Thank You for the Video. My vac was "Rode hard and Put away wet" as the cowboys used to say. I spent way to much time trying to figure out how to disassemble it to replace my brushes. That Nut was rusted and the hole for the Allen wrench was completely useless. After too long I finally got it but still cannot get the "Spacer" off. When I saw you just lift it off I was shocked. I guess I need a lot more PB spray
Ebay's good wherever they have them or use just going google and just type in or say you know , ridge vacuum cleaner motors and a chicken won't pop it up , and then you can go from there to pick on which one got the best price
Damn i wonder if that's what happened to my vacuum. I was using it and it started to sound a little weird and smelling like something was burning and then it just shut off. It was my dads so it's a older model but it worked fine. Should I try to fix or just buy a new one?
I found it on eBay here's the link. www.ebay.com/itm/224893643322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1OF02YvTQAW&sssrc=4429486&ssuid=0lJYiIDlQkK&var=&widget_ver=artemis&media=MORE
The funny thing is, it's listed for different prices online here where I'm at in NJ. Then the motor is listed as $76. But a new one here, same model is $99. Then there's other sites that list it at more. That's because Ridgid, like most other companies, makes cheaper versions of the same tool.
Get one from Home Depot and return the broken one. I believe it’s a house brands so they honor their lifetime warranty for all of ridgid even if it’s from Amazon it’s Home Depot’s
I found it on eBay here's the link. www.ebay.com/itm/224893643322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1OF02YvTQAW&sssrc=4429486&ssuid=0lJYiIDlQkK&var=&widget_ver=artemis&media=MORE
You sure about that cause my type of shop vac cost 208.00 dollars and the motor to replace it was way less than that. In fact it was under 100.00 dollars.
Thank You for the Video. My vac was "Rode hard and Put away wet" as the cowboys used to say. I spent way to much time trying to figure out how to disassemble it to replace my brushes. That Nut was rusted and the hole for the Allen wrench was completely useless. After too long I finally got it but still cannot get the "Spacer" off. When I saw you just lift it off I was shocked. I guess I need a lot more PB spray
You are the repairman gangster! 🙏 🙏 Thank You
@@michaelzaug8750 I never been called before.Thank you , though i'm glad I could help you out
@@michaelzaug8750 If you?
Think that's good.Watch them other videos that I work on vehicles and you'll see
Thanks
Welcome
Great video, thanks. What's a trustworthy site to buy shop vac motors? I have
Rigid 16.5 Gallon shop vac, MODEL MOB16000 120V 12A 60Hz.
Ebay's good wherever they have them or use just going google and just type in or say you know , ridge vacuum cleaner motors and a chicken won't pop it up , and then you can go from there to pick on which one got the best price
Good Video thank you 👍
Welcome
Damn i wonder if that's what happened to my vacuum. I was using it and it started to sound a little weird and smelling like something was burning and then it just shut off. It was my dads so it's a older model but it worked fine. Should I try to fix or just buy a new one?
Using a filter will greatly extend its life. Use a bag with a filter and you go further.
@@LL-mt2nz Okay that's good to know thank you
Can you tell me the part number for the motor you used as a replacement for your rigid vacuum cleaner
I found it on eBay here's the link. www.ebay.com/itm/224893643322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1OF02YvTQAW&sssrc=4429486&ssuid=0lJYiIDlQkK&var=&widget_ver=artemis&media=MORE
My problem is putting back the spacer on the vacuum is seem the middle part became to short how I fix that
Got ya
@@fixitdaniel any tips?
@@yahalk2088 Have you tried adding another space to that gap
@@fixitdanielnow sure what you mean but when I put the spacer that hold the metal bar between the two screws it comes off short
Like there is gap in between but I don’t know how can I fix that gap
Is that the 12 gallon model?
I believe so
The funny thing is, it's listed for different prices online here where I'm at in NJ. Then the motor is listed as $76. But a new one here, same model is $99. Then there's other sites that list it at more. That's because Ridgid, like most other companies, makes cheaper versions of the same tool.
@@christopherseigel6693 humm interesting
Kool where you got the motor from??
Ebay I think
Got a new RIDGID from Amazon. Wet/ dry vacuum. It’s not working 😩😩😩
I'm sorry to hear that.
Get one from Home Depot and return the broken one. I believe it’s a house brands so they honor their lifetime warranty for all of ridgid even if it’s from Amazon it’s Home Depot’s
So where did you get the spare parts?
I just went to google and said Ridgid vacuum motors and just match up the right motor with the one I had and found it.
Here the link for the motor .
www.ebay.com/itm/224893643322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1OF02YvTQAW&sssrc=4429486&ssuid=0lJYiIDlQkK&var=&widget_ver=artemis&media=MORE
Where did you find a motor?
I found it on eBay here's the link. www.ebay.com/itm/224893643322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1OF02YvTQAW&sssrc=4429486&ssuid=0lJYiIDlQkK&var=&widget_ver=artemis&media=MORE
When I started looking at prices for replacement motors they cost just as much as a whole new vac so why bother
You sure my vac valve was $200 new were a new motor cost a third of that price.
the motor cost just as much as a new vac
You sure about that cause my type of shop vac cost 208.00 dollars and the motor to replace it was way less than that. In fact it was under 100.00 dollars.