Thanks in advance for the video.. I use to repair Mototrbo series radios since 2014 and after many cases, discovered that what cause the battery unchargeble condition is the control circuit inside. I also made a technical report and sent to Motorola Dealers in order to improve the battery service life and they dont even replied yet. I consider myself as an expert on those transceivers upon have rapaired hundreds of them and do not recommend such radios. They have been presenting same quantity of failures as much as any other less expensive tranceivers. Doesn't worth the cost. Believe me.
That's true, more like laptop battery. I have also "cheap chines from Aliexpress" clone without impress (of course it's labeled impress) - i'm wondering what circuitry is inside, but right now it hold capacity so i can't open it.
That's not an Impres battery. That's a normal 1400MAh 7,2V metal hidrure Mototrbo battery, but not impres. The impres are the high capacity litio expensive mototrbo batteries.
@@stopnwonow5044 Sorry to desagree with you..that's endeed an impress technology battery. Sadly, they're pure rubbish. I repair Mototrbo series transceivers and batteries fail in less time than old NiCd batteries. A real loss of money.
Fundamental flaw here looks like you have twisted miss - shaped the casing as is still needs to sit in charger base.would of used dreamel at beginning.
Why disassemble the battery in such a barbaric way? You should have taken a rubber hammer and tapped along the edge. You can go along the seams with a blade. It might have taken a long time to tap, but the case would have remained intact.
Thanks in advance for the video..
I use to repair Mototrbo series radios since 2014 and after many cases, discovered that what cause the battery unchargeble condition is the control circuit inside. I also made a technical report and sent to Motorola Dealers in order to improve the battery service life and they dont even replied yet.
I consider myself as an expert on those transceivers upon have rapaired hundreds of them and do not recommend such radios. They have been presenting same quantity of failures as much as any other less expensive tranceivers. Doesn't worth the cost. Believe me.
What cells are being used in these batteries? Thank you for the video!
Thank you. You saved me a nasty pointless job.
You are welcome!
Bnjr esque il existe des régénérateur de batteries pour les DP4800 MOTOROLA
Very insightful and very helpful video. Thank you very much! Ευχαριστώ πολύ
Nice look inside of an Impres battery. Shows the actual circuitry of the Impres technology.
That's true, more like laptop battery.
I have also "cheap chines from Aliexpress" clone without impress (of course it's labeled impress) - i'm wondering what circuitry is inside, but right now it hold capacity so i can't open it.
That's not an Impres battery. That's a normal 1400MAh 7,2V metal hidrure Mototrbo battery, but not impres.
The impres are the high capacity litio expensive mototrbo batteries.
@@stopnwonow5044 I have a pmnn4069 and it's a li ion but not high capacity
@@stopnwonow5044 Sorry to desagree with you..that's endeed an impress technology battery. Sadly, they're pure rubbish. I repair Mototrbo series transceivers and batteries fail in less time than old NiCd batteries.
A real loss of money.
@@denniss155 Hey! You know how to fix a dead dp1400 battery? I have some tested icr 18650 cells. Can you help me with it?
i opened a GP300 battery years ago and this reminded me exactly how awful it was.
Fundamental flaw here looks like you have twisted miss - shaped the casing as is still needs to sit in charger base.would of used dreamel at beginning.
Motorolla made it that way so you would need to buy a new one instead of just buying a rechargeable battery. It's all about control.
Your restoring is opening cover only. . 😀😀😀
Why disassemble the battery in such a barbaric way? You should have taken a rubber hammer and tapped along the edge. You can go along the seams with a blade. It might have taken a long time to tap, but the case would have remained intact.
Me anytime I try to fix anything
Не удивил.
New cells, a few drops of hot glue. will look and work like brand new. Ha
انت بوظتها كل ده غلط طبعا
Глупенький мальчик. Аккумулятор надо обернуть полотенцем два раза. Резко, но несильно, ударить молотком по шву. Аккумулятор открывается как орех. 😅
Se desarma y no sirve para nada...fin😂