At the end of the day- any security system will simply delay an attacker. A bank safe left abandoned would eventually be cracked one way or another. 2 minutes spent stalling a pick pro is pretty good!
this was probably one of the best collaborations we have ever done! Thank you for coming out and filming with us. And huge insane props to Paclock for creating this masterpiece!
@@paclockpres.9805 Goes to my comment just now, some end users do appreciate the time and effort you Great People put into a project like this. Thank you !
I hear LPL say, "I'm going to put a tension wrench there just so I dont scratch this up. This is an absolute masterpiece." Then I follow the link to the skateboard channel and see them trash the wheels by riding on it!
The fact the locks actually take time to be picked here are a massive testament to their security. That puck core was so resistant it took him almost a whole minute!
@6 6 Seems like you got it wrong about him being illiterate, but you're not man enough to admit it. Therefore you're insulting anyone who challenges you. How utterly pathetic.
@Stunt Dummy Also take a look at the linked braille skateboarding video. LPL demonstrates "speed bypassing" to them on a bunch of Master locks. Opens about 5 of them as fast as he can pick them up off the table.
@@ZenoDLC depending on how you value the pins. If a security pin values double a regular than a masterlock with 4 standard is a 4 and a pac is 12, so according to this entirely fictional metric more like half a pac is about 150% as secure as a master
@@My1xT as in seconds to open. I'm pretty sure it would take longer for LPL to disassemble that skateboard without keys than to pick Master's entire lineup
Me: "The wheels are puck locks with holes in em, there's no way this is a serious video, surely it's an April Fool's joke"." *Checks post date* "Hmm September. Better watch the entire video so I can be sure that I understand the joke." "...it's a real skateboard, where's the joke?" >MASTERSUX "There it is."
"Make Padlocks Great Again" "Mastersux" Goddamn, Paclock is so based. With everything that I've seen from them, I'm absolutely going to give them my business next time I need some locks.
@@TheDankEngineer the obvious one, that requires no wild jumps to conclusions. Statistically improbable that Tyler is one of the 00.0027...% of American citizens holding right-wing racial supremacist views.
I actually think that minutes for LPL to pick could be a pretty reasonable security rating system. So for example, LPL1 would be good enough for most purposes, LPL3 would be high-security, and LPL-infinity would be "use this if you're truly paranoid."
@@_to_dream_or_not_to_dream Definitely true that locks he can't pick tend not to make the channel. Honestly, I'd be really interested to see a rundown of locks he can't pick (especially ones that might still actually be slightly affordable for consumers).
Well chasing cheapest option feels like short term strategy and can damage company reputation in long run, this on the other hand can be taken as kind of fun advert that will bolster their reputation and helps in long run. These strategies usually tries copy customer needs, if general customers buy cheapest, or rather something with good reputation but larger price. Good thing we have LPL, so we can see which ones are better(and learn some lockpicking on side).
@@belisarian6429 Often, ownership is the key here. If a company is privately owned or owned by an ESOP with no immediate intent to sell, there is often a focus on long-term viability. If a company is owned by an investment firm,, publicly owned without a clear majority shareholder, or the majority owner intends to sell, you will see a lot of focus on short-term decision making. My employer is casually destroying its long-term viability with a strong drive to immediately increased sale value as we speak. They started this when they decided to sell and the buyer was an investment firm that is continuing the trend. Whoever owns the company when the bill comes due will probably make an initial public offer to offload the thing before it crashes, much like our current owner did with Uber. The US economy is currently rigged to encourage this kind of economy destroying behavior and it does a fine job of making a few rich and many unemployed. It does have the benefit of making room for startups, though, so we have that going for us...
my new car is great, my old car didnt have remote entry and thus ate my key when it ultimately froze in the winter, also the window got stuck down and the wheels kept falling off it, twas a mess.
This reminds me when I was going to a class, I stopped at a store with my mom and I saw an acquaintance’s car. Apparently, I was the last one to see the car minutes before it was stolen.
This may have just won the award for BEST VIDEO EVER from Lock Picking Lawyer. What an awesome piece of pure art! Hats off to PACLOCK for their humor and humanity!
Good lock plus the care to not wanting to scratch the "wheel". Still, a good example on how a well made lock makes even a skilled picker have to work for his meal.
This is absolutely amazingly awesome! I've ridden BMX all my life and ran a skate shop/park for a number of years so I would say that the alternative sports industry runs deep with me. I've been watching LPL for a couple months now and this has got to be the sweetest thing I have ever seen!
This is so awesome! Excellent collaborative effort. The time alone spent on the CAD. Not to mention the machining and anodizing. The Icing was the laser etching, I haven't giggled like that in a while. Well done, gentlemen!
LockPickingLawyer - "This is an absolute masterpiece and would be a shame to damage it" Braille Skateboarding - **Ollies** **Kickflips for 4 minutes** **Ledge grinds**
@@interwebtubes Haha. If you rode, you'd know that setup is shit. It is just a gimmick for shits and giggles and nothing to be taken too seriously. If there is a poser here, that would be you. :)
Pacock seem to be a great responsive company! Good to see them having a bit of fun with the community! Will definitely have to try source a lock or two from them in Australia!
I believe it was one of those designed with the construction key waffers that seize when you dont use the key. Scroll through his vids he made one showing how to do it.
PACLOCK and LPL Joint Statement: Here is the world's first skateboard lock, designed to prevent theft. 12-Year Old: Picks up skateboard, puts it under armpit and walks away. PACLOCK and LPL: Ah 🤔
Imma get r/woosh'ed, but the wheels cannot be moved either way and cannot be replaced since the mechanism is covering the screws. Edit: R/woosh to me. I am blind and did not see the bolt that hold pretty much the entire thing. Edit 2: ᵐᵃˢᵗᵉʳˢᵘˣ
I as a longboarder would die for something with this much simple quick swap design if it could be as smooth as a normal cruiser setup One backpack (with room for personal storage), and you have an infinite potential for possibilities
It’s nice to hear that the head engineer actually has some experience in a world that requires you to keep things protected. He’s not just some idiot that doesn’t know what he’s doing
LOL!!! That was truly wonderful! The fact that Paclock did this shows that they have some truly wonderful corporate culture, and makes me much more inclined towards their products! Great job!
This made me look at some master padlocks I have at home. One of them I dont know I can, but I can turn the core without doing anything, not bypassing nothing. Just stick something in and turn thats all thats needed.
Isn't it amazing to see such inovative and crazy ideas getting realized? Besides, picking that wheel alone took longer than some of your other picking videos. Looks like they know how to build a lock.
No way! hahaha, that is awesome.. Totally didn't expect to see that when I watched the latest you make it we skate it.. I was BLOWN away, lol... I'm also not a skater but still watch their channel. Great work buddy :D
that has to be the coolest cross channel piece I've ever seen ! It also speaks volumes as to just how totally awesome the people at Paclock are. The amount of time/labor/cost of that board is not something most companies would put into a one-off.
As someone who always has ideas of redesigning objects and is constantly breaking things, I love the personal connection Greg has with potential customers. My next locks will be Paclock.
One of the coolest skateboards I have seen in my life👌 Very cool of Paclock to build that for you, what a great company! Lol Master trolling that is next level and very true 'MASTERSUX' 🤣
This is the coolest thing I've ever seen, I've wanted a Paclock ever since I saw you do a video on them, and I just bought one on Home Depot's website because they didn't seem to come to our store even after all the time I waited. Well I can't wait for it, they seem like an awesome company and I am happy to support them, thanks for introducing them to me :) that shot at master lock was priceless xD
LPL I think you're really onto something here. Would love to see more themed collabs with other TH-cam channels (especially if you can convince paclock and other companies to make custom locks)
Not a skate board fan but gotta appreciate the engineering and craftsmanship that would require to make something like that. Literally reinventing the wheel. Great work
Paclock, well played. My first lock I ever picked was a cheap 'hyper tough' padlock. The tools I used were an Allen wrench that I shaped into a pick and another Allen wrench that I turned into a tension wrench. The second lock I ever attempted and picked was my dad's 20ish year old masterlock padlock. So yeah, that laser etched troll was what I needed!
![[901] A Trailer Lock That I Would Use... Picked (Proven Industries)](http://i.ytimg.com/vi/xVtHiX12TVw/mqdefault.jpg)
![[901] A Trailer Lock That I Would Use... Picked (Proven Industries)](/img/tr.png)
![[1001] The ITL Robotic Safe Cracker! (ITL-2000)](http://i.ytimg.com/vi/nDgC8JOQhiM/mqdefault.jpg)
![[480] The Top Ten Nastiest Keyways (In My Collection)](http://i.ytimg.com/vi/GncYzuRMtb8/mqdefault.jpg)
![[SUB] 베몬이 교관님 멘탈을 탕탕 후루후루~٩(๑❛ᴗ❛๑)۶ FOREVER 웃게 되는 갓기들의 수련회 | 돌들의침묵 | BABYMONSTER(베이비몬스터) 'FOREVER'](http://i.ytimg.com/vi/FISAO7BwIxE/mqdefault.jpg)
![[931] PacLock is Coming to Home Depot!](/img/n.gif)
"I'm not really a skater [...]"
Well, LPL, I'm not really a lock picker either, but here we are.
Lmao well said...
😂
Summed up perfectly lol
one of the first youtube comments to really make me audibly giggle hahaha
I'm not really either but I watch both channels I was pretty surprised to see those hands on Braille
One of my guilty pleasures on TH-cam is a lockpicking channel. I'm not really a lockpicker, but ...
Join us on the dark side.
Haha, same here 😂
@NapoEz3 And illegal in my country if you do not need it for your profession.
Porno & picking, two vices
You can thank TH-cam algorithms for that.
New advertising line for PACLOCK: "Our locks are so good it took LPL almost TWO minutes to pick them!"
At the end of the day- any security system will simply delay an attacker. A bank safe left abandoned would eventually be cracked one way or another.
2 minutes spent stalling a pick pro is pretty good!
@@lilsniper117 Yeah it is, especially considering how many locks he can pick in under five seconds.
Really? Thats long "procedde to open a grenade and ignite a dynamit" can it go down WITH ME?
Not to mention he'd have to pick more locks for the other wheels as well
Vares65 i mean one of the uses of locks is to keep honest people honest
This skateboard is more secure than most locks on this channel! 😂
Until you realize someone can still steal your trucks with an Allen wrench 😂
this was probably one of the best collaborations we have ever done! Thank you for coming out and filming with us. And huge insane props to Paclock for creating this masterpiece!
Our pleasure ~ we're grateful to have been a part of this!
It was a ton of fun, and great to meet the Braille crew after watching for so long. Thank you. 👍
Hmm yes this section here is made out of happy
@@AstralxIcy - Can say that again..
Hmm yes this comment section here is made out of happy
Next week on the Lock Picking Lawyer, "So then I asked the head engineer at PacLock what he thought of my plan to put one of their locks on a Porsche"
One day...
@@penguiin12 If you click on his name, you'll find that it's actually legit - Greg Waugh, President of Paclock.
LOL dude 😂🤣
@@penguiin12 I think so... it didn't really cost me anything to make the account actually.
@@paclockpres.9805 Goes to my comment just now, some end users do appreciate the time and effort you Great People put into a project like this. Thank you !
‘I can lockpick your house, your car, your bike, your skateboard...’
‘Excuse me, what?’
lol
LPL: but can I lock pick your heart?
@@shawncaldwell1480 No, but he can pick into your backdoor.
I hear LPL say,
"I'm going to put a tension wrench there just so I dont scratch this up. This is an absolute masterpiece."
Then I follow the link to the skateboard channel and see them trash the wheels by riding on it!
I was looking for this comment 😂
can we all admire that one of the longest picking sessions on this channel is now a skateboard wheel
The fact the locks actually take time to be picked here are a massive testament to their security.
That puck core was so resistant it took him almost a whole minute!
he was trying not to scratch it. but yeah better put it on everything u want secure
Lock was not defeated with a Lego astronaut, twig or by being dropped on its corner. LPL CERTIFED!
When your chilling upstairs in your room and you hear “1 is set, 2 is binding” by your locked front door
@6 6 Your comment makes no sense.
@6 6 You're the only illiterate one here.
@6 6 Edgy.
@6 6 What did he even say that was shitty grammar? It seems fine to me.
@6 6 Seems like you got it wrong about him being illiterate, but you're not man enough to admit it. Therefore you're insulting anyone who challenges you. How utterly pathetic.
“Avengers infinity war is the most ambitious crossover ever”
LPL: hold my pick
Hold this custom tool Bosnian Bill and I made
@@ancis1327 @heretustay 😂🤣☠️
Doesnt make sense.
It's kinda amazing how paclock's crew are all friendly and responsive
Cirno 9 Hashire sori yo
@@johnfrank3575 KAZE NO YOU NI
Tsukimihara wo
PADORU PADORU
BOOM
Respect to Paclock for giving LPL a new practice lock set. And trolling Master Lock.
@Stunt Dummy Look at 4:17
@Stunt Dummy People want more us made equipment and they are beginning to stock hardware stores like home depot. So yeah it might be a smart troll.
@Stunt Dummy Also take a look at the linked braille skateboarding video. LPL demonstrates "speed bypassing" to them on a bunch of Master locks. Opens about 5 of them as fast as he can pick them up off the table.
Stunt Dummy someone didn’t watch the whole video 🤣
This is epic. And man, those must be some DAMN fine locks if it takes LPL almost _two minutes_ to pick them!
"Forgot the keys for my skateboard. All of them."
Even the hex key?!
that skateboard is more secure than the whole Masterlock line up
you mean just one of the locks in there.
@@My1xT Half of one of the locks on the board is probably at least twice as secure...
@@ZenoDLC depending on how you value the pins. If a security pin values double a regular than a masterlock with 4 standard is a 4 and a pac is 12, so according to this entirely fictional metric more like half a pac is about 150% as secure as a master
@@My1xT as in seconds to open. I'm pretty sure it would take longer for LPL to disassemble that skateboard without keys than to pick Master's entire lineup
The hex bolt is more secure than a master lock
And you can see, in tiny engraved letters, the word "master sux". So casual. I love it.
Me: "The wheels are puck locks with holes in em, there's no way this is a serious video, surely it's an April Fool's joke"."
*Checks post date* "Hmm September. Better watch the entire video so I can be sure that I understand the joke."
"...it's a real skateboard, where's the joke?"
>MASTERSUX "There it is."
well that masterlo.. ahh master sucks is not really a joke but the truth^^
@@derstoffausdemderjoghurtis yes masterlocks are the joke and the punchline at the same time
"Make Padlocks Great Again"
"Mastersux"
Goddamn, Paclock is so based. With everything that I've seen from them, I'm absolutely going to give them my business next time I need some locks.
what is mastersux
Based? Like, "Jews bad" klanman based? Or just "I am a reasonable right wing citizen" based
@@TheDankEngineer the obvious one, that requires no wild jumps to conclusions. Statistically improbable that Tyler is one of the 00.0027...% of American citizens holding right-wing racial supremacist views.
Lazys The dank engineer Go back to reddit.
@@giin97 thank god for that
*_MASTERSUX_*
Well played, Paclock, well played.
Shots were fired that day.
Can someone elaborate please? I dont get it
@@pascalstiemer they are referring to master locks. And how shitty they are.
@@pascalstiemer Welcome, you must be new here 😁
I didn't get that at first.... But shit that's a hard roast
How I know a lock is secure:. Takes LPL more than 1'30" to open.
I actually think that minutes for LPL to pick could be a pretty reasonable security rating system. So for example, LPL1 would be good enough for most purposes, LPL3 would be high-security, and LPL-infinity would be "use this if you're truly paranoid."
LPL doesn't even bother trying truly secure locks, I mean security like a-abbot kaba quattro lock.
@@_to_dream_or_not_to_dream Definitely true that locks he can't pick tend not to make the channel. Honestly, I'd be really interested to see a rundown of locks he can't pick (especially ones that might still actually be slightly affordable for consumers).
@@kcStranger there's a few videos on his channel of locks he can't or hasn't picked, bowley locks come to mind. I think video 636 is one of them
Takes 1 foot and 30 inches to pick bahaha
"Hey man can I borrow your board for a bit?"
"Sure, but you'll need the keys to get it out of park."
When I was in high school my ex BF stole my skateboard I wasn't even sure why. This would have helped.
I love how a skateboard takes longer to open than a "High security lock"
To think that some companies today can still have fun while making money, unlike just chasing the cheapest options...
Well chasing cheapest option feels like short term strategy and can damage company reputation in long run, this on the other hand can be taken as kind of fun advert that will bolster their reputation and helps in long run.
These strategies usually tries copy customer needs, if general customers buy cheapest, or rather something with good reputation but larger price.
Good thing we have LPL, so we can see which ones are better(and learn some lockpicking on side).
@@belisarian6429 Often, ownership is the key here. If a company is privately owned or owned by an ESOP with no immediate intent to sell, there is often a focus on long-term viability. If a company is owned by an investment firm,, publicly owned without a clear majority shareholder, or the majority owner intends to sell, you will see a lot of focus on short-term decision making.
My employer is casually destroying its long-term viability with a strong drive to immediately increased sale value as we speak. They started this when they decided to sell and the buyer was an investment firm that is continuing the trend. Whoever owns the company when the bill comes due will probably make an initial public offer to offload the thing before it crashes, much like our current owner did with Uber.
The US economy is currently rigged to encourage this kind of economy destroying behavior and it does a fine job of making a few rich and many unemployed. It does have the benefit of making room for startups, though, so we have that going for us...
tfw a single wheel on this skateboard is more secure then my car xD.
and then your car what?
What happened with your car? What did it do?
These comments are saying “*than” just in a funnier manner
my new car is great, my old car didnt have remote entry and thus ate my key when it ultimately froze in the winter, also the window got stuck down and the wheels kept falling off it, twas a mess.
This reminds me when I was going to a class, I stopped at a store with my mom and I saw an acquaintance’s car. Apparently, I was the last one to see the car minutes before it was stolen.
I love this level of sheer crossover insanity. Lovely job all around.
Say it with me:
"LPL taking 5 minutes to pick a lock means the lock is great"
Ok..."LPL taking 5 minutes to pick a lock means the lock is great".
It actually took him almost a minute learn to count
Soon on locks packs:
LPL 3+mins
If it takes him a whole minute then it's great. I've never seen him take five minutes.
@@vojtechstrnad1 Bowley lock
“It would be a shame to damage such a masterpiece”
Haha, we all watched that Braille video 😂
Braille are not so good at filming they missed of LPLs head 😁
"don't want to scratch up this beautiful piece"
*Then he hands it over to the braille team*
According to PacLoc, they actually sent them a separate board than the one LPL has, and PacLoc has a third one themselves.
We all know that LPL can definitely do a kick flip on that skateboard and he’s just hiding it from us
Lock Picking Skater
When he’s saying 1 is binding and so on it reminds me of when the dentist starts telling the assistant the size of your teeth
When he uses the cavity machine on each tooth.
Will you ever collab with CGP Grey? I'd love to see neither of your faces in a video!
I'd love to see that as well. "Who thought these locks would work?" Or something
And this old Tony!
Now that's a collaboration I would never imagine happening.
This is the most wholesome collaboration I've seen in a long time
This may have just won the award for BEST VIDEO EVER from Lock Picking Lawyer.
What an awesome piece of pure art!
Hats off to PACLOCK for their humor and humanity!
I'm a wimp, but with 2 or 3 mates, we could probably just pick this skateboard up and walk away with it ... ... ...
But can you roll on it?
Yeah great, now what? Lol
@ArmchairWarrior i get the feeling it will be attempted
Are you blind?
@ArmchairWarrior actually, they did. check out the vid in the description
No one going to talk about how it almost took him 2 minutes to pick this thing?
Good lock plus the care to not wanting to scratch the "wheel". Still, a good example on how a well made lock makes even a skilled picker have to work for his meal.
It is a paclock, after all.
Minus 30 secs for trying not to scratch the thing )))
still picked it first try
I'd pick things slower if I was getting paid as well.
This is absolutely amazingly awesome! I've ridden BMX all my life and ran a skate shop/park for a number of years so I would say that the alternative sports industry runs deep with me. I've been watching LPL for a couple months now and this has got to be the sweetest thing I have ever seen!
This is so awesome! Excellent collaborative effort. The time alone spent on the CAD. Not to mention the machining and anodizing. The Icing was the laser etching, I haven't giggled like that in a while. Well done, gentlemen!
Amazing! So glad to see you and Aaron/Brail collab! 🙏
Thanks for your blessings jesus
Wait, what Is jesús doing in a lockpiking channel?
@@brunoarielmicolis1095 looking to pick your door locks
Loved the collaboration, its wonderful seeing such great channels come together!
You've been in the top 20 comments twice now
LockPickingLawyer - "This is an absolute masterpiece and would be a shame to damage it"
Braille Skateboarding - **Ollies** **Kickflips for 4 minutes** **Ledge grinds**
Culminating in the wheels no longer working because of the abuse.
Lets be real here.
This is probably the most secure thing ever featured on this channel.
Oh man when you pulled out the deck I almost fell on the floor laughing
Jacob Feiner I thought that this deck was pretty sweet,
Definitely original 👍
I get the same reaction from the ladies when I pull my deck out
Worst skateboard ever. :)
Noctis Motus your not some type of poser, are you??🤔
Just curious 🤔
@@interwebtubes Haha. If you rode, you'd know that setup is shit. It is just a gimmick for shits and giggles and nothing to be taken too seriously. If there is a poser here, that would be you. :)
2:07 I love that you were worried about scratching it up and then going over to the other video and seeing the locks after they used the deck :D
As paclock stated, there were 3 copies of this board. One for paclock, one for LPL, and one for the skateboard people.
@@compactcow ah... missed that
When your lock has a better customer service and good relation to you than your insurance company.
dont use insurance. How you live your live should be your insurance.
I never knew this colab could ever be possible!
That Master trolling is awesome.... Master lock must be like the honey badgers and they just don’t care.
As a skater myself this is something I want hanging on my wall as a conversation piece l. That is awesome
It's so good to see with how much respect you treat the craftsmanship in this piece of art. This one was a real joy to watch 👍
Pacock seem to be a great responsive company! Good to see them having a bit of fun with the community!
Will definitely have to try source a lock or two from them in Australia!
He probably doesn't have house keys his picks his way in
Why have a house though, just choose an empty one.
No no no you all got it wrong.
He has supreme high security locks, but they automatically open he WISHES to.
You never pick your own locks.
I believe it was one of those designed with the construction key waffers that seize when you dont use the key. Scroll through his vids he made one showing how to do it.
I bet he has abloy protecs on the doors into his house.
PACLOCK and LPL Joint Statement: Here is the world's first skateboard lock, designed to prevent theft.
12-Year Old: Picks up skateboard, puts it under armpit and walks away.
PACLOCK and LPL: Ah 🤔
Imma get r/woosh'ed, but the wheels cannot be moved either way and cannot be replaced since the mechanism is covering the screws.
Edit: R/woosh to me. I am blind and did not see the bolt that hold pretty much the entire thing.
Edit 2: ᵐᵃˢᵗᵉʳˢᵘˣ
@@niccatipay Well I mean, if you picked it up and walked away with it you could use a heavy duty attack on it at home.
@@TechnoMinarchist Imagine...
Assault locks now banned.
All locks must now be made out with a soft shell and weighs no more than 300g.
All joking aside.....your point is absolutely valid! This will never work for obvious reasons, and is just a gimmick
Yeah, and then you have a skateboard with no wheels. How awesome.
When a literal skateboard is the one of the only locks that takes LPL more than a minute to pick
I as a longboarder would die for something with this much simple quick swap design if it could be as smooth as a normal cruiser setup
One backpack (with room for personal storage), and you have an infinite potential for possibilities
"mastersux"
LOL
The guys at paclock are slowly but surely winning my heart, that was quite epic.
Both of these videos (This and the actual skateboard vid with you teaching them to "pick" at the end) were a lot of fun to watch. Thanks!
"And it would be a shame to damage it."
>see skate video on this board
Y-yeah... Yeah, a real shame.
It’s nice to hear that the head engineer actually has some experience in a world that requires you to keep things protected. He’s not just some idiot that doesn’t know what he’s doing
Everything about this vid is awesome. Good stuff LPL and PacLock
Omg two of my favourite channels doing a collaboration like this.... My day is made, thank you both
Everyone at the skate park:
LPL:2 is binding 3 is loose.
LOL!!! That was truly wonderful! The fact that Paclock did this shows that they have some truly wonderful corporate culture, and makes me much more inclined towards their products! Great job!
Dang! That skate board is more secure than my bank account!😂
more secure then money ever can be. It relies on trust for strangers.
This made me look at some master padlocks I have at home. One of them I dont know I can, but I can turn the core without doing anything, not bypassing nothing. Just stick something in and turn thats all thats needed.
Sweet my two favorite channels in one! Thanks LPL!!!👍😎
What an amazing company. The world needs more like them.
Loved the braille collab, keeping your face out of frame is so on brand. Keep up the great videos
"It would be a shame to damage it." Lol, you haven't seen too many Braille vids have you? Haha
Isn't it amazing to see such inovative and crazy ideas getting realized? Besides, picking that wheel alone took longer than some of your other picking videos. Looks like they know how to build a lock.
No way! hahaha, that is awesome.. Totally didn't expect to see that when I watched the latest you make it we skate it.. I was BLOWN away, lol... I'm also not a skater but still watch their channel. Great work buddy :D
that has to be the coolest cross channel piece I've ever seen ! It also speaks volumes as to just how totally awesome the people at Paclock are. The amount of time/labor/cost of that board is not something most companies would put into a one-off.
As someone who always has ideas of redesigning objects and is constantly breaking things, I love the personal connection Greg has with potential customers. My next locks will be Paclock.
This has to be one of the best above and beyond video collabs I've ever seen!! Props!
I spit out my coffee when he zoomed in on that engraving. Well played paclock, well played.
One of the coolest skateboards I have seen in my life👌 Very cool of Paclock to build that for you, what a great company!
Lol Master trolling that is next level and very true 'MASTERSUX' 🤣
Just watched you on modern rouge. Loved watching Brian get excited about how easy those locks were to bypass! Good stuff!
This is the coolest thing I've ever seen, I've wanted a Paclock ever since I saw you do a video on them, and I just bought one on Home Depot's website because they didn't seem to come to our store even after all the time I waited. Well I can't wait for it, they seem like an awesome company and I am happy to support them, thanks for introducing them to me :)
that shot at master lock was priceless xD
Lock Picking Lawyer picks open a skateboard, I never would have imagined seeing this day...
"This is an absolute masterpiece, it would be a shame to damage it." And then he sends it to Braille.
I'm a bit of a Skateboard Collector and I would love this. What amazing use of locks to make a Board. I could look at that all Day and not get bored.
Knowing my favorite guilty pleasure of TH-cam enjoys Braille as well makes me happy. I love this channel so much
Lock picking lawyer collaborating with some of the coolest cats on TH-cam.
Now this is cool. I have been thinking of a way to secure my backyard observatory and I think I know which locks to buy!
Your video on braille brought me to your channel and 3 days later now im buying my first lock picking set. Im hooked.
Saw this video with a smile on my face from start to end. Well done!
This is what god intended when he let Al Gore invent the internet.
locks, keys and lockpickin are really great metaphors to use when talking about the spirit and god.
lol One of the longest pick times I've seen him work on. People take their skateboards seriously
LPL I think you're really onto something here. Would love to see more themed collabs with other TH-cam channels (especially if you can convince paclock and other companies to make custom locks)
Not a skate board fan but gotta appreciate the engineering and craftsmanship that would require to make something like that. Literally reinventing the wheel. Great work
Exactly how to advertise your product efficiently.
Cool to see you build such a great relationship with paclock. Funny and entertaining video!
Everything about this collab has me grinning from ear to ear. Well done!
This is the coolest collaboration EVER. Braille is absolutely the sickest yt channel for skate tutorials and sick games of SKATE. Top tier content
LPL: I don’t want to scratch it, that would be a shame.
Also LPL: *gives it to Braille for their „you make it, we skate it“ series*
I didn’t know that, thanks for the info. Now LPL’s statement makes sense.
Paclock, well played. My first lock I ever picked was a cheap 'hyper tough' padlock. The tools I used were an Allen wrench that I shaped into a pick and another Allen wrench that I turned into a tension wrench. The second lock I ever attempted and picked was my dad's 20ish year old masterlock padlock. So yeah, that laser etched troll was what I needed!
Your collabs are absolutely hilarious lately. I'm a fan of modern rogue, and now a fan of braille too. This is hilarious.