Quick question, if you set an MDA for the VOR Overlay approach, will the AP auto disconnect below MDA? I have found this happens when flying these approaches so far.
Interesting. Were there actually any A310s that were certified to fly LNAV/VNAV approaches? The only A310 FCOM I've ever seen said "profile mode must be disengaged prior to the FAF" and "final app would be used to allow the aircraft to descend below the faf altitude if you were allowed to use it. you're not. don't press this button."
It is my understanding that since the RNAV approach relies on GPS waypoints, you may be offset from the runway if the scenery designer did not position the runway perfectly with the real world counterpart. There is also an offset in real life due to GPS accuracy but not that much.
Dear, after about 7 min in your video for an RNAV approach in Toulouse (VDM32R), you press PROFILE and P.DES appears (under ALT). I do the exact same thing but when I press PROFILE both P.DES and P.THR appear. The speed goes up to 250. The A310 follows the route (NAV-MODE) but will not descend. Past the FAF, the aircraft holds 3000 feet. What am I doing wrong. I have tried this 10 times but it does not work. An ILS and VOR approach do work. I have also tried pressing the ALT button with the middle mouse button but P.DES does not appear either. Thank you for your help! Erik - Belgium
Will this at any point be compatible with the MSFS IFR flight plan mode? I'm a relative newbie to flight sim and I really wanna fly this beautiful plane and it's quite a steep learning curve. (which is good)
No, most payware planes are not compatible with MSFS’s built in planner. You must manually input your flight plan and everything. You should also stick to easier planes before jumping into this highly complicated, high fidelity aircraft.
@@iniBuilds agree simbrief ofp on the tablet would be very useful also an option to change the fuel to our liking cause the slider is not precise enough
@@madriditunes7021 Hahaha. And a yoke too 😉 but this is the beauty of this aircraft... Steam guages with some technology. It does have autothrust though...
Fantastic job on this plane, simbrief for the FMC on Xbox is a huge step forward, works great 👍👍
This plane is just amazing!
Thank you captain for this nice training video
Extremely helpful. Thank you for that.
bravo avous félicitation pour votre travail.
Is there any chance to change RNAV to a 4.5 degree approach instead of 3.0?
Quick question, if you set an MDA for the VOR Overlay approach, will the AP auto disconnect below MDA? I have found this happens when flying these approaches so far.
Anyone know how to operate Sim Rate increase/decrease in this aircraft? The usual way doesn't seem to work
Interesting. Were there actually any A310s that were certified to fly LNAV/VNAV approaches? The only A310 FCOM I've ever seen said "profile mode must be disengaged prior to the FAF" and "final app would be used to allow the aircraft to descend below the faf altitude if you were allowed to use it. you're not. don't press this button."
Is DH setting a must? Forgot to set it and it didnt follow the approach as expected.
Ps stunning aircraft!
Is it expected that the RNAV approach will not be centered with the runway? I see that in this video and also in my own experience in MSFS.
It is my understanding that since the RNAV approach relies on GPS waypoints, you may be offset from the runway if the scenery designer did not position the runway perfectly with the real world counterpart. There is also an offset in real life due to GPS accuracy but not that much.
Does fpa work on the vor approach as alternative for v/s? Tried fpa once but not in final approach and the aircraft didn't react in any way
The fpa is just a bird cage displayed on the PFD and is just for visual aid AFAK. It doesn't work on the a310 currently.
Would it be possible to put the videos in sequence for a better study and understanding?
Dear, after about 7 min in your video for an RNAV approach in Toulouse (VDM32R), you press PROFILE and P.DES appears (under ALT). I do the exact same thing but when I press PROFILE both P.DES and P.THR appear. The speed goes up to 250. The A310 follows the route (NAV-MODE) but will not descend. Past the FAF, the aircraft holds 3000 feet. What am I doing wrong. I have tried this 10 times but it does not work. An ILS and VOR approach do work.
I have also tried pressing the ALT button with the middle mouse button but P.DES does not appear either.
Thank you for your help! Erik - Belgium
press the PROFILE then depress it again
Will this at any point be compatible with the MSFS IFR flight plan mode?
I'm a relative newbie to flight sim and I really wanna fly this beautiful plane and it's quite a steep learning curve. (which is good)
No, most payware planes are not compatible with MSFS’s built in planner. You must manually input your flight plan and everything. You should also stick to easier planes before jumping into this highly complicated, high fidelity aircraft.
It's all about learning about Airline Flights, Right? ✈️
Does anyone know how to stop the autopilot alarm from going on and off after you disengage it 🤔
Please click the red button on the yoke.
When i disconnect autopilot the autopilot disconnect sound keeps going off any way to stop it ?
Be sure to click the red button on the yoke to turn off the alarm!
Can it fly an RNP approach or is the plane «too old» for that?
Technically (in the sim, at least) she can fly them to LNAV/VNAV minima as RNAV overlay approaches
Please add navigraph charts and simbrief flight plan to the EFB.
SimBrief functionality is already present, please see: forum.inibuilds.com/topic/5957-does-the-a310-for-msfs-have-cpdlc-functionality-simbrief-integration
@@iniBuilds Yes sorry I mean the option to see the flight plan brief on the EFB is not present.
@@iniBuilds agree simbrief ofp on the tablet would be very useful also an option to change the fuel to our liking cause the slider is not precise enough
Does this have the same systems simulation level as xplane?
Hi Ahmed, it does indeed, and even exceeds it in some areas!
@@iniBuilds Wowww! Thank you guys! Is the 300 coming some day too?
when i try to put anything into the FMC my game just crashes
Hello. Please ensure you've updated your navdata using Navigraph.
How do you know what heading to input while doing ils❓
it depends on the airport
Does the simbrief work on xbox
yes it does
I miss mcdu to show the distance to T / D
Why are the cockpit camera angles so ass
This plane AP not following flight plan
When i disconnect autopilot the autopilot disconnect sound keeps going off any way to stop it ?
Press twice
@@Ahmedblaser i did what u said and it worked thank you that was driving me nuts lol
No problem mate... We've all been there one day. Have fun!
@@Ahmedblaser Not very Fly by Wire (only Toga) 😂 NO Autothrust (Max climb CL).... But Lovely 🤭
@@madriditunes7021 Hahaha. And a yoke too 😉 but this is the beauty of this aircraft... Steam guages with some technology. It does have autothrust though...