Ya I know a lot of the pool world is going heavier on cues these days. But honestly I still prefer and break and play with a 17 oz cue. A lighter does deliver more action. As far as my break goes anymore I never really power break. Just doesn't deliver as good as results that a medium or a cut break does. Pockets are smaller now a days so spinning balls in on the break is the best option
Hey Bryan - I was initially skeptical about doing this. But ever since you told me about this a few weeks back, I took that huge bolt out of my 25 oz. Action Heavy break cue down to 19.5 oz. Now I have a nice 5.5 oz. paperweight and my break is noticeably better. I am a convert! This buys me some time before I need to upgrade my break cue. Thanks!
I took the weight out of my heavy players jump/break cue a few weeks ago and it made a huge difference for the better... But I haven't quite found my wing ball break with the change yet.... But it will come👍
I knew there were weight bolts in my cues, (I prefer a 21oz cue), I just never knew how to change them out. I thought I had to take my cue to a cue repair guy and spend money. Thank you so much for this video! It will save me money. I just ordered a new Cuetec Avid and it was only available in 19oz. 😢 Now I can buy the weight bolts and do it myself. Will regular weight bolts fit Cuetecs? Or do I have to buy their Acuweight System? Thank you again for this great tip! ❤
What size shaft do you use, and what size would you recommend for basically a beginner? I have played off and on since I was a kid but never on a regular basis.
Bought a cheap antique 17 oz cue off of a buddy, today for $20. I know it's not valuable, which is why I bought it. I plan to play around with some carving and inlays, get some practice in on something that's not going to hurt if anything goes wrong while learning the process. This is an old cheap cue, no name brand, and looks like it's been tucked away in a storage locker for the past 20 years. The cue butt is missing, but there does not appear to be any hole tapped for adding a weight. What would you suggest I do about adding a bolt ? Drill away and hope for the best? Thanks, appreciate it if you see this, and have the chance to answer. Otherwise, the question is open to anyone else in the comments! Cheers and thanks for the information!
I have a old Heubler break cue I custom ordered from them back in like 1990 & I can find the needed Allen wrench/hex to get it out one it too big one is too small. You happen to know if they had a special sized one I want to add a little weight. Thank you
I found that the closer you are to beginner, the more heavy weight seems to help, but it really is a matter of personal taste. You can always start out with a heavier cue and remove the weights from the cue later. Try 20 or 21 ounce versus 19 ounce
Do you happen to know how this works with Pechauer cues? The butt cap doesn't look to me like it comes off and i dont want to go pulling the rubber out... I know it's adjustable, i just can't find any videos showing how to do so with a Pechauer.
Amateurs lean towards heavier cues professionals, towards lighter cues. In general, but there are some exceptions to the rule - the average pros cue is about 19 ounces.
Hi , just watched your video can you tell where the serial number is on a joss west stick, just found my FIL ,he used to shoot pool with all them big wigs back in the 1970s and this one is from 1971-1973
Hi Brian, I've been searching all over the place for an example video of what's the differences between a heavier and a lighter cue and compare them with how the cue ball behaves and I couldn't find any examples. Would you kindly make an explanatory video with stroke examples for better understanding? Thanks for all the work you go through
I don’t think the difference in weight is enough to justify detailed analysis. It’s far more important to determine how the cue feels in your hand. That said, I’m sure one of the hyper analytical channels might do something on the subject, even though it will be meaningless. You should focus on how the cue feels to you. The only stand out on the subject is that most professionals 95+ percent, preferred to break with a lighter cue because you can generate more speed on the cue. And a lot of amateurs have an extremely difficult time, comprehending this very simple fact.
@@FXBilliards Thank you for the reply, I appreciate it! Been playing for 15+ years now in local competitions here in Cyprus and been using a 19oz cue since. Read online that reducing the weight of the cue could help you step your game up on cue ball control and wanted to give it a try but before I did, I wanted someone else’s opinion on the matter. Thanks again!
My que without is 17 Oz. But, without,I can't add an extension because my weight is threaded in the middle to hold the extension lol. My cap is not threaded for the cap, just a rubber plug. Yeah, it was $130 bucks, not $700 lol. But, I thought people might want to know even with a rubber plug style they do make the weights that extensions can screw into.
Get yourself a Willard tip shaper (or similar) they have a radius gauge on the side. They are available with either nickel or dime radius, some shapers even have penny radius.
I wouldn’t take that from this video because not in 1 million years would i adjust the cue weight by cutting the bolt that can be purchased for a couple dollars - and once you cut it, it can’t grow back if you want to change the weight. Quality cues have weights that can be adjusted in very small increments that you could never do in your own.
Once again priceless info,thanks a lot Brian,I'm gonna bite the bullet,predator sp2 curly maple,12.4 revo shaft,and now about to change from a 20 to a 21oz,great little tip you gave there.personally I'm happy with 19 1/2 oz,what is your preferred weight with aforementioned equipment please?
And btw if you want to drop the weight down even more. After you remove the weight bolt. You can core out the butt with a drill bit. But from personal experience. Go slow with frequent rechecks on weight as you go. Not something to rush. Plus will likely void any woranty.
There are a lot custom cue makers that don't use weight bolts. I have a cue that weighs 20.1 oz and no weight bolt but it has a SS joint which adds a lot of weight. I also have a 18.5 oz break cue without a weight bolt and it doesn't have a place to add one under the bumper.
That helped a lot thanks. I like atleast a 19 I like to feel like I have something in my hand
I would have ordered the heavier cue had I known that. Thank you for all the great information.
Excellent tip. I just lowered the weight of my cue by 0.5oz! Thanks!!
Ya I know a lot of the pool world is going heavier on cues these days. But honestly I still prefer and break and play with a 17 oz cue. A lighter does deliver more action. As far as my break goes anymore I never really power break. Just doesn't deliver as good as results that a medium or a cut break does. Pockets are smaller now a days so spinning balls in on the break is the best option
Very helpful. Thanks!
Hey Bryan - I was initially skeptical about doing this. But ever since you told me about this a few weeks back, I took that huge bolt out of my 25 oz. Action Heavy break cue down to 19.5 oz. Now I have a nice 5.5 oz. paperweight and my break is noticeably better. I am a convert! This buys me some time before I need to upgrade my break cue. Thanks!
I took the weight out of my heavy players jump/break cue a few weeks ago and it made a huge difference for the better... But I haven't quite found my wing ball break with the change yet.... But it will come👍
Ty. Nice tip. Love ur Chanel 💗 💓 💖
Thank you Brian... did not know that
Excellent information
Glad it was helpful!
Good to know.
I knew there were weight bolts in my cues, (I prefer a 21oz cue), I just never knew how to change them out. I thought I had to take my cue to a cue repair guy and spend money. Thank you so much for this video! It will save me money. I just ordered a new Cuetec Avid and it was only available in 19oz. 😢
Now I can buy the weight bolts and do it myself. Will regular weight bolts fit Cuetecs? Or do I have to buy their Acuweight System? Thank you again for this great tip! ❤
Glad to help
What size shaft do you use, and what size would you recommend for basically a beginner? I have played off and on since I was a kid but never on a regular basis.
My tip size is 12.4. Try a few if you can. If not look for between 12.4 and 12.8
Very interesting. A question: What is the diameter of the screws? Thanks
It depends on the brand of cue
well, it´s a viper underground dragon
@@FXBilliards
Bought a cheap antique 17 oz cue off of a buddy, today for $20. I know it's not valuable, which is why I bought it. I plan to play around with some carving and inlays, get some practice in on something that's not going to hurt if anything goes wrong while learning the process. This is an old cheap cue, no name brand, and looks like it's been tucked away in a storage locker for the past 20 years. The cue butt is missing, but there does not appear to be any hole tapped for adding a weight. What would you suggest I do about adding a bolt ? Drill away and hope for the best? Thanks, appreciate it if you see this, and have the chance to answer. Otherwise, the question is open to anyone else in the comments! Cheers and thanks for the information!
Can I know the bolt that is compatible with viper sinister cues? Any help please?
I’m not familiar with them, but maybe someone else is.
I have a old Heubler break cue I custom ordered from them back in like 1990 & I can find the needed Allen wrench/hex to get it out one it too big one is too small. You happen to know if they had a special sized one I want to add a little weight. Thank you
I dont know but maybe someone else can answer this for you.
Good info..
Thanks
How do know weight is besy for you. I have trouble hottong ball to easy, thats why i think I need a heavier cue. Am I right?
I found that the closer you are to beginner, the more heavy weight seems to help, but it really is a matter of personal taste. You can always start out with a heavier cue and remove the weights from the cue later. Try 20 or 21 ounce versus 19 ounce
Hex key or if you are English “Allen key”! Originally named after the “Allen Manufacturing Company”.
That's what we call them in Canada as well
Do you happen to know how this works with Pechauer cues? The butt cap doesn't look to me like it comes off and i dont want to go pulling the rubber out... I know it's adjustable, i just can't find any videos showing how to do so with a Pechauer.
I would recommend calling a retailer who sells the cues they will know for sure
Hi, will this work for the Viking Valhalla cue? thanks
I am not 100% sure but most cues work the same way
what is the most recommended?heavier or lighter cues?
Amateurs lean towards heavier cues professionals, towards lighter cues. In general, but there are some exceptions to the rule - the average pros cue is about 19 ounces.
what's the size of the wretch you use to take that bolt out? Thank you
I’m not sure, but it’s pretty much the same size for every brand of cue -. If you check with a retailer they could tell you.
Hi , just watched your video can you tell where the serial number is on a joss west stick, just found my FIL ,he used to shoot pool with all them big wigs back in the 1970s and this one is from 1971-1973
I’m really not sure but if you call a retailer, they would have a pretty good idea.
Where did you get that black shaft from on the other stick?
That is a Predator Revo shaft. It is available everywhere. Use this link Predator Revoamzn.to/3QZ7rWj
Hi Brian, I've been searching all over the place for an example video of what's the differences between a heavier and a lighter cue and compare them with how the cue ball behaves and I couldn't find any examples. Would you kindly make an explanatory video with stroke examples for better understanding? Thanks for all the work you go through
I don’t think the difference in weight is enough to justify detailed analysis. It’s far more important to determine how the cue feels in your hand. That said, I’m sure one of the hyper analytical channels might do something on the subject, even though it will be meaningless. You should focus on how the cue feels to you. The only stand out on the subject is that most professionals 95+ percent, preferred to break with a lighter cue because you can generate more speed on the cue. And a lot of amateurs have an extremely difficult time, comprehending this very simple fact.
@@FXBilliards Thank you for the reply, I appreciate it! Been playing for 15+ years now in local competitions here in Cyprus and been using a 19oz cue since. Read online that reducing the weight of the cue could help you step your game up on cue ball control and wanted to give it a try but before I did, I wanted someone else’s opinion on the matter. Thanks again!
what is the size of the hex adapter you used?
It’ll change from cue to cue I’m not sure what size it is.
My que without is 17 Oz. But, without,I can't add an extension because my weight is threaded in the middle to hold the extension lol. My cap is not threaded for the cap, just a rubber plug. Yeah, it was $130 bucks, not $700 lol. But, I thought people might want to know even with a rubber plug style they do make the weights that extensions can screw into.
How exactly do I accurately measure tip radius?
The tip size would’ve been noted on the shaft of your cue when it was purchased. I would start there.
@@FXBilliards well I didn't get it new a league friend had it bought it off of him he said it's a Dime?
Get yourself a Willard tip shaper (or similar) they have a radius gauge on the side. They are available with either nickel or dime radius, some shapers even have penny radius.
What I'm really taking from this is the bolts could also be cut to very finely tune them 👨🏫
I wouldn’t take that from this video because not in 1 million years would i adjust the cue weight by cutting the bolt that can be purchased for a couple dollars - and once you cut it, it can’t grow back if you want to change the weight. Quality cues have weights that can be adjusted in very small increments that you could never do in your own.
I have a 25 Oz and I want to get down to a 18oz
Once again priceless info,thanks a lot Brian,I'm gonna bite the bullet,predator sp2 curly maple,12.4 revo shaft,and now about to change from a 20 to a 21oz,great little tip you gave there.personally I'm happy with 19 1/2 oz,what is your preferred weight with aforementioned equipment please?
All of my cues are set at 19 ounces
😁👍
Predator is the best
What size hex key? I got the butt off. 😂
I will different from cue to cue. You should get a small set and try them out. A retailer like pool dawg might also be able to help
@@FXBilliards I decided to get a new jump cue altogether
And btw if you want to drop the weight down even more. After you remove the weight bolt. You can core out the butt with a drill bit. But from personal experience. Go slow with frequent rechecks on weight as you go. Not something to rush. Plus will likely void any woranty.
My pool cue does not have one
What brand is your cue?
@@FXBilliards Classic Sport 58 in Precision Strike Billiard 2-Piece and I have a more expensive one but i don't remember the brand of the other one
There are a lot custom cue makers that don't use weight bolts. I have a cue that weighs 20.1 oz and no weight bolt but it has a SS joint which adds a lot of weight. I also have a 18.5 oz break cue without a weight bolt and it doesn't have a place to add one under the bumper.