JLB Cheetah How To Remove Stubborn Shock Cap & Suspension Rebuild!

What’s going guys...in this video I’ll be showing you guys some tips on how to remove stubborn shock caps and rebuild the shocks suspension on the JLB Cheetah. It took about an hour to complete the job. The longest part was washing and drying all the internals for the shocks. Make sure to stay tune for the next wrenching video on this truck. Like, Subscribe, Stay Safe, Cheers!👍🍻👊🙋‍♂️
Here's the link to the previous video before the Damages:
• JLB Cheetah Gen1 Rippi...
Proline 3.8 Badlands Desperados: ebay.us/Yb5xTl
JLB Cheetah 4x4 RC Truck Upgraded 120a RTR With 3s Battery:
www.banggood.com/custlink/DGD...
HW EZRUN Waterproof SC8 RTR 120a ESC:
www.banggood.com/custlink/vmv...
Dumbo RC X4 2.4ghz 4ch Radio System With X6F Receiver:
www.banggood.com/custlink/3G3...
GX3225MG 25kg High Torque Digital Steering Servo:
www.banggood.com/custlink/Gv3...
Aluminum 28.3mm 25T Steering Servo Arm Horn:
www.banggood.com/custlink/DGG...
Replacement Diff Set Part#EA1057:
usa.banggood.com/custlink/G3D...
Replacement Front Driver Set Pinion Gear Part# EA1056:
usa.banggood.com/custlink/DmG...
#jlb cheetah #rc monster truck

[@renercadventures]

Excellent video my friend 👍😍

[@tonyynot484]

nice

[@tonyynot484]

btw, you can use a hot-glue in between the motor and the chassis to protect the motor mount from the vibration of bashing

[@DoRC]

If you take the bottom shock eye off there's no need to take the shock piston off the shaft

[@MrKen-sj5qi]

Hi RC. Are those Proline Badland tires you've got there? Can you send me the info on them. Are they an easy fit? How do they run? I'm looking for something more aggressive than the stock tires. Thanks!

[@rithviktalakayala4593]

How do you replace central driveshaft because my driveshaft pin is coming off and I’m pushing it back with a player? Your vids are helpful.

[@ItsRCTeng]

Stay tune video on that coming soon

[@Dirk_072]

Hi I got a question I jump me cheetah a lot but the shock dempers neet some new olie I don’t now if I neet to get 80Wt or 100 Wt I jump hard. And how Many ml do I neet for all 4 shocks.

[@ItsRCTeng]

It’s depends on the shocks too. The heavier the weight of the oil can cause the shock shaft to bend under pressure during lands. My setup on my cheetah is 30-50wt with 50 being at the rear and 30 at the front. The back suspension takes a lot of abuse during acceleration and jumps. Hope this helps. 👍

[@Dirk_072]

@@ItsRCTeng thanks mate