Thank you, I’ve been searching all day to try and fix my Karcher old sealed unit gun. This was truly a eureka video, now it’s working again. Very happy to have found your video.
Awesome work. Just saved me endless sweat and tears. It would never have occurred to me to put that spring in the inlet tube opening. I figured it was a return spring, but not where it went. Thank you.
what size o'rings 1 black & 1 green fit the wand jet/valve inside the gun on the champion red washer. the white valve shown in this video. any help please.
Thank you! This is very helpful. I lost the valve while trying to replace the o-rings. Any idea where I can order the valve or if I can use any valve available?
Hi I hope you can answer this, My gun is leaking, I took it apart and it looks fine, could it be the o ring where the short stubby spring is located? Thanks in advance
thanks for the vid. my trigger gun started leaking suddenly. when i opened, it seems to have all the parts that you showed and they all seemed ok. what might have gone wrong?
Thank you, I’ve been searching all day to try and fix my Karcher old sealed unit gun. This was truly a eureka video, now it’s working again. Very happy to have found your video.
Awesome work. Just saved me endless sweat and tears. It would never have occurred to me to put that spring in the inlet tube opening. I figured it was a return spring, but not where it went. Thank you.
From Venezuela, I already considered my hydrojet pistol as a loss and when I see this video I can repair it. Thanks for sharing.
saludos hermano desde Venezuela gracias por tu tutorial y colaboración pude arreglar mi disparador de agua
Great video , I had no idea where that fatter spring went!
Thank god, I searched for DAYS looking to see where that large spring goes, thank you thank you thank you 🙏👍👍🇨🇦
Great video couldn’t find where the spring went back and now also realize should be one at the top too
I got that one from b&q but it won't lock while in use to make it easier , but it does lock and unlock after hand released
great video that help me a lot, about this gun mine is leak from the joint of plastic form.
I have a leak where the hose connects to the gun. split internal tube, or just the o-ring?
My white valve cracked, where can I get another one?
Can you tell me what size the oring is on the black inlet tube on the end the hose connects to please?
i. Great help thanks. Where can I get a complete gun? The link above isn't working.
Awesome! this is very helpful.
this video helps me find my problem. Thanks for the video
is it the same setup for karcher?
Thank you!!
Excellent video. Very helpful.
what size o'rings 1 black & 1 green fit the wand jet/valve inside the gun on the champion red washer. the white valve shown in this video. any help please.
Thank you! This is very helpful. I lost the valve while trying to replace the o-rings. Any idea where I can order the valve or if I can use any valve available?
Nesesito una pistola para idro labadora
Hi I hope you can answer this, My gun is leaking, I took it apart and it looks fine, could it be the o ring where the short stubby spring is located? Thanks in advance
Simon Hunt yes it's there
Yep, crack in the tube at the angle. I can't find a replacement.
le prix du tube dans le pistolet
thanks helped me out a lot .
thanks for the vid. my trigger gun started leaking suddenly. when i opened, it seems to have all the parts that you showed and they all seemed ok. what might have gone wrong?
Crack in the black tube at the angle.
I need the valve tube! It has a small crack in the angle. Anyone ?
I removed the tube and modified the gun and attached the hose directly. Works great!
thanks
Muito Obrigado
i have a big leak in my gun what do you think is it?
Crack in the valve tube.
It's a release valve alright
Black inlet tube at 1.04 is weak link and splits at join...and guess what, they don’t have spares , you need to buy a whole wand...rip,off