Sorry to be off topic but does anyone know of a trick to get back into an instagram account? I somehow forgot the password. I would appreciate any help you can offer me
@Caspian Damari I really appreciate your reply. I got to the site on google and I'm trying it out atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
Hey, I love your content so much, today,my lecturer uploaded a link on our eLearning platform and I'm here to say hi,have watched almost all ur contents in surveying, pliz upload some tacheometry work
Sir how did you calculate Radius from Deflection angle ???( you said it is obvious 400 if deflection angle is 60 degree ) 1720/60 is not equals to 400 please help sir
hi... dear 1720/D, here D is not deflection angle, its degree of curvature. however if you look into my video 400m as radius and 60deg as deflection angle are assumed for calculation purpose. remember deflection angle and degree of curvature are two different things......
Master ji proper Angle me drawing banao draw with 90angle set square . Looking exact right angles are very important and must .See offsets meeting on curve looking less than 90 degrees.
Could you not lay out this same curve just using good taping methods and swing the tape while setting markers on the curve? I just don't see why you would need any complicated math to do this except for maybe a scale greater than 60 meters.
I have uploaded few more methods of setting out a curve. All of them are useful. For example there can be obstacles on site so we switch into another method.
@@Sulimankhanacademy Thanks for the reply, yes it makes sense that obstacles could cause you to change over to another method. I have seen a few curves cut out through sold rock I bet that took some good planning, cheers to you from the USA.
iam from srilanka i said "its little difficult to understand your Arabic+English slang to me by the way you done a good job its very useful to engineering students like us
You have explained simply what I had previously
found to be a tricky subject - thankyou !
Welcome infinite
Sorry to be off topic but does anyone know of a trick to get back into an instagram account?
I somehow forgot the password. I would appreciate any help you can offer me
@Braylen Johnny Instablaster :)
@Caspian Damari I really appreciate your reply. I got to the site on google and I'm trying it out atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Caspian Damari It worked and I finally got access to my account again. I'm so happy!
Thank you so much you saved my account!
what the way of understanding.................I always had a problem in understanding but you have changed my day now SIR .
i was having hard time trying to understand the concept... you made my day... good job sir.. 👍👍
thank you for watching ... stay here i have uploaded many videos
Great explain sir 👍
Thank you for visiting
good concepts
Masha Allah
Nice video sir. Can I ask where do we put the instrument when actually doing this procedure?
Nyc sir 😍
Concept cleared in just 10 minutes👌
I am happy that helped
Simply solve 👌 thank you sir
All the best
Thankyou so much. Got the idea.🙏
Most welcome 😊
Great it helps us alot .... keep uploading such videos
Have you calculated the length offset or hieght of the offset?🤔
Hey, I love your content so much, today,my lecturer uploaded a link on our eLearning platform and I'm here to say hi,have watched almost all ur contents in surveying, pliz upload some tacheometry work
Happy to hear that it’s helping you. I will upload more ❤️❤️
Good 👍
Thanks
So helpful sir ji...
Enjoy dear
This video must be for Indians who can understand Indians speaking English.
Fantastic thank you so much
Most welcome
Awesome explanation ❤🍂
awesome sir.full clarity.thanks
welcome dear
Great video
Thanks
Great 👍 thanks
Thank you too!
ILOVE YOU SO MUCHHHH THANKS FOR THIS!!
Enjoy dear 🥰
You are great sir lots of loves from peshawar
thank you
Pharmula = formula, vid is good. ty :)
As slam alaikum sir
This video is very helpful for me
w salam. thank you so much
Great explanation ♥️😍
Thank you for watching 😍🥰
good and nice .......great
enjoy dear..........
Thanks for such a good video 🇳🇵
You are most welcome dear
Osm explanation sir 😍😍
thank you dear
teach so good and nice
thank you dear. enjoy... and welcome
welcome sir
Very good making us understand... Thanks sir
most welcome dear
Sir please solve my problem how to set out Railway curve degree=1°and radius=1750mtr
Thanks !!! Helped me a lot
Most welcome. Enjoy
Well done sir...
thank you dear. enjoy
Thank you so much🥺🥺🥺
Most welcome
Sir how did you calculate Radius from Deflection angle ???( you said it is obvious 400 if deflection angle is 60 degree ) 1720/60 is not equals to 400 please help sir
hi... dear 1720/D, here D is not deflection angle, its degree of curvature. however if you look into my video 400m as radius and 60deg as deflection angle are assumed for calculation purpose. remember deflection angle and degree of curvature are two different things......
Thanks sir
Welcome
Hello sir how you got 400×tan(30) =230.94? Can you explain
400 (tan30), remember tan(30) = 0.577 so
400(0.577) = 230.94 units
Sir from where we get 400?
How do you record a video on white screen like shown in your video. What application are you using? Help would be really appreciated.
hello dear... for this animation is MS office / powerpoint
this may be ok if the PI is accessible. in some cases, the PI is on a cliff in which this method is not applicable
Then you can use other method. Uploaded in the same playlist
great
thank you dear
Bohot zabardast sir ap kaha ke rehne wale hain
kpk
Too good sirji 🔥🔥
thank you dear
Now i understand the process it makes it simple in this video..although the english btw ..shukran :)
thank you for joining us
wow I like your accent I think you are from America....🤣
sir how do we produce a double curve on the ground like the ones on roads ,your example has a single curve only
i will try to bring video on this
Vary thank you
most welcome dear
400- square root of 400^2 - 60^2 . how do you get the result at 4.53m ?
its just simple mathematics.. you can use your calculator
Take a thread put on the curve then measure the thread by a scale or tape
One road is 100 ft and the other road is 150 ft . Please explain how to calculate the curveture .
good question , but the answer is long which can be placed in the comment section
thanks brother
Enjoy dear
how can i get first defelection angle teta????
Master ji proper Angle me drawing banao draw with 90angle set square . Looking exact right angles are very important and must .See offsets meeting on curve looking less than 90 degrees.
hello dear. thank you for suggestion... i make videos on computer and drawings are not to scale....
Share video on tournout
?
Video on tournout
Plz sir prepare vedios about coordinates.types and terms.
we will try soon. thank you. however in coordinate topics lecture about distance formula is already in channel,
Can anyone tell me Tangential offset method is used for setting out curve upto how much metre
Upto the length of tangent line.
Nawazish khan sr make a video on load carry on foundation of a three floor building of rcc column and beams and fondation defth
Ok dear
Ok dear
Nice
How to utm coordinate in arc line at any desire point in between arc length
How we get tangent point or radius of curvature?
check the channel
Could you not lay out this same curve just using good taping methods and swing the tape while setting markers on the curve? I just don't see why you would need any complicated math to do this except for maybe a scale greater than 60 meters.
I have uploaded few more methods of setting out a curve. All of them are useful. For example there can be obstacles on site so we switch into another method.
@@Sulimankhanacademy Thanks for the reply, yes it makes sense that obstacles could cause you to change over to another method. I have seen a few curves cut out through sold rock I bet that took some good planning, cheers to you from the USA.
Thank you for watching and compliment 😍🥰🤗
Kindly make a tutorial video on Rankine' method
i will try soonnnnn... be in touch
Thanks sir!
most welcome dear
what f there is a remainder in interval value?
Better to keep small values. Still remains? No problem
Which point is 0 I didn't understand
Please Provide video for Rankin's and 2 theodolite method
ok dear we will try soon
Asad Qayyum magray search for study skills
cool outfits!
Thank you for watching
Prove that 400-(√400^2-60^2)
4.53 wrong
Sir Hindi video oplode kigiye
You habibi bro?
Habibi mean?
Plez upload offset by chord produced method
already available . please check the channel
Sir maths kuda radhu😭😩
👍🏼😂
Thanx
enjoy dear
Please curved setting in hindi
i will try soon. thank you for joining us
Any one seen 2019?
Sir English radhu 😔
Sir English radhu😔😐
R =400 ???
R= 400 m
this is the radius of curve.... 400 meters
Sir, How we can find R value
A video is uploaded in geometric design of highway playlist. Check that for your answer
dei olunga kathaiyan da mairu mathi iruku unda English
oops i am sorry dear... i do not understand your language... by the way i hope you have commented good for me........ thank you for joining me....
iam from srilanka i said "its little difficult to understand your Arabic+English slang to me by the way you done a good job its very useful to engineering students like us
ohhh..... i understand.... thank you dear.. and welcome
Man your accent 😂😂🤦♂️. No offence though
Enjoy both 🤣😂 accent and presentation both 🤪
what OOO... ITS NOT O ITS ZERO...plz correctly pronoun
thank you dear