The open top bags are just awesome for access, especially if you like to leave the bag on the truck or in one location on a Jobsite. Just super easy to work out of 😁 Thanks for checking it out!
Great video again. Its good to have a larger bag with more room, to make the tool storage neater and easier to use. But you really do have to be quite disciplined in limiting what you put in to avoid making it to heavy. Wouldn't want to carry around that OT-LC if you fill it out in the same manner as that OT-MC.
Great video and content. I watched the plumbing load out video too and was wondering if you could share more about dual sided threaded 1/4 turn wrench? Looking to pick one up but not having much luck finding one. Thanks much!
Quality content yet again. Watching your Chanel has been bad for my wallet 🥲 torn between this guy and the pro pac LC. Any thoughts either way? I very rarely need power tools for my work.
I’m loving all your videos! I’ve been binge watching them lol. I’ve got a couple questions for you: How are you liking the pistol grip Wera ratcheting driver? Same question for the 4 times the rotation Wera driver. And last question, I promise, can you do another edc video soon?
Thanks a ton!! The pistol grip driver is nice if you need a lot of torque on a screw. Mainly for Allen key situations or torx in my opinion. Phillips and flat it’s really overkill as if you need that much torque they’re likely about to strip anyway. The 4x Wera driver I have very specific uses for and it’s absolutely great for those things. It’s a limited use driver though for sure because you have almost no torque availability unless to switch it to standard mode. It’s good for running down long machine screws though and that’s what I love it for. Hopefully that helps? I do have an upcoming video on that driver where I’ll stress what it’s good at and not good at so hopefully it’ll be a lot clearer. That thing is pricey to buy and find out it doesn’t do what you thought it would 😅
Hey mate, all you’re other bags or not used bags that have been demoted! Or just been through the wars is there any chance of getting one second hand! Would be great to hear back
I have a few that I need to probably pass on at some point, for me sometimes they’re nice to have on hand so I can show bag differences and things like the TP-LC video where i was able to show it versus most of the other TP size bags and things. I’m still determining what to do about that 😅
I still wish I worked for u and not myself, then I might get some bags u don't want, I keep adding to my plumbing bag, it's getting heavy, so I understand, u need to buy some Martinez titanium hammer and pry bar, I want to try the pry bar it's costly but want to see how tough it is.
It’s so rewarding working for yourself though! You’d miss it more than you think. A long time ago I made a few videos on the business side of things and they’re still here on the channel, but one tip Id have would be to add a cost to your hourly or daily rate specifically for tools just like you do for withholding taxes and things and absolutely dedicate it to that purpose. Put it in an account every week and then your customers buy all your tools indirectly and you dont feel it as much. That really helped me anyway ! Have an awesome weekend!
@@MillisConstruction yes, I started that a few months ago, I am getting tired of using my high end tools and nothing for it, I was thinking of buying a lift and doing the same when I use it on the job, ladder's suck all the time.
I did one on the cab recently, maybe a month or two ago? I have an updated bed video too but haven’t gotten far enough through these veto bag ones yet. Wanted everyone to know about the promo and all before that ends for sure
The OT-LC is my all-around electrical bag. Hard to beat it. I used to use the Tech-LC, but the OT style works better for me.
Great looking bag. Next one for me for sure!
Another good video lots of information, thank you.
Just ordered mine. Can't wait for it 😀
Had this bag for a few weeks now. It's a great upgrade for sure!
I’ve had the OT-LC for a couple of weeks now. Using it as my everyday bag. I’m a carpenter specializing in remodels. Loving it!
The open top bags are just awesome for access, especially if you like to leave the bag on the truck or in one location on a Jobsite. Just super easy to work out of 😁 Thanks for checking it out!
Dude im not sure how you find the time to work, when your are constantly uploading quality content almost daily!
Haha I wish I could do daily! I’m lucky to hit my Friday at 5 pm goal every week 😅
Great review ! thanks!
Great video again. Its good to have a larger bag with more room, to make the tool storage neater and easier to use. But you really do have to be quite disciplined in limiting what you put in to avoid making it to heavy. Wouldn't want to carry around that OT-LC if you fill it out in the same manner as that OT-MC.
I used the ot-mc for years. I recently swapped to the tp xxl. I had issues with the ot flipping over in my van all the time.
Great video and content. I watched the plumbing load out video too and was wondering if you could share more about dual sided threaded 1/4 turn wrench? Looking to pick one up but not having much luck finding one. Thanks much!
Another great video-keep reviewing good stuff… it just means I have to spend more money😂😂😂
You and me both! It’s almost an addiction 😬
I like it
Quality content yet again. Watching your Chanel has been bad for my wallet 🥲 torn between this guy and the pro pac LC. Any thoughts either way? I very rarely need power tools for my work.
Nice bag Josef, just saw you on Philly Fixed's channel 😎🛠️😎🛠️😎
Very cool! I just watched that video after you said that. He’s got a great channel over there
@@MillisConstruction 👍👍👍
Great looking bag. Makes me want one. Are there tools that you find don’t fit well into this bag? Drill? Prybar?
Longer tools are definitely difficult. I think this one will hold my impacts and things definitely better than the MC version, it was tight
right. seems like a shitty bag for hammers and pry bars..
I’m loving all your videos! I’ve been binge watching them lol. I’ve got a couple questions for you: How are you liking the pistol grip Wera ratcheting driver? Same question for the 4 times the rotation Wera driver. And last question, I promise, can you do another edc video soon?
Thanks a ton!!
The pistol grip driver is nice if you need a lot of torque on a screw. Mainly for Allen key situations or torx in my opinion. Phillips and flat it’s really overkill as if you need that much torque they’re likely about to strip anyway.
The 4x Wera driver I have very specific uses for and it’s absolutely great for those things. It’s a limited use driver though for sure because you have almost no torque availability unless to switch it to standard mode. It’s good for running down long machine screws though and that’s what I love it for. Hopefully that helps? I do have an upcoming video on that driver where I’ll stress what it’s good at and not good at so hopefully it’ll be a lot clearer. That thing is pricey to buy and find out it doesn’t do what you thought it would 😅
Hey mate, all you’re other bags or not used bags that have been demoted! Or just been through the wars is there any chance of getting one second hand!
Would be great to hear back
Tha is right
Is this there new plumbing bag they juat came out with? I think they just came out with a plumbing bag. Either way very nice set up.
Im using this as my every day carry at the morning joseph. Im trying to use it as a one bag does everything bag
It’s definitely nice to see everything at one time !
does the larger one even fit a hammer?
The OT MC would work well for me. Wanna send me it, Josef? 😉
I have a few that I need to probably pass on at some point, for me sometimes they’re nice to have on hand so I can show bag differences and things like the TP-LC video where i was able to show it versus most of the other TP size bags and things. I’m still determining what to do about that 😅
I still wish I worked for u and not myself, then I might get some bags u don't want, I keep adding to my plumbing bag, it's getting heavy, so I understand, u need to buy some Martinez titanium hammer and pry bar, I want to try the pry bar it's costly but want to see how tough it is.
It’s so rewarding working for yourself though! You’d miss it more than you think. A long time ago I made a few videos on the business side of things and they’re still here on the channel, but one tip Id have would be to add a cost to your hourly or daily rate specifically for tools just like you do for withholding taxes and things and absolutely dedicate it to that purpose. Put it in an account every week and then your customers buy all your tools indirectly and you dont feel it as much. That really helped me anyway ! Have an awesome weekend!
@@MillisConstruction yes, I started that a few months ago, I am getting tired of using my high end tools and nothing for it, I was thinking of buying a lift and doing the same when I use it on the job, ladder's suck all the time.
Acme Tools having a 10 % off sale on Knipex
Do a truck loadout video
I did one on the cab recently, maybe a month or two ago? I have an updated bed video too but haven’t gotten far enough through these veto bag ones yet. Wanted everyone to know about the promo and all before that ends for sure