Excellent video. I build an electric bike of an airboard engine and have a small question: how to connect the cables for "self study, speed isghel, and brake high" from an engine controller to airboard engine thankful in advance
NIce work. Thanks for the post and the link to the speed controller. I was able to convert a hoverboard motor to an electric bike with some help from your information.
I’m making an electric longboard with the wheels and I have a few questions. I am using the hoverboard 36v battery, I order to charge it should I just connect it to the main logic board and then into the charger. Is it safe without the wheels or gyroscopes hooked up. Second question is, I’ve been looking everywhere and is it possible to connect an RC receiver instead of using an E-Bike throttle. I don’t want to use a cord while riding a skateboard/I would have to use two throttles because of both the controllers since I’m doing a dual wheel setup.
Rohan Sharma I have been trying to do the same thing. I read online that the e bike throttle plus wire is 5v and that the receiver can handle 6 volts. So it should be ok, but correct me if I am wrong. Mrcop said in a comment down below that you can charge the battery with the original charger if you cut of the original charger plug (or put it directly on to the battery wires).
@@douwejansen7278 how to know the charging time? Level? The charger has 3 pins and need to be plugged into its connector. How to connect directly to the battery?
does it turns with the controller much faster than the og motherboard on it??? and additional the battery is 10s lipo , what the controller specs are? your links not working anymore...
I seem to have mine set up in the same way, but when I turn the throttle it only makes three clicking noises and the motor doesn't move. Any idea why this could be? My motor controller also seems to have many more wires than your model
I'm doing this same test everything is connected but I still have no motor response My ebike controller has no power switch cable Should I solder the hoverboard main power line to the red positive battery line?
The wheel needs to know what speed it's going at in order to adjust its torque, otherwise it's just going to keep increasing its speed even if you hold the handle steady. Does it do that?
will amadio it cannot work directly from battery power as this is brushless motors and and least u need controller wich one can simulate sensors job so it can work without these 5 vires :)
hey MrCop you had any luck with brakes. my controller says yellow wire to ground. but when I do this just turns the throttle off. I'm guessing there is an electronic braking mechanism built in to e bike controllers I might be wrong. any ideas ?
I got a similar question. When normally driving a hoverboard, you can brake down pretty well. Is this an actual braking mechanism or is this basically "reverting" the motor direction with full speed? I am working on a similar project and i would like to have an electronic brake in a hoverboard wheel. Thanks! :)
No. Too much power consuption. Use one driver for either Motor and one throttle for both. Search dual controller one throttle. White cable signal is common to the 2 controllers battery goes in parallel to the two controller and red and black of throttle only from one controller
Yes that's why he connected an ebike esc.( electric speed controller) unlike the hoverboard esc, you can connect a throttle and not have the gyros in the way.
Ozule if ur controller is smart and have option to work without hall sensor wires so u don’t need, but keep in mind if u have speedometer that comes with controller without hall sensor wires it wont show speed, milage etc.
Yes, I tried, only the direction of rotation changes, when I tried it on my drift trike has no acceleration it seems that the engine runs idle. I have a 36V 350W control unit
I followed the colors of the 5 wires but it does not change anything. can you tell me that tention must come out of those 5 wires? perhaps the unit that I have is not 'suitable anywhere I would not bother you over you have been very kind and I thank you.
☠️ I've been experiencing extremely dangerous episodes of the motor not stopping as soon as I turn the throttle , related to high humidity conditions ! I think it's because the humidity increases conductivity of the hall sensors in the throttle . can you recommend a good throttle ? I think the manufacturers are going to have to make them water proof. I experienced the same issue with a different throttle , battery and controller. just using the bike after a rain storm is enough to cause the issue. We must have a throttle will a switch to cut power ! ☠️ Also stop using hot glue on the Hall sensors ! It melts were I live ! And make the throttle not Fall apart so easy , and they need to be made with softer grips or made to accept normal grip's.
Hi. Im building something like that, but does anyone have any idea how to charge a hoverboard battery out of the hoverboard? Some type of a balance charger?
@@MrCopcreator If i have the battery, the blue one, but no hoverboard, you cannot charge it, because the ends are not the same. The hoverboard has an XT60 female ending, but the charger is some 3 pronged circular thing that connects to the actual hoverboard. If I don't have a hoverboard, but I have a battery, how do I charge it?
@@AbidR oh man if u having problems with charging already so what next u gonna do? 😊 charger plug in hoverboard u need to use it has 2 wires going out, this 2 wires gives u positive and negative. Connect them to battery +with+ and -with- and plug charger to wall and it will charge ur battery 👌
MrCop the same battery as in the video? I am struggling if my battery will handle the current for two motors and controllers. It is about the contionous discharge . My battery has 20 ampere but the 2 controllers have 18 A maximum. The motors are 350w 36v.
Buongiorno Le sarei grato dato che misono cimentato a costruirlo ma dopo aver collegato centralina eccc Come accellero quando arriva verso il max fa un rumore e si ferma Poi o notato che quando lo spingo un po' si spegne e devo riagganciare e sganciare batteria Perché... Mi puoi aiutare Ho usato le ruote e la batteria di un hoverboard Grazie
ok I have some wheels from a Hoverboard and I just need them to go forward and backward for a halloween custom I use window motors but not strong enough with the window switch it work but not enough power every year I compete at clubs
alright thats what i thought. I am thinking about making electric scooter but I dont know if Its okay if I use one wheel(for uphill) or should I use 2 wheels.
Alex Okh u need two controllers, both connect from same battery, and one throttle for both controllers, next connect each wheel to controller and there u have it 👌
No family or friends and the duration is longer than usual suspects in a dress is what it is about th12 that's rare asf to watch idk how it works out for a clan buddy I can sign into the isaac1307 epic games KILLERD2901
Excellent video. I build an electric bike of an airboard engine and have a small question: how to connect the cables for "self study, speed isghel, and brake high" from an engine controller to airboard engine thankful in advance
dont recomend fail i tried.
NIce work. Thanks for the post and the link to the speed controller. I was able to convert a hoverboard motor to an electric bike with some help from your information.
Brian Burzynski glad my video was helpfull
How do you manage to charge the battery? You use the hoverboard circuit board? How do you know charging is complete?
Thank you for the info I was looking for it.
BUT IS HET RUNNING FORWARDS EN ALSO BACKWARDS OR ONLY FORWARDS.?
GREETINGS
Forward, but why would u need revers on electric scooter? 🤣
@@MrCopcreator to brake
Brilliant! Is that a Kelly controller? Couldnt you use the controller from the hoverboard?
Hoverboard controller does not have connection for throttle, insted of that controller uses gyroscopes for adjusting speed
Hola 1 vida y todos y todas, me gustaría saber cual es la canción que suena, llevó días escuchándola y esque lleva tu mente a otro lado , saludos!
I’m making an electric longboard with the wheels and I have a few questions. I am using the hoverboard 36v battery, I order to charge it should I just connect it to the main logic board and then into the charger. Is it safe without the wheels or gyroscopes hooked up. Second question is, I’ve been looking everywhere and is it possible to connect an RC receiver instead of using an E-Bike throttle. I don’t want to use a cord while riding a skateboard/I would have to use two throttles because of both the controllers since I’m doing a dual wheel setup.
And how would I connect the battery to two controllers?
Rohan Sharma I have been trying to do the same thing. I read online that the e bike throttle plus wire is 5v and that the receiver can handle 6 volts. So it should be ok, but correct me if I am wrong. Mrcop said in a comment down below that you can charge the battery with the original charger if you cut of the original charger plug (or put it directly on to the battery wires).
@@douwejansen7278 how to know the charging time? Level? The charger has 3 pins and need to be plugged into its connector. How to connect directly to the battery?
does it turns with the controller much faster than the og motherboard on it??? and additional the battery is 10s lipo , what the controller specs are? your links not working anymore...
Hello, what model ebike controller did you use? If possible a link. Thank you!
Daniel hi, just any brushless 36v 350w controller will work
MrCop thanks so much
I seem to have mine set up in the same way, but when I turn the throttle it only makes three clicking noises and the motor doesn't move. Any idea why this could be? My motor controller also seems to have many more wires than your model
Daniel hi, did u tried switching motor wires? Like mix colours and see if it works, make sure u have connected hall sensor wires right way :)
Nice job , all respects Dear , hope if you show two controllers wiring details for two wheels. Very very thanks for your help and for your time
Cherif Bouzaza you will see in my next video, i did already but ill make video how to do it :)
I'm doing this same test everything is connected but I still have no motor response
My ebike controller has no power switch cable
Should I solder the hoverboard main power line to the red positive battery line?
The wheel needs to know what speed it's going at in order to adjust its torque, otherwise it's just going to keep increasing its speed even if you hold the handle steady. Does it do that?
Expression it doesn't do that, works just perfectly.
thank you for this tutorial it was a great help !
great video what is the gray box and if I want to control each wheel individually do need 2 each items you show here thanks
polymexdf69 the grey box is e-bike controller and yes if u want to control both wheels u need 2 controllers
do you need to use the sensors or the wheels can work directly on the battery ??? thank you
will amadio it cannot work directly from battery power as this is brushless motors and and least u need controller wich one can simulate sensors job so it can work without these 5 vires :)
MrCop oh :( !! I use, Arduino , driver L298N , onde joystick ... u think it’s possible????
will amadio yeah think is possible just try :)
MrCop sure, but u can help me? I’m a bartender 😊😊
will amadio i don't know 🤷♂️ how to help u as im not pro at this things is just my hobby 😉
hey MrCop you had any luck with brakes.
my controller says yellow wire to ground.
but when I do this just turns the throttle off.
I'm guessing there is an electronic braking mechanism built in to e bike controllers I might be wrong. any ideas ?
Ben Gough not all of them have electronic breakes, i mean to use motor for brakes :)
I got a similar question. When normally driving a hoverboard, you can brake down pretty well. Is this an actual braking mechanism or is this basically "reverting" the motor direction with full speed?
I am working on a similar project and i would like to have an electronic brake in a hoverboard wheel. Thanks! :)
querythepast in a hoverboard its electric brakes, just starts rurning wheels oposite direction, u can buy controller with e-brakes
Great video,its appreciating you replying, is contrler is with in hoverboard or have to buy septateky? Pls pls do not ignore me pls.
u have to buy seperatly
Hello, i just bought the same type of motor and has 3 wires for phases, 5 for hall sensors and another one (white) . What is the white one for ?
Hi, i dont know what for the white wire, just try if it works just cut that wire 😊
White wire is usually for sensor for heat
White wire is usually the heat sensor
Hello man Tanks a Lot för Your informations, very helpful. But i need to make my scooter like Your,can you help me please?
Can you tell me which controller model?
Wah what a music penetrating my heart tnx .
Can I control 2 motor wheels at the same time with one motor driver??
No. Too much power consuption. Use one driver for either Motor and one throttle for both. Search dual controller one throttle. White cable signal is common to the 2 controllers battery goes in parallel to the two controller and red and black of throttle only from one controller
Hi, can you control speed of rotation?
Yes that's why he connected an ebike esc.( electric speed controller) unlike the hoverboard esc, you can connect a throttle and not have the gyros in the way.
Please help me how i can charge this battery when i do this
I want to know too
What speech is in the background?
More rpm on controler than howerboard gyro..?
Cristian Stirbu no, its the same
Are the hall sensor wires necessary to use?
Ozule if ur controller is smart and have option to work without hall sensor wires so u don’t need, but keep in mind if u have speedometer that comes with controller without hall sensor wires it wont show speed, milage etc.
MrCop Ok thanks
Ozule ur welcome
What if the evoke controller doesn't have hall sensor wires
Dorian Hunter i know there is controllers who could work without hall sensor wires connected.
Наш человек , взял бы синюю изоленту .
Thanks for the video, how can I make it turn in the opposite direction?
AQTA AQTA just try switching 3 motor wires with controller. :)
+AQTA AQTA hi, just try to switch places on 3 motor wires, just mix them up and see.
What should I do if I want to use arduino potentiometer instead of throttle.
Fatih Karaokur hope someone can answer for u this as i cant sorry :)
The link for the speed controller doesn’t work
Hi, I connected the control unit to the wheels and the speed control but it works only in weightlessness, can you tell me why?
Giordano Brugnoni I don’t know, did u tried switching power cables from the wheel?
Yes, I tried, only the direction of rotation changes, when I tried it on my drift trike has no acceleration it seems that the engine runs idle. I have a 36V 350W control unit
Giordano Brugnoni did u checked 5 wires of hall sensor? Do u connect them right way?
I followed the colors of the 5 wires but it does not change anything. can you tell me that tention must come out of those 5 wires? perhaps the unit that I have is not 'suitable anywhere I would not bother you over you have been very kind and I thank you.
Giordano Brugnoni I can’t tell u man as i don’t know, is just my hobby, i know basic stuff and nothing more 😂
How to connect two speed controller?
Hello, Is your controller 60 degree? Or 120 degree?
Eren Sadıkoğlu hi, i dont know sorry
How to charge the battery?
you need tu use the charger that came with the hoverboard and use it
The link dosen’t work, Can you say what the model of the controller is
Just search anywhere 36v brushless motor controller
👍👍👍👍👍👍👍👍👍👍👍
Amigo ode compra essa controladora.Edvandro do Rio de Janeiro Brasil
work on 2 or 1 motor?
One
@@MrCopcreator a ok thanks you
How do you charge the battery
I use charger
That’s a awesome idea thanks 🙏🏻
☠️ I've been experiencing extremely dangerous episodes of the motor not stopping as soon as I turn the throttle , related to high humidity conditions ! I think it's because the humidity increases conductivity of the hall sensors in the throttle . can you recommend a good throttle ? I think the manufacturers are going to have to make them water proof. I experienced the same issue with a different throttle , battery and controller. just using the bike after a rain storm is enough to cause the issue. We must have a throttle will a switch to cut power ! ☠️ Also stop using hot glue on the Hall sensors ! It melts were I live ! And make the throttle not Fall apart so easy , and they need to be made with softer grips or made to accept normal grip's.
Hi. Im building something like that, but does anyone have any idea how to charge a hoverboard battery out of the hoverboard? Some type of a balance charger?
Use same charger as it was on hoverboard
@@MrCopcreator If i have the battery, the blue one, but no hoverboard, you cannot charge it, because the ends are not the same. The hoverboard has an XT60 female ending, but the charger is some 3 pronged circular thing that connects to the actual hoverboard. If I don't have a hoverboard, but I have a battery, how do I charge it?
@@AbidR oh man if u having problems with charging already so what next u gonna do? 😊 charger plug in hoverboard u need to use it has 2 wires going out, this 2 wires gives u positive and negative. Connect them to battery +with+ and -with- and plug charger to wall and it will charge ur battery 👌
@@MrCopcreator I have more than just charging problems but thanks anyway. I might try that.
@@AbidR explain better...what i need to use? The circuit board of the hoverboard??
Can I connect two controllers to 1 battery
Yes, i do the same on my scooter
MrCop the same battery as in the video? I am struggling if my battery will handle the current for two motors and controllers. It is about the contionous discharge . My battery has 20 ampere but the 2 controllers have 18 A maximum. The motors are 350w 36v.
MrCop Can I connect 2 controllers to 1 throttle?
@@schinslam2358 yes u can 👌
@@schinslam2358 i have connected two batteries together and then controller, as one battery would not last long, better use 2 or 3
Dose it have revers?
Fpvcrew. gr yes if u have controller with self learning function
MrCop can i use reverse for a electronic brake?
R3d N3rd Channel reverse is not a good idea for brakes 😁
Very nice video
thanks
How to set up the two wheels?
Edivaldo Gomes use to controllers 😊
bravissimo si puo acquistare?
Let me guess the throttle wires: Red is power positive, black is power negative or ground, green is signal
Link wont work
where can i get the controller from?
Aboodmatari Ebay just search for electric bike controller :)
Buongiorno
Le sarei grato dato che misono cimentato a costruirlo ma dopo aver collegato centralina eccc
Come accellero quando arriva verso il max fa un rumore e si ferma
Poi o notato che quando lo spingo un po' si spegne e devo riagganciare e sganciare batteria
Perché... Mi puoi aiutare
Ho usato le ruote e la batteria di un hoverboard
Grazie
In my motor controller I have only two wires for the motor
kn babu you have dc brushed mottor controller, u need brushless controller
But how do you connect both motors
charles davis just watch video and u will see
Thankyou boy!
is there way I can contact you on Facebook thanks
polymexdf69 hi, there's is way but why u need ? Just send me message here if u need something :)
ok I have some wheels from a Hoverboard and I just need them to go forward and backward for a halloween custom I use window motors but not strong enough with the window switch it work but not enough power every year I compete at clubs
So u are trying to say that speed of that wheel is 15km/h
I'm not trying to say, I'm saying speed of that wheel is ~20km/h
alright thats what i thought. I am thinking about making electric scooter but I dont know if Its okay if I use one wheel(for uphill) or should I use 2 wheels.
@@leonc403 for up hill one wheel is ok, but two wheels 100 times better
hello, how to connect one controller to two controllers and two wheels?
Alex Okh u need two controllers, both connect from same battery, and one throttle for both controllers, next connect each wheel to controller and there u have it 👌
No family or friends and the duration is longer than usual suspects in a dress is what it is about th12 that's rare asf to watch idk how it works out for a clan buddy I can sign into the isaac1307 epic games KILLERD2901
Your links are some crappy ads and not what you say they are
Really?
Yes, the zipspansion links are ads
@@thecam0073 im very sorry for that, on the weekend ill fix all lings, will make it direct lincs
Hai