritbike. Elbows nice and bent shoulders relaxed. Also pain in shoulder gone.
i know this is an older video but i noticed you put the risers on the wrong way round, the indent is supposed to face outwards not inwards according to the instructions but if they have lasted this long it obviously not an issue
The brake cable, turning the steering wheel all the way to the left in the lock position is not a problem? There is a solution; Thanks!
much more comfortable happy days but I had to move my cables to the outside of the folks to stop them from being damaged.
Thanks a lot for the great video !
Just one question could you tell me what’s your height ? and which version of the risers you installed, Wunderlich Ergo+ 38mm (38mm rise and 27mm pull-back) ?
Thanks a lot
Спасибо, очень понятно.
HI would be rising my bars up and back affecting my tank bag when turning my handlebars
You should have moved the bars from lock to lock, to check for cable clearance 🙄.
I know they say the standard cable length is fine, but for safety you should have checked 😉
Hi Steve. Thanks for the comment. You are totally right. Unfortunately I forgot to put that in the video. Appreciate the feedback. Ride safe buddy.
You cant get these in the US?
Good top tip xx
Glad you liked it
Great video...thank you. Do you have the Wunderlich part number available? Thank You
Hi sorry no.. these we're bought from nippy Norman's
I noticed that there is a gap between the upper and lower clamp (at the bottom bolt) Mine is like this too -is it normal to have gap between the two clamps when fully tightened?
Yes, the upper one should be tight to the bar, and the lower clamp should have 3mm gap :) this is what introduction book tells.
Which torx is needed for this job?
I thought you said, 'Welcome to Gay Talk'! Thought I'd come to the wrong channel! LOL!
I thought I heard the same..
is your front break tubes and cables been stretched by front fork ?
mine did and I had to move them to the outside of the folks so as not to damage them ok now.
hi jie su. we’ve done this on this bike and a 2017 gsa and haven’t needed to move the cables on either bike. hope that helps. thanks for the comment 👍
how was your cables were they impeded at all?
Hi Phil. Sorry for the delayed reply. Happy to report there are no problems with the cables. Everything works as it should. 👍
Great
glad you liked it. thanks for watching. 👍
Just going to ask the same question about the cables.
I’ve got long arms… mine are perfect
read the instruction before put the video!!!! very bad men
Sorry man, very bad instruction you did to everybody. Is BMW no a Triumph
Why didn’t you use a torque wrench? I NEED to know how to use one...as long as I don’t break a nail 😘