This has to be the HVAC video of the year. Troubleshooting and swamping wasp . When you did the Ali Shuffle with the Blu hat has epic. RIP the great Elizabeth and RandySavage ! “ OOOO YA “ “Come here baby and give the Macho Man a Kiss “.
Thank you, Ryan, great video. I agree if the numbers look right for 422B then it's more than likely 422B, However, I agree with you I'd write it up to pull the charge and recharge with 422B just to be on the safe side. I think I'd write up the heat exchanger also because that's gonna go real soon I would say. Cheers for making these videos, I appreciate the time and effort that is required to film and edit so thanks a bunch.
This is great to see a knowledgeable tech really analyzing and fixing a unit. Around here they just come down and say you need a whole new unit. I'm subbed now.
Tip from a fellow yinzer on those old Honeywell economiser controls all you have to do to bypass them is simply pull and isolate the main incoming 24 volts to the controller. Unit will act like no economiser is installed.
It sounds ridiculous, but wasps are the primary reason I didn’t go the HVAC/R or electrician route for my career. I wanted to, but they are my kryptonite. Man with a gun? You can maybe reason with him. A wasp? They just want to end you. Total sissy when it comes to them. My garage always has two full cans of HotShot, at all times. I scan my soffits multiple times per week at my house. It’s an unreasonable fear, especially since I’ve never been stung by one in my 36 years! But damn they make me freak out. The hat is on point. In my younger days I drove convertibles. I had two Eclipses in a row and then when I got into adult money, a stunning BMW. Always kept a hat in the map pocket. Nothing beats a wasp or other stinging creature better than a good hat, as you proved here. New to your channel and subscribed. Cool vid bro.
I think it was R22 as the refrigerant, you cannot have a negative superheat, please use dew point as a way to calculate superheat. At 13:58 you can see the gauge and temp, I am curious as to what the issue was. I like the video keep up the good work.
8:10 LOL they're not randomly coming at you, there's a nest in that unit, squat down and check the metal channels on the roof curb, always do recon before starting work!!
Good stuff, entertaining and a little sentimental for me, I grew up in that area back in the 70s, do you ever get to the Norwin area off rt.30? Anyhow great vids, good on ya!
This has to be the HVAC video of the year. Troubleshooting and swamping wasp . When you did the Ali Shuffle with the Blu hat has epic.
RIP the great Elizabeth and RandySavage !
“ OOOO YA “
“Come here baby and give the Macho Man a Kiss “.
😂 thanks man! I appreciate you watching.
I like that half the video is just killing wasp. Lol
Thanks for watching!
Thank you, Ryan, great video. I agree if the numbers look right for 422B then it's more than likely 422B, However, I agree with you I'd write it up to pull the charge and recharge with 422B just to be on the safe side. I think I'd write up the heat exchanger also because that's gonna go real soon I would say.
Cheers for making these videos, I appreciate the time and effort that is required to film and edit so thanks a bunch.
Thank you for watching and the comments, it motivates me keep making videos when people that have watching for years enjoy them!
This is great to see a knowledgeable tech really analyzing and fixing a unit. Around here they just come down and say you need a whole new unit. I'm subbed now.
I agree . Everyone wants to be a salesman now !!!
I appreciate that! Thanks for watching
Look it's snowball back from the dead. And reincarnated as a Carrier!
😂 jeez, thankfully I've never had a rumble with wasps around here.
Good stuff, you never know with all the drop ins they came out with.
Thanks for watching
Tip from a fellow yinzer on those old Honeywell economiser controls all you have to do to bypass them is simply pull and isolate the main incoming 24 volts to the controller. Unit will act like no economiser is installed.
It sounds ridiculous, but wasps are the primary reason I didn’t go the HVAC/R or electrician route for my career. I wanted to, but they are my kryptonite. Man with a gun? You can maybe reason with him. A wasp? They just want to end you. Total sissy when it comes to them. My garage always has two full cans of HotShot, at all times. I scan my soffits multiple times per week at my house. It’s an unreasonable fear, especially since I’ve never been stung by one in my 36 years! But damn they make me freak out.
The hat is on point. In my younger days I drove convertibles. I had two Eclipses in a row and then when I got into adult money, a stunning BMW. Always kept a hat in the map pocket. Nothing beats a wasp or other stinging creature better than a good hat, as you proved here.
New to your channel and subscribed. Cool vid bro.
Last year summer couple bee jumped on me, when I open RTU carrier . Be watch out for that. Great video as alway. Thank you for sharing
Thanks for watching
That’s hilarious 😂😂😂 love the wasp situation
👍🇺🇸🇺🇸💪 great troubleshooting I like the static pressure check to find type of refrigerant.
Thanks shine!
I agree 422B . Your right on spot to tell them the only sure thing is to recover & recharge with known product. Nice job
Thanks! I appreciate the comment and you watching.
whats the difference between b and d. oil compatibility?
HVAC'$ greatest story creator with full movie production👍👍👍. "Wasp Slayer is back and he's loaded"😁😁😁
I appreciate that Rick! I hope all is well with ya.
@@HughesManHVAC yeah, I'm good, just glad it's Friday in a few hours🙃
Hands down best video and this legit could be a movie
Thanks for watching
Good little vid Ryan ... I agree with you on 422B ... Lets have a Lite beer or 3 ...Thx ...
Oh man, already on it! Cheers 🍻 Thanks for watching!
The wasp were coming from the curb area. Saw one come from the base of the unit right at the curb.
I think it was R22 as the refrigerant, you cannot have a negative superheat, please use dew point as a way to calculate superheat. At 13:58 you can see the gauge and temp, I am curious as to what the issue was. I like the video keep up the good work.
Great point!
KO Dirt Blaster works great against wasp, trust me it freeze's them and they drop like little rocks.
Good stuff! Thanks for watching
8:10 LOL they're not randomly coming at you, there's a nest in that unit, squat down and check the metal channels on the roof curb, always do recon before starting work!!
Awesome n Congrats! Well done Video n very thorough job....
Thanks!
Love the videos man, really learning a lot from you. Keep up the good work 👍🏽😁
Thank Mitch, I appreciate it
I really enjoyed this video, great job 👏🏾
I agree 422b was the right choice
I was curious to see what people thought. Thanks for watching Mr. R
Good stuff, entertaining and a little sentimental for me, I grew up in that area back in the 70s, do you ever get to the Norwin area off rt.30? Anyhow great vids, good on ya!
Not that I can remember, I appreciate you watching the video man!
That's an old tudi account. Such a great company.
I knew a couple of guys that worked there. Seems like a good company.
@@HughesManHVAC it's definitely a good company
Hell yeah....a video from the HUGHESMAN himself. Hope life it treating you well Ryan
Doing well man! How’s life in Texas?
@@HughesManHVAC hot....but awesome...loving it so far
Thanks Jason
Had same issue. Turns out the filter was dirty
6:11 "We got water dripping out of every corner of this thing"
Great video. Thank you.
Great content, just got dizzy watching the camera moving all over.
Try watching with one eye closed, thanks Kevin!
2:47 Piece of crap blower. Needs some pulley/belt maintenance. 😀
Any info on the TXV valve head? Not sure if these differ with R422b and R22?
No txv on this unit
What state are you in?
Pennsylvania
Nice job that always annoying last tech never made mark it was switched to 422B
Thanks for watching!
You got it 😀
Thanks for watching!
Oh yeah
Thanks for watching!
128 thumbs up
Thanks Steve!
Yea nobody has 22 anymore
Thanks for watching
Those circuits that weren’t iced up must be restricted
The contactor was welded closed
I could be wrong tho.
Fuck yea
Thanks for watching
3:42 I don't know why, but this is my first time watching this video and this drain looks clogged.
The water was from all the ice I broke off the compressor. I did clean the drain trap. Thanks for watching