Can we get this Fluke 79III DMM back working?
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2021
- In this video we take a look at a Fluke 79 series III that is not powering on. After we replace the battery we end up on the other side of the spectrum and the meter is not turning off. Can we get this super nice Fluke DMM back in operation? It will be some BONUS troubleshooting at the end of this video that may help someone with the same issue with theirs. Hope you find it helpful and thanks for watching!
Fluke Service manuals (general search):
www.fluke.com/en-us/support/m...
Fluke link to 79II service manual:
dam-assets.fluke.com/s3fs-pub...
Fluke link to 79III Calibration:
dam-assets.fluke.com/s3fs-pub...
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
Jewelers Screwdriver set if needed: amzn.to/3THDqwd
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
150W Load Tester if needed: amzn.to/30i8sn8
Board Holder if needed: amzn.to/3881akA
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hep...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att...
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/gri... - วิทยาศาสตร์และเทคโนโลยี
Great editing. No fluff. Thank you for this great reference.
Very informative. I got the information I needed. Thanks
great video thanks for info
Very nice video sir
So it seems that possible problem was under the metal shielding of processor. Probable short on pads of ic? You got lucky there. Thanks for the look.
Hi ! Thank you for showing us the inside of the old Fluke 79III. Do you know in what year it was first released? I was surprised to see that the newer 17x series or the 77iv model does not look very different.
I believe it was 1997. They are similar in some ways for sure. The 179 did take the 79s place so it's just a few changes and you can still see the similarities. Thanks for your comment!
Good
Very nice work! I have considered buying a used Fluke off eBay, but worry I might get someone’s junk. Have any experience buying a used one?
Most of the ones I have as used. It does depend on how they have been treated, but they are made very well.
I have bought several of the original 87s used off of ebay and after disassembling and cleaning them up and putting in new batteries each of them is spot on.
Thank you for the video.
I have a 179 where the continuity beeper and backlight doesn't work .
I've heard this is notorious because of a film on the PCB.
Any suggestions?
It measures fine otherwise
I actually have (2) Fluke 179 DMMs and no issues with mine to say for certain. I have not heard of issues with them. I have had both of mine for around 15 years and bought them used. I think the 179 has the piezo disc on the back of the housing. I would at least check the buzzer, since it is just spring contacts connection when the housing halves go together and check for alignment and that the contact springs are still in place. The backlight I am not sure about without simply looking into it when or if the problem arises. Best of luck to ya and thanks for your kind comment!
@@ThriftyToolShed Would you be willing to try and fix it?I would pay all costs and make it worth your worthwhile.
Maybe even upload a video of you tearing it down.
Let me know if your interested
If not thanks anyways.
@@brettwest1963
I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in an Industrial job and try to have time to edit videos to post. I try to help by posting what I have found with a repair as we learn together. I don't have a lot of time left. I seem more behind than ever. I wish you the best of luck with yours.
My fluke 187 has a problem in ohm meter function. It is unstable example if I mesure resistor 10Kohm 1% but it's running around 8K to 11K. Any suggestion for this problem.
thank you
I would check for loose connections first. Including leads, leads jacks and solder joints along the signal path on the board. If you find nothing obvious then I would check really well for corrosion. Then next I would look at the calibration manual and go through it and you may possibly be able to narrow down if an adjustment could be an issue like cleaning a potentiometer really well etc. A calibration manual can be found on the Fluke website. www.fluke.com/en-us/support/manuals
❤
hello....! what is the component above the 11A fuse........?
I mentioned in the video that I had to use the series II manual it is close on some detail, but not all. The calibration manual is all I could find on the series III.
Where I can found that dial switch ? Have one with broken, even one part of switch is missing .
Well I believe they have been out of production for a while now. I have seen one here and there old stock for sale. I will say they sometimes are over $80. It is my experience to be patient and find a donor meter with a good switch? I know the 79-2 is very similar, but not sure they are exact.
@@ThriftyToolShed thanks for info. I think maybe 26 III have same dial becouse is use same manual. Will try to found doner.
@@FuriousHondaBoy
Yes the 26III is very similar.
Hello my friend? I need the 233 fluke diagram. How can I get it? Thanks.
I don't believe they have it available. All I see is the users manual and the calibration manual. That is around the time Fluke stopped sharing the service manuals I believe.
My fluke 77 is just displaying 888888 what could be the problem and what can be the solution
Almost seems like it is still in the self test mode on power up. If you have already tried the obvious like fresh battery and any visible corrosion and cleaning the board doesn't help you may want to look at the EEVBLOG forum on this issue. I know they have a lot of threads on Fluke issues and I have not seen this exact issue except corrosion or weak battery. Best of luck to ya!
I have been attempting Antique Radio repair as part of my post mid life crisis. Anyway, I have a Fluke model 117 that has worked like a dream for years, until recently the ohms function has been very unreliable I either get it to read or not at all. either a reading or OL . It has good probes. and the parts are clean, like a new resistor no matter how much pressure or movement on the part it just will not read. All other function seam to work just fine. Any ideas?
Sounds like fun. I have not worked on the 117 to say for sure. I will simply mention the same things I would check on a 179, 87 etc. You know the leads are good, but I also have seen a bad connection at the jacks before sometimes a bad solder joint and other times in the case of the 87 the jack itself had broken and connection was intermittent. The only other thing I have seen is the rotary switch itself be an issue with a bad connection.The 87 will even pop loose from the back (plastic push tab) and loosen up the down pressure on the contacts. Hope you have fun with the radio restoring and best of luck to ya! 📻
Hi. I have a fluke 77 that sounds when I select the continuity function with not leads connected. I checked and I found this part broken drive.google.com/drive/folders/1IYKnqIpnDW1cQxQynd608evI36eL2aOf?usp=drive_link Do you know what part it is?
It looks like the precision resistor network is broken. It's the white rectangular thin device that is usually blue on the other side.
@@ThriftyToolShed Hi, thanks for answering. It is like you say. Is it possible to find that part for replacement?
@@javierrodriguez6877
Maybe on eBay? I don't believe they are still available from fluke...