ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2015
- 2010-07-06, b, Neeraj, Rb, Analyze, Kenmore, Elite, Oasis, HE, Washer,
20100706b NeerajRbAnalyzeKenmoreEliteHEWasher
Analyze, Kenmore Elite Oasis HE Washer, Kenmore Elite Oasis, Kenmore Elite Oasis HE, Kenmore Washer, Elite Oasis, Elite Oasis Washer, Elite Oasis HE Washer, Elite Oasis HE,
14:28 Started disassembly process. Took off panel. Used cardboard underneath.
I got the same problem. Changed the pump but still not working. Took some cloth out from inside the drum . Still spins and when it’s time to drain it stops idle.
I’m having this same exact issue. Did you get it fixed? If so, how?
Thank you… you save me hundreds of dollars! Thank you!
14:37 camera operator frantically searches for a bucket.
This is hilarious. Is this a spoof of the movie Dumb and Dumber?
Actually, he has extremely good problem solving skills. You can hear from his analysis that he has a pretty good method of figuring things out. I initially called a few washer repairmen and they all said they didn't know how to fix these modern clothes washers. The man in the video is in a different field of expertise that is completely unrelated to fixing clothes washers, but he somehow was able to figure all of this stuff out.
How change a rod
Mine is saying f 72 when running the test
I need help with my washer Kenmore elite code f2
F2 fault code indicates a problem with the washer’s drain system
Clogged or Kinked Drain Hose
The drain hose on a Kenmore washer should remain free of obstructions so the water drains from the washtub. A kink in the drain hose behind the washer can impede the flow of water from the washer. A drain hose inserted more than 4 1/2 inches into a floor or wall standpipe drain system can cause the water to siphon back into the washtub.
Stuck Water-Level Pressure Switch
Your Kenmore washer uses a water-level pressure switch in the control panel to detect the level of water inside the washtub. You can find the pressure switch behind the control panel in top-load models or attached to the inside wall of front-load models. The round switch is approximately 3 inches in diameter with a clear or black plastic tube connected to the bottom or side of the switch. The tube runs from the pressure switch to the exterior washtub. As the water fills the washtub, it changes the air pressure inside the tube and lets the switch know when the water has reached a predetermined level. A stuck contact on the pressure switch can stop the advancement of the wash cycle and keep the water from draining. A few taps on the top of the switch with a screwdriver handle can release the contact and fix the problem causing the F2 error code.
Loose Pump Connections
A pump connects to the bottom of the Kenmore washtub and to the drain hose to pump the water from the washtub and out the drain. You must remove the front panel of front-load models to access the drain pump or lay top-load models on the ground to access the pump beneath the washtub. Electrical connections run from the control panel to the side of the pump to power it. Over time, the vibrations caused by the washer could loosen the wire connections and keep the pump from performing its job. Checking the pump for secure wire connections can clear the F2 error code on your Kenmore washer.
Clogged Drain Pump
Small items can slip through the inner washtub into the outer tube and eventually make their way through the washtub drain into the drain pump filter on Kenmore front-load models. A buildup of small items and debris can clog the filter and keep water from passing through the pump and out the drain line. You can access the filter through the small door along the bottom front of your washer or by removing the front panel. The round filter housing connects to the side of the drain pump and opens by grasping the raised handle and twisting it counterclockwise. Cleaning the filter every two or three months can avoid the clogs that are causing the F2 error code to appear on your Kenmore washer’s control panel.
Pf no water
Don't walsh
Tradudcion porfavor
8:55 How to do diagnostic tests. Press button for 3 seconds. Pause 3 seconds. Press button again for 3 seconds. Pause 3 seconds. Press again for 3 seconds.
10:15 Diagnostic test C7 is where this particular washer fails.
Pf is the code
Replace w!ter pump
I'm
Mi lVDor no l ava
Not helpful and long
What error code are you getting?
Do the diagnostic sequence shown at 8:55 of this video then record the error code.
@@RealtRL c68
F72 wht tht mean