Here's a translation of the Maestro's description... "From a normal high-roof combination to a motorhome in no time at all. Put it in, buckle up, drive off. The box is 112 cm wide, 74 cm deep and 41 cm high when folded. When unfolded, the bed is 200 cm long. Total weight approx. 40 kg.Made of 18 mm multiplex birch. 15 mm would be better, but unfortunately it wasn't in stock in the hardware store. The drawer is made of 12 mm poplar and birch plywood."
@@andysong321 If you choose A/B softwood construction plywood, most of the voids will be filled, but it won't look too nice. It will have one "good" side and one secondary side for not showing. You could paint it for appearances. Or you can choose cabinet-quality birch hardwood plywood, which I believe is what was used in this project. Both sides are equally good in appearance. Of course the prices will be quite different.
Sheer genius!! I've been thinking about converting a cargo trailer into a camper, but I think you've just convinced me that what I should do instead is build modular components and then have "tie-down" points in the trailer to strap them in, so they can be removed or swapped around at any time. Then if I ever sell the trailer, I simply take all the modules out and re-use them elsewhere.
It's an awesome little setup. If you could lock the bed in a partial upright position it could also work as a couch. See Ladi & Margaret's youtube channel for the season 1 van tour recap posted recently. One of the tours they cover had a bed/couch setup using ropes & cleats.
Watch Jarrod Tocci on youtube. He did a video on a van that uses modular components that he can swap out completely and replace at any time. He's got lots of videos so you will likely need to search. But it's really worth it. It's a older gray haird man and the interior is a darker gray hope that helps!
Yes! Way better design than mine. I also made the mistake of building mine before I had my new 2 burner stove (I built it to fit a single burner stove). The dimensions were wrong (I couldn’t nest the stove into the spot I intended). I ended up having to rebuild 1/2 of it. I also like the idea of making it lighter by cutting out pieces.
The best part of this build is he removed a lot of excess wood while keeping it integrally strong which equates to good gas mileage. Excellent workmanship, thanks for sharing
@@kmooney1954 as a carpenter/woodworker over 20 years I can assure you the voices in your head are wrong… pallet wood is either weak junk or quite heavy. Plywood is widely used in construction due to its tremendous strength/weight ratio, however stay away from chip/particle board and Mdf- but don’t take my word for it get out and build something!💪
Jeez man. Never thought I could fall in love with a project. This is 100% one of the things I would do if I had one wish granted- master woodworking skills
obwohl ich wohl nie soetwas brauchen werde und schon gar nicht selbst bauen kann, sitze ich nun vor deinen videos und der kaffee wird kalt 😂 tolle arbeit, auch sehr schön gefilmt und geschnitten. danke für die anregungen und die entspannung beim gucken. 😊
Wow, just wow! Loved watching this being put together... Would love to get a chance to learn from and do wood working / cutting with this gentleman. What a nice creation. Was really impressed when the drawer including the cooktop folds out and over to create more workspace! Cheers
I've built a small square drop camping trailer, and I've been looking for ways to cut weight. For instance, replace large bulky 2x4 bed supports with thin white oak battons. Much less mass, far greater strength. I hadn't thought of using a high quality plywood and cutting out parts of it like that, and it's rounded so they won't split or crack along force concentration lines. Very clever. I'll have to steal that.
A true Craftsman, Excellent work and design. You're the first person on YT that knows how to mount a piano hinge. I cringe every time I see them upside down, LoL. Thank You!
I thoroughly enjoyed this video. Spent 4 months traveling australia 12 years ago living out of a ford falcon station wagon and wish I had something even close to this. Well put together and well designed.
its funny....this video showed up 4 months later....again. and again...I experience the wish to watch it again... the chosen material of video, including the music, seems to represent the attention and concentration of the project. Dear sir, you have made something really simply beatifull... It is inspiring as it is joyfull. thank you again.
Okay, I see why that one guy said a table saw makes things easier. Still don't have room for one, so I appreciate knowing how to get by with a circular saw!
Only once in my life I had the freedom of a well equipped woodshop after hours. I could move from one tool to the next to the next with a sense of momentum. Now, years later my own garage is not organized & many tools I cannot afford. Times change I guess but your video reminded me of my most enjoyable wood working times!
Love how everyone swoons over the smooth ply and clever curves, missing the lovely editing that made this enjoyable to watch ☺️ I guess the best edits are the ones you don't notice and instead just feel like you're in the room as an observer. Great job on both!
Absolutely! Great observation! Not only is it an excellent design and build, but the camera coverage and editing is a masterpiece. Must have been over a thousand editing cuts.
I live in the states, and of course you can buy the expensive pre-built camp kitchens but this was a real treat to watch. Amazing ingenuity and I learned something new!
I very much admire people who are so skilled pay so much attention to detail, design and functionality. Very well done und toi, toi, das haben sie richtig gut hin gekriegt.
I have watched many camp kitchen/drawer builds. I always wondered why no one cut out the "dead" wood, saving weight. Finally, someone did just that. Excellent project! Thank You!
I'm planning on doing a "no-build build" for my Nissan Serena, as I don't have the time, money nor skill set. But that doesn't mean that I can't get hopelessly distracted by such beautiful and creative builds (it's also very relaxing!!) Excellent work guys :)
Just came across this. I made this for Citroen Berlingo, following the plans, a jigsaw and drill. Rough , but fun and functional! Sold it with the van last month and intend to build a new one this winter, just the same because it works so well (but I will invest in a router to smooth the edges) heartily recommend!
I made something similar but my 3rd folding piece just clips onto the 2nd one . I never thought of using a small piece of wood and double hinging it . A great design and well built .
Thats straight gangster woodworking skills mixed with a ton of engineering and 100x magnifying glass attention to details. Bravo to you sir, you have executed this project and set the bar very very high.
So neat and well designed. Very satisfying to watch, thanks for posting. Watching this also made me realise how much I've been overcomplicating my measurements to get a straight cut off a sheet...
Awesome innovative design and build. I love the way you work. Truly inspirational. You gave me several ideas for my own van conversation that will require special compartment for a motorcycle as well as living space, so I’ll be working with a much bigger van. But your folding bed idea is brilliant. Thank you for sharing. Greetings from the UK. Subscribed.
Thanks for watching? Are you kidding, what a great, detailed, no bs video about how to make such a wonderfully efficient and elegant piece of extremely functional furniture. Thank you for posting!
WoW.., sowas möchte ich für meinen T4 haben. Kompakt, alles was man für ein paar Tage braucht und gut zum Zwischenlagern im Keller/Garage. Saubere Arbeit... :) Wenn jetzt noch eine kleine Zeichnung mit Maßangaben / Material für einen schmalen Euro zum runterladen dabei wäre, bekommt es auch ein Hobby-Bastler hin. ;) LG NORPUde
This is just excellent. It is exactly what I had in mind for my 2006 Ford Tourneo Connect , but seeing it in action + a video of the construction process really helps me out a lot!
Seeing how this guy gets things done makes me feel better about my skills. I don't suck, I simply lack experience and devices to make the job easier. He made it look so simple... WHICH MEANS it is probably incredibly difficult LoL
I'd love to see you build one for an SUV. I'd guess the height would be lower. I truly believe most people out there don't need a fancy setup with power outlets and plumbing. Love the simplicity of the build! Just pick up and go! Awesome Job!
😳 Inventive creation; I could tell early in the video that this build took some real planning but did not expect the finish. Impressive and inspiring!! Thank you for the video Brother ❣️ Happy Camping!! 😎👍👍💯
Super Workshop setup mit absolut flexibler Ausstattung und sehr kreativer Umgang mit den Werkzeugen. Das aussparen von Gewicht ist genial. Wirklich sehr kreativ, effizient und inspirierend!
Hab mir die Anleitung via PDF gekauft, sehr hilfreich und wirklich zu empfehlen! Danke für die tolle Hilfe. Konnte die Box dank der Maße auf meine Bedürfnisse zuschneiden. Alles perfekt bebildert und dank Materialliste einfach zu bestellen.
What a amazing project. I been dreaming of something like that for my car for some years now. Easy to stop were you want, to make some food or to sleep a few hour before you hit the road again. Just love it. Best wishes from Jan in Norway
Hi there, Just to say maximum respect, I can see that You obviously are highly skilled. I am retired now but I was classically trained in woodworking, and among other things woodworking I fitted out narrow boats. I have just bought an old volvo estate so I'm getting inspiration for a small kitchen in her. Best Wishes Jahmahrah De'Safilli
If anyone is looking for plans for a similar box feel free to text me. I´ve taken the time to 3D design a Box that I built for my Volkswagen Caddy in Google SketchUp. The design consists all measures and I even made a cutting layout for the necessary 20 planks on two standard plywood planks with dimensions 250x125 cm.
Who the heck is pressing the dislike button this is genius I’ve seen a lot of camper builds this one is truly in the league of its own and can be removed and the vehicle used as normal total genius big thumbs up and like from me 👍🏼
Whaouh C'est impressionnant la maitrise. Je suis bluffée ! Je viens de m'acheter un Caddy VW normal, et je vais m'inspirer de vos vidéos pour son aménagement. Merci beaucoup de partager !!! Joyeuses fêtes !
Großartig!!! Super Anleitung! Das einzige, was ich an meinem Versuch, das anzuwenden, ändern werde, ist einen Mittelgang freizuhalten als Sitzmöglichkeit. Ansonsten die perfekte Vorlage!
Bin total begeistert, genau was ich gesucht habe für unseren Dokker. Genial einfach bzw praktisch gehalten. Vielen Dank fürs Teilen. Plan wird bestellt ;)
@@bommeleher A lot of people? I have not met someone with a workshop like that yet. Anyway, I wish I had a workshop like that and be as skillful as he is
@@PENTHESILEIA1000 hmm perhaps it depends also if you are living in the city or in town... I know a lot of people with more and bigger tools =) You just have to start, things like this are not so complicated once you ve started
Here's a translation of the Maestro's description... "From a normal high-roof combination to a motorhome in no time at all. Put it in, buckle up, drive off. The box is 112 cm wide, 74 cm deep and 41 cm high when folded. When unfolded, the bed is 200 cm long. Total weight approx. 40 kg.Made of 18 mm multiplex birch. 15 mm would be better, but unfortunately it wasn't in stock in the hardware store. The drawer is made of 12 mm poplar and birch plywood."
Thank you!
there are a lot of different plywood, which one should we choose ? Thanks a lot!
s
Thanks for the explanation @dave coke
@@andysong321 If you choose A/B softwood construction plywood, most of the voids will be filled, but it won't look too nice. It will have one "good" side and one secondary side for not showing. You could paint it for appearances. Or you can choose cabinet-quality birch hardwood plywood, which I believe is what was used in this project. Both sides are equally good in appearance. Of course the prices will be quite different.
Sheer genius!! I've been thinking about converting a cargo trailer into a camper, but I think you've just convinced me that what I should do instead is build modular components and then have "tie-down" points in the trailer to strap them in, so they can be removed or swapped around at any time. Then if I ever sell the trailer, I simply take all the modules out and re-use them elsewhere.
It's an awesome little setup. If you could lock the bed in a partial upright position it could also work as a couch. See Ladi & Margaret's youtube channel for the season 1 van tour recap posted recently. One of the tours they cover had a bed/couch setup using ropes & cleats.
Watch Jarrod Tocci on youtube. He did a video on a van that uses modular components that he can swap out completely and replace at any time. He's got lots of videos so you will likely need to search. But it's really worth it. It's a older gray haird man and the interior is a darker gray hope that helps!
Was die Liegefläche betrifft, der beste Ausbau eines Dokkers, den ich bisher auf YT gesehen habe. Danke 👍
The double hinge spacer solution for folding in the bed-panels was just briljant!
Could someone explain to me why this is necessary? what would happen with just 1 hinge?
@@TarikEddial It allows the third panel to fold in between the the other two panels.
Yes! Way better design than mine. I also made the mistake of building mine before I had my new 2 burner stove (I built it to fit a single burner stove). The dimensions were wrong (I couldn’t nest the stove into the spot I intended). I ended up having to rebuild 1/2 of it. I also like the idea of making it lighter by cutting out pieces.
The universal language of carpentry, with a dialect of ingenuity. Wonderful video!
The best part of this build is he removed a lot of excess wood while keeping it integrally strong which equates to good gas mileage. Excellent workmanship, thanks for sharing
And it also makes for ease of lifting in and out of the van!!
Great build and clever ideas - but: I keep hearing in my head "Wooden Pallets". Less work to customize and not as heavy as plywood.
@@kmooney1954 as a carpenter/woodworker over 20 years I can assure you the voices in your head are wrong… pallet wood is either weak junk or quite heavy. Plywood is widely used in construction due to its tremendous strength/weight ratio, however stay away from chip/particle board and Mdf- but don’t take my word for it get out and build something!💪
@@MellyoftheSpring What is the approximate weight?
@@franl5585 idk, I didn't build it. I think you meant to ask/tag somebody else.
You have to admire a man who refuses to replace dull cutting tools and keeps using them long after they start smoking and burning holes in the wood.
Absolutely the best designed and most versatile camping box I have seen throughout my year of research. This has inspired me, thank you.
lol really. Its pretty generic.
Jeez man. Never thought I could fall in love with a project. This is 100% one of the things I would do if I had one wish granted- master woodworking skills
I've been camping my whole life. On foot, bicycle, motorcycles, and overlanding. I appreciate an easy and quick setup like this. Awesome.
Easy when you got skills. Good job playing.
DIE Camping-Box. Vorbildlich geplant und eindrucksvoll umgestzt. Eine Wohltat zum Anschauen.
This is so far the best truck camping build I have seen yet. Easy to move in and out and nice design.
obwohl ich wohl nie soetwas brauchen werde und schon gar nicht selbst bauen kann, sitze ich nun vor deinen videos und der kaffee wird kalt 😂 tolle arbeit, auch sehr schön gefilmt und geschnitten. danke für die anregungen und die entspannung beim gucken. 😊
One word "BRILLIANT" !!. Hope you won't mind me copying your idea as I'm turning my forester into an overlander adventure vehicle. Thank you 😊
I’m so interested in your post. Would love to do this with my Forester
Wow, just wow! Loved watching this being put together... Would love to get a chance to learn from and do wood working / cutting with this gentleman. What a nice creation. Was really impressed when the drawer including the cooktop folds out and over to create more workspace! Cheers
Your work flow and methods seems so practical and efficient! And such a simple yet effective workshop set up. Truly inspiring!
I've built a small square drop camping trailer, and I've been looking for ways to cut weight. For instance, replace large bulky 2x4 bed supports with thin white oak battons. Much less mass, far greater strength. I hadn't thought of using a high quality plywood and cutting out parts of it like that, and it's rounded so they won't split or crack along force concentration lines. Very clever. I'll have to steal that.
Could not figure this out until the end, very very clever design, every inch of space used, and as light as possible 👍
no one could figure it it out. it would have helped if he narrated the process.
A true Craftsman, Excellent work and design. You're the first person on YT that knows how to mount a piano hinge. I cringe every time I see them upside down, LoL. Thank You!
I thoroughly enjoyed this video. Spent 4 months traveling australia 12 years ago living out of a ford falcon station wagon and wish I had something even close to this. Well put together and well designed.
There's a company in Australia called Drifta, they have a large selection to choose from.
its funny....this video showed up 4 months later....again.
and again...I experience the wish to watch it again...
the chosen material of video, including the music, seems to represent the attention and concentration of the project.
Dear sir, you have made something really simply beatifull...
It is inspiring as it is joyfull.
thank you again.
Thank you very much!
Okay, I see why that one guy said a table saw makes things easier. Still don't have room for one, so I appreciate knowing how to get by with a circular saw!
Look for a "track saw" or "poor man's track saw"
Only once in my life I had the freedom of a well equipped woodshop after hours. I could move from one tool to the next to the next with a sense of momentum. Now, years later my own garage is not organized & many tools I cannot afford. Times change I guess but your video reminded me of my most enjoyable wood working times!
Love how everyone swoons over the smooth ply and clever curves, missing the lovely editing that made this enjoyable to watch ☺️ I guess the best edits are the ones you don't notice and instead just feel like you're in the room as an observer. Great job on both!
Thank you! :)
Absolutely! Great observation! Not only is it an excellent design and build, but the camera coverage and editing is a masterpiece. Must have been over a thousand editing cuts.
He made it sure look easy. Editing was great, too.
@@GVMCorner Respekt. Was kostet ?
Well said, exactly what I was thinking. Awesome job from all angles👍
Not at all what I'mlooking for but this is a well designed and executed bed/chuck wagon box. Master cabinet maker fro the US. Well done sir!
I live in the states, and of course you can buy the expensive pre-built camp kitchens but this was a real treat to watch. Amazing ingenuity and I learned something new!
I very much admire people who are so skilled pay so much attention to detail, design and functionality.
Very well done und toi, toi, das haben sie richtig gut hin gekriegt.
I have watched many camp kitchen/drawer builds. I always wondered why no one cut out the "dead" wood, saving weight. Finally, someone did just that. Excellent project! Thank You!
I'm planning on doing a "no-build build" for my Nissan Serena, as I don't have the time, money nor skill set. But that doesn't mean that I can't get hopelessly distracted by such beautiful and creative builds (it's also very relaxing!!) Excellent work guys :)
This is seriously popping huge ideas for camper kitchen issue.
Good thinking, thanks!
Just came across this. I made this for Citroen Berlingo, following the plans, a jigsaw and drill. Rough , but fun and functional! Sold it with the van last month and intend to build a new one this winter, just the same because it works so well (but I will invest in a router to smooth the edges) heartily recommend!
I think that is one of the best builds for a 'hatchback' that I have seen!
Ich bin total begeistert von Deinen Ideen und Deinem handwerklichen Können 👍👍👍
Danke fürs Zeigen 🤗
This was a pleasing process to watch. Everything was so precise, well done!
By far the best so far all the SUV camper add-ons I have seen in you tube. Very creative and thanks very much.
I made something similar but my 3rd folding piece just clips onto the 2nd one . I never thought of using a small piece of wood and double hinging it . A great design and well built .
Thats straight gangster woodworking skills mixed with a ton of engineering and 100x magnifying glass attention to details. Bravo to you sir, you have executed this project and set the bar very very high.
Thanks a lot!
I wish I was friends with this guy. Love to have him mentor and help me build one for my truck.
So neat and well designed. Very satisfying to watch, thanks for posting.
Watching this also made me realise how much I've been overcomplicating my measurements to get a straight cut off a sheet...
Awesome innovative design and build. I love the way you work. Truly inspirational. You gave me several ideas for my own van conversation that will require special compartment for a motorcycle as well as living space, so I’ll be working with a much bigger van. But your folding bed idea is brilliant. Thank you for sharing. Greetings from the UK. Subscribed.
Thanks for watching? Are you kidding, what a great, detailed, no bs video about how to make such a wonderfully efficient and elegant piece of extremely functional furniture.
Thank you for posting!
And the plans are cheap as chips, $8 , wow!
WoW..,
sowas möchte ich für meinen T4 haben.
Kompakt, alles was man für ein paar Tage braucht und gut zum Zwischenlagern im Keller/Garage.
Saubere Arbeit... :)
Wenn jetzt noch eine kleine Zeichnung mit Maßangaben / Material für einen schmalen Euro zum runterladen dabei wäre,
bekommt es auch ein Hobby-Bastler hin. ;)
LG NORPUde
You have some serious skills there, sir. Still not sure what is more impressive - your design or your skills. Absolutely amazing!🔥🤙🏼
This is just excellent. It is exactly what I had in mind for my 2006 Ford Tourneo Connect , but seeing it in action + a video of the construction process really helps me out a lot!
You did an excellent job on this. One of the very best I have seen. That includes manufactured or DYI! Your design is the best!
It must’ve taken a lot of practice to be able to work that fast, good job man!
You are indeed extraordinary,not just making,but you have also thought about making the drawer lighter on the scale,you are amazing
Bravo! What a good smart job. Throw that brave hound a bone for protecting you during your labor.
For a minute there I thought I was reading one of my own comments.
Seeing how this guy gets things done makes me feel better about my skills. I don't suck, I simply lack experience and devices to make the job easier. He made it look so simple... WHICH MEANS it is probably incredibly difficult LoL
Top! Gefällt mir sehr gut von der Funktionalität und Aussehen her😄
Wow. I wish I was 1/16 as good as this guy at wood working.
The pace of this video was perfect.
You are a human CNC machine. Nice work!
I'd love to see you build one for an SUV. I'd guess the height would be lower. I truly believe most people out there don't need a fancy setup with power outlets and plumbing. Love the simplicity of the build! Just pick up and go! Awesome Job!
Thanks! This is the best I've seen presented on TH-cam. You inspired me, I'll build a for my Peugeot Tepee. I'm your subscriber.
? ,, ,,,,,,z x
I wasn’t really sure where all the cutting and drilling was going to wind up but in the end it all came together! Very cool idea!!
What a beautiful design! Would love to make something like this for my own vehicle!
Your craftsman is immaculate! Your wor is like human CNC 🙌👍
Bloody Good Mate. This would probably work for my Ford station wagon too.
Most Aussie comment 🤣
😳 Inventive creation; I could tell early in the video that this build took some real planning but did not expect the finish. Impressive and inspiring!! Thank you for the video Brother ❣️
Happy Camping!! 😎👍👍💯
I live in Japan , wanna do diy like you... Wonderful Vanlife!!!
Super Workshop setup mit absolut flexibler Ausstattung und sehr kreativer Umgang mit den Werkzeugen. Das aussparen von Gewicht ist genial. Wirklich sehr kreativ, effizient und inspirierend!
That is absolutely stunning! What an amazing piece of design! Thanks so much for the vid.
One of the better designs and minimalist simplicity. Well done.
That is so cool. I am converting a bigger van than yours. But it has given me few ideas. So thank you 😁
I find that I’m good with my hands, but damn, the craftsmanship on this “DIY” project is next to professional level lol
More like a crash course in manufacturing 😂
This camping box is absolutely amazing! I wish I could build it myself.
It's an absolute pleasure to watch a true tradesman at work. Brilliant design too. 10 out of 10
This is exactly what I want to build!
Hab mir die Anleitung via PDF gekauft, sehr hilfreich und wirklich zu empfehlen! Danke für die tolle Hilfe. Konnte die Box dank der Maße auf meine Bedürfnisse zuschneiden. Alles perfekt bebildert und dank Materialliste einfach zu bestellen.
Herzlichen Dank, besonders auch für die Ruhe🙏🙏🙏
What a amazing project. I been dreaming of something like that for my car for some years now. Easy to stop were you want, to make some food or to sleep a few hour before you hit the road again. Just love it. Best wishes from Jan in Norway
Thank you!
Everyone has seen so many of these van conversions they become boring- except this one. Exceptional !
amazing, you did such a great job in making it look easy and doable.
Hi there, Just to say maximum respect, I can see that You obviously are highly skilled. I am retired now but I was classically trained in woodworking, and among other things woodworking I fitted out narrow boats. I have just bought an old volvo estate so I'm getting inspiration for a small kitchen in her. Best Wishes Jahmahrah De'Safilli
Oh wow that’s SO clever!!!! Think I need to make one for my Vito ❤️
I love that your floor is tiled but your walls are OSB. I LOVE it.
Superbe travail,propre simple et efficace ,bravo 😉
Richtig schön!
Es macht auch mächtig Spaß dir zuzuschauen.
Ich beneide dich um deine Werkstatt!
Obrigado por compartilhar! Parabéns!! Eu estava necessitando de um projeto justamente como este!!
Danke noch mal für deinen tollen Bauplan, ist jeden Cent wert. Meine Box ist nun auch fertig und wie ich finde, dank deiner Vorarbeit, super gelungen.
Freut mich, danke!
You need to make and sell plans for this ASAP. You can capitalize on the fact that this video will absolutely go viral.
I’ll buy the plans for a few €€.
Absolutely
Me too!!
Patent it first. Design it so it can be assembled easily like an IKEA furniture.
If anyone is looking for plans for a similar box feel free to text me. I´ve taken the time to 3D design a Box that I built for my Volkswagen Caddy in Google SketchUp. The design consists all measures and I even made a cutting layout for the necessary 20 planks on two standard plywood planks with dimensions 250x125 cm.
Who the heck is pressing the dislike button this is genius I’ve seen a lot of camper builds this one is truly in the league of its own and can be removed and the vehicle used as normal total genius big thumbs up and like from me 👍🏼
Thanks very much!
Wow, that is so cool. Outstanding job.
Whaouh C'est impressionnant la maitrise. Je suis bluffée ! Je viens de m'acheter un Caddy VW normal, et je vais m'inspirer de vos vidéos pour son aménagement. Merci beaucoup de partager !!! Joyeuses fêtes !
Merci beaucoup!
I love it ! Just perfect ! Give us inspirations. Thank you.
What an amazing peice of work!! Thankyou for showing your excellent design and woodwork skills😊
Dog: "What's my human up to now?"
Großartig!!! Super Anleitung! Das einzige, was ich an meinem Versuch, das anzuwenden, ändern werde, ist einen Mittelgang freizuhalten als Sitzmöglichkeit. Ansonsten die perfekte Vorlage!
Who the heck is giving this a thumb down?!
some people use the thumb down feature to keep track of videos they already watched. not saying it makes sense.
They are actually thumbs up from australia
@@egek1997 Best reply!!
Fingers too fat to isolate the thumbs up button... Poor navigation 🤣
Probably manufacturers of pull out camping kitchens 😀
Brilliant in so many ways. The end result is awesome, the use of tools, squares and guides .Learned heaps, now all I need is a van.
Excelente projeto. Parabéns!
Bin total begeistert, genau was ich gesucht habe für unseren Dokker. Genial einfach bzw praktisch gehalten. Vielen Dank fürs Teilen. Plan wird bestellt ;)
Seems everyone is getting ready to move off grid.
Отлично!
Взял за основу с некоторыми своими доработками.
Всё просто и со вкусом. 👍Спасибо!
You made me realize I wasted a lot of money on a table saw.
And I was wondering why he hasn't bought one. Lol. I do like his technique of the wooden spacer that he used to set up the cut. I will steal that one.
Thought long and hard about table saw. Decided on track/plunge saw. Good result
A good track saw will walk circles around a table saw all day, get a good one like a festool and you don't even need the offset board.
@@micahshaeffer I didn't know those existed. I might just get one.
Great creation and awesome editing ... the sound of feet shuffling around made me smile everytime :)
Bravo sir 👏 🙌 👍
Do you offer plans for people?
When I buy my new vehicle I would love to do something like this instead of a converted van
I was thinking the same thing . . .
Sehr sehr klasse geworden und deine Arbeit ist so präzise und gut, mir fehlen die Worte...👍👍👍👍👍🤏
OK ... actually this is not a Do It Yourself this is Do It By a Professional ...
Why? A lot of people are having a workshop like that and they are far away from beeing professional?!
@@bommeleher A lot of people? I have not met someone with a workshop like that yet. Anyway, I wish I had a workshop like that and be as skillful as he is
@@PENTHESILEIA1000 hmm perhaps it depends also if you are living in the city or in town... I know a lot of people with more and bigger tools =)
You just have to start, things like this are not so complicated once you ve started
Just bought the drawings, definitely building a modified version. Love how you have taken the weight out, i would never thought of doing that.