Will these work on a 2010 Mercedes Benz E350 for fog lights. I’m wondering if it’s plug n play, or if I’ll need a wiring kit which I’m trying to avoid.
@@honhosh just FYI I had a similar situation switching from the low beam halogen to LEDs for the low beam. I can confirm that the SV-4 low beam system they sell works flawlessly for your mercedes without requiring any additional canbus adapter. It was a plug and play installation with excellent results. I'm hoping for similar luck with these fog light bulbs but i'm less optimistic as I'm suspicious that the housing is too tiny to house enough internal circuitry to facilitate canbus error free operation. Again... will keep you posted on the outcome if I remember.
@@pyrodon1910 how did the led dogs work out? Also, Installed morimoto 5k hid bulbs w/35 watt ballast last November. I was happy with performance, but driver side bulb went out a few months ago. I will replace 5k with 6k color in the near future.
I bought these for my 2011 Escape. I thought the orientation was supposed to be vertical with LED lights. The connection only allows for horizontal orientation. Being that they were a pain to reach, without tearing the bumper apart, I didn't second guess the connection to orientation. But which is correct?? Vertical or horizontal??
@@XenonDepotOffRoad Thank you. I'll have to change them later. The way the connect to the fog light housing, makes them sit with the LED facing up and down. Is there an Allen bolt I can loosen to adjust them?
I recently bought H11/H9/H8: Xtreme LED CMB (5000K) from your website. The website says they will work for my 2018 Jeep Renegade. When I installed them they glow without the vehicle on. I do NOT get a warning light on my dash and the lights function perfectly besides them not turning off. Are these defective? If so can I return them and exchange for a new pair? Item bought: H11/H9/H8: Xtreme LED CMB (5000K) Order #: XD-402648 Vehicle installed: 2018 Jeep Renegade 2.4L
Will these work on a 2010 Mercedes Benz E350 for fog lights. I’m wondering if it’s plug n play, or if I’ll need a wiring kit which I’m trying to avoid.
did you try them? if so did they work? Would like to try them on my E class also.
Not yet, I plan to.
@@honhosh I may beat you to the punch. I'm going to order them tomorrow. Will update this comment if I remember.
@@honhosh just FYI I had a similar situation switching from the low beam halogen to LEDs for the low beam. I can confirm that the SV-4 low beam system they sell works flawlessly for your mercedes without requiring any additional canbus adapter. It was a plug and play installation with excellent results. I'm hoping for similar luck with these fog light bulbs but i'm less optimistic as I'm suspicious that the housing is too tiny to house enough internal circuitry to facilitate canbus error free operation. Again... will keep you posted on the outcome if I remember.
@@pyrodon1910 how did the led dogs work out? Also, Installed morimoto 5k hid bulbs w/35 watt ballast last November. I was happy with performance, but driver side bulb went out a few months ago. I will replace 5k with 6k color in the near future.
I bought them as a gift for my mom's van. The LEDs are 12 and 6 instead of 9 and 3. Is there a way to adjust?
Unfortunately not with these bulbs.
I bought these for my 2011 Escape. I thought the orientation was supposed to be vertical with LED lights. The connection only allows for horizontal orientation. Being that they were a pain to reach, without tearing the bumper apart, I didn't second guess the connection to orientation. But which is correct?? Vertical or horizontal??
The LED diodes on the bulbs should face directly left and right.
@@XenonDepotOffRoad Thank you. I'll have to change them later. The way the connect to the fog light housing, makes them sit with the LED facing up and down. Is there an Allen bolt I can loosen to adjust them?
The CMB LED bulbs cannot be adjusted unfortunately. As long as they have a good beam pattern they should be fine! (:
Can I use these leds in my high beams.
Are they an upgrade?
These would not be an upgrade. Look into the GTR Lighting CSP Mini for a budget upgrade!
U can. But it may have an off angle. And if u want them for looks and u focus on low beams which that’s ur main priority, go for it.
I’m actually looking at your site as well and can I please ask for install videos for this fog on a 2020 4Runner? Thanks.
This may be a video in the future!
@@XenonDepotOffRoad, thanks.
I recently bought H11/H9/H8: Xtreme LED CMB (5000K) from your website. The website says they will work for my 2018 Jeep Renegade. When I installed them they glow without the vehicle on. I do NOT get a warning light on my dash and the lights function perfectly besides them not turning off. Are these defective? If so can I return them and exchange for a new pair?
Item bought: H11/H9/H8: Xtreme LED CMB (5000K)
Order #: XD-402648
Vehicle installed: 2018 Jeep Renegade 2.4L
Reach out to us at Sales@XenonDepot.com and we will get you taken care of!
Will these bulbs work for my 2022 4 runner drl’s?
They might, we haven't tested them yet!
cmb vs CSP ?
The CSP Mini is about 3 times brighter than the CMB LED bulbs!